Kruger Matz KM0560 Wireless Speaker Owner’s Manual

IT`S JUST TAKE
KM0560 Wireless speaker
OWNER’S MANUAL

SAFETY INSTRUCTION

1. Place the device on a flat, stable surface.
2. Do not place heavy objects on the device.
3. Do not place anything in the speakers’ interior.
4. Do not place the device in close proximity to heat sources, such as radiators etc. Do not place the device on unstable surfaces.
5. Position the device in a properly ventilated place. Do not obstruct ventilation by covering ventilation openings.
6. Protect this device from humidity, water and other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
7. Before connecting the device to the power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
8. Keep the volume at a reasonable level throughout entire time of using the speaker. To prevent damage to your hearing, do not raise the volume too high.
9. If you experience tinnitus, discomfort or other concerning behaviors, stop using the device immediately.
10. Make sure, that the device is placed away from electrical devices that generate
11. Disconnect from power outlet if the device is not going to be used for a long time
12. Do not handle this device with wet hands.
13. Do not use this device if it has been damaged.
14. Do not attempt to repair this device yourself. In case of damage, contact the authorized service point for a check-up or repair.
15. Always disconnect the product from the power source before cleaning.
16. lean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.

TOP PANEL

1. Increase bass effect button
2. Increase volume on BT and AUX mode / next channel om Radio mode
3. Pause / Play in BT and AUX mode / Scan FM channel automatically
4. Decrease volume on BT and AUX mode / Last channel on Radio mode
5. Microphone volume knob
6. Sound effects control panel
7. Microphone input
8. AUX input
9. USB input| 10. Micro SD slot
11. LED indicator
12. DC 9 V 1,5 A input
13. TWS button
14. Power switch
15. Mode button
16. Menu button (bass and treble settings, value change with volume buttons)
17. Front LED light mode change and turn off light button
18. Sound effects button
19. Display
20. Microphone echo volume knob
---|---

REMOTE CONTROLLER

1. Power button
2. Mode / light button
3. Previous track button
4. Volume down
5. Volume up
6. Choose song number correctly / Set FM frequency in Radio mode| 7. Play / pause / TWS function button
8. Equalizer
9. Mute
10. Stop button
11. Repeat track
12. Next track button
---|---

OPERATION

Turning on / off / volume adjustment
To turn on the speaker, press and hold the power button for about 2 seconds. Follow the same procedure to turn off the speaker. To increase or decrease the volume, hold down the +/- button until the desired value is reached. The speaker illumination turns on automatically when you turn on the device.  To change the lighting mode or turn off the lighting, press the light button repeatedly until the desired option is selected.

Playing via Bluetooth
If there is no external device connected (USB or AUX), the speaker will automatically go to Bluetooth mode, after turning it on. If there is an external device connected, press the mode button, to go to Bluetooth mode. On the external device, search for Bluetooth devices and connect to the speaker (KM Party DJ).
Played music can be controlled on the external device, with the buttons on the speaker, or by the remote controller.

Playing via USB
After plugging the USB drive, the speaker will automatically go to  SB mode. To control played music, use buttons on the speaker or use a remote controller.

Playing via AUX
After connecting to the AUX socket, press the mode button until the diode signaling the AUX mode turns on. Use your source device to control the music that is playing.  dressing the Play / Stop button while music is playing will mute the speaker. Pressing it again turns the sounds back on.

FM Radio
To play the radio, press the mode button, until the LED indicator Radio flashes. Press the play button to run an automatic scan. Saved stations can be switched with the volume up and volume down buttons. To manually set the FM frequency, use the numeric keypad on the remote control, e.g. to select the frequency 98.3, dial 983.

Microphone
After connecting the microphone to the microphone input, it can be used immediately. Note: microphone cord has to be mono. The set also includes a wireless microphone that connects to the speaker immediately after turning it on.

TWS function
TWS function allows for playing from one source on two speakers. After turning on the speakers, simultaneously press and hold the TWS button on both speakers. The connection will be signaled with an audio cue. After connecting the external device, the sound will be played on both speakers.

Sound effects
The device has a control panel with pre-recorded sound effects that can be used in any speaker mode. To turn them on, press the button to change active sound effects. The effects are divided into 4 categories: techno music effects, synthesizer effects 1, synthesizer effects 2, and drum effects. To switch between categories, press the control panel button.

Charging
The low battery level will be indicated by the flashing LED  indicator. To charge the speaker, connect the plug of the included mains charger to the speaker charging port, and the charger itself should be connected to a mains socket.

SPECIFICATION

• Power: 30 W

• Impedance: 6 Ohm

• Frequency response: 50 Hz ~ 20 kHz

• S/N ratio: >85 dB

• Drive unit: 2 x 6,5″ + 1,5″

• FM frequency: 87,5 – 108 MHz

• Bluetooth: 5.0

• Supported formats: MP3

• TWS function (connect two speakers

• Sound effects control panel

• X-BASS function

• I/O:
  • USB port 2.0
  • 1 x microphone input (Jack 6,3 mm
  • AUX input (Jack 3,5 mm)
  • Micro USB input
  • Micro SD slot

• Power supply: 9 V / 1,5 A

• Battery: 7,4 V / 3600 mAh

• Dimensions: 470 x 225 x 240 mm

• Weight: 4,7 kgV

Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that Wireless speaker KM0560 is consistent with directive 2014/53/ UE.
The full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl.

LEARN MORE
For more information on this device visit: www.krugermatz.com.  Read the owner’s manual carefully before using it.  Visit www.krugermatz.com website for more products and accessories. In case of any doubts or questions reach out to our Frequently Asked Questions section.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
It is forbidden to place equipment waste marked with the symbol of a crossed- out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

www.krugermatz.com
Kruger Matz  is a registered trademark

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>