Nedis ACON2510BK Digital to Analogue Audio Converter User Manual
- June 5, 2024
- nedis
Table of Contents
ACON2510BK Digital to Analogue Audio Converter
User Manual
Preface
Thank you for purchasing the Nedis ACON2510BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is a converter for coaxial or toslink digital audio to analog L/R audio.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Digital to Analogue Audio Converter
---|---
Article number
|
ACON2510BK
Dimensions (l x w x h)
|
51 x 41 x 26 mm
Weight
|
78 g
Power input
|
5.0 VDC ; 0.6 A
Operating temperature
|
0 °C – 70 °C
Operating humidity
|
10 % – 85 % (RH)
Storage humidity
|
10 % – 85 % (RH)
Power consumption
|
3.0 W
Supported bitrates
|
32 kHz 24-bit
44.1 kHz 24-bit
48 kHz 24-bit
96 kHz 24-bit
Main parts (image A)
A
1. R/L output
2. AUX output
3. Power indicator LED
4. Coaxial input
5. Toslink female input
6. DC power port
7. Power cable
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- Do not expose the product to water or moisture.
- Only use the provided power cable.
- Disconnect the product from the power source and other equipment if problems occur.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installing the product
Make sure all the devices you want to connect have been switched off.
1. Plug a twin R/L cable (not included) into the R/L output A1 or plug an AUX cable or headphone (not included) into the AUX output A2.
2. Plug the other end of the cable into your audio output device.
3. Plug a coaxial cable (not included) into the coaxial input A4 or plug a Toslink cable into the Toslink female input A5.
4. Plug the other end of the cable into your audio output device.
Use
Using the product
1. Plug the power cable A7 into the power port A6.
2. Plug the other end of A7 into a power outlet.
- The product switches on.
- The power indicator LED A3 lights up.
3. Switch on the connected audio devices.
Maintenance
- Disconnect the product before cleaning.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---