Nedis RDFM5200BN FM | AM Radio User Manual

: June 5, 2024
: nedis

RDFM5200BN FM | AM Radio

Nedis RDFM5200BN FM | AM Radio

User Manual

Preface

Thank you for purchasing the Nedis RDFM5200BN.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The product is exclusively intended to be used as a radio with alarm clock.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

FM/ AM Radio

---|---

Article number

|

RDFM5200BN

Power input

|

5 VDC / 1 A

Speaker RMS

|

2 x 3 W

Speaker peak power

|

2 x 9 W

Radio bands

|

FM / AM

FM frequency range

|

87.5 – 108.0 MHz

AM frequency range

|

522 – 1620 KHz

Number of FM preset stations

|

10

FM tuning

|

Digital

Bluetooth® version

|

5.0

Bluetooth® frequency range

|

2402 – 2480 MHz

Maximum transmit power

|

4 dBm

Battery capacity

|

1200 mAh

Battery type

|

Rechargeable built-in Lithium-ion

Maximum battery play time (at 50% volume)

|

Up to 4 hours

Standby time

|

Up to 120 hours

Maximum Charging time

|

Up to 3 hours

Display

|

Yes

Alarm clock

|

Yes

Snooze function

|

Yes

Connections

|

Aux input, micro USB

Main parts (image A)

A

1. Mode wheel

2. Power button

3. Clock button

4. Alarm button

5. Previous button

6. Next button

7. Play/pause/scan button

8. LED display

9. Volume wheel

10. Antenna

11. Micro USB port

12. AUX port

13. Micro USB cable

14. AUX cable

Safety instructions

WARNING

|

To prevent possible hearing damage, do not listen at high volume levels for long periods.

---|---

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this manual.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if problems occur.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
Do not immerse the product in water.
Do not use the product in wet or damp environments.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Disconnect the product from the power source and other equipment if problems occur.
Do not leave a battery on prolonged charge when not in use.
After extended periods of storage, it may be necessary to charge and discharged the cells or batteries several times to obtain maximum performance.
The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
Charge the battery for at least 3 hours before using the product for the first time.
Only use the provided USB charging cable.
During charging, the product must be placed in a well-ventilated area.
Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.

Explanation of the safety symbols on the product

|

Indication to explain that the product can cause hearing damage. Do not listen at high volume levels for long periods.

---|---

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Indication to explain that the product can cause hearing damage. Do not listen at high volume levels for long periods.

|

Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Charging the product

Connect the micro USB cable A r to the micro USB port A w and a USB adapter (not included).

Use

Setting the clock

1. Press the power button A 2 to switch on the product.

2. Press clock button A 3.

The time is shown on the LED display A 8.

3. Press and hold A 3 to enter time setting.

4. Press previous or next button A 56 to set the hour.

5. Press and hold A 3 to select the minutes.

6. Press A 5 or A 6 to set the minutes.

7. Press A 3 to confirm the set time.

FM mode

Adjust the length and angle of the antenna A10 to improve reception.

1. Turn the mode wheel A 1 to select FM mode.

An FM indicator shows in A 8.

2. Press and hold play/pause/scan button A 7 to search for FM stations.

3. Press A 5 or A 6 to tune to another station.

AM mode

Adjust the length and angle of the antenna A10 to improve reception.

1. Turn A 1 to select AM mode.

An AM indicator is shows in A 8.

2. Press A 7 to search for AM stations.

3. Press A 5 or A 6 to tune to another station.

Bluetooth mode

1. Turn A 1 to select Bluetooth (BT) mode.

An BT indicator is shown on the LED display A 8.

2. Enable Bluetooth on the device you want to pair the product with.

3. Select “RDFM5200BN” from the list of available Bluetooth devices on your device.

Using the alarm

1. Press the alarm button A 4 to select the alarm.

The selected alarm shows in A 8.

2. Press and hold A 4 to enter alarm setting.

3. Press A 5 or A 6 to set the hour.

4. Press and hold A 4 to select the minutes.

5. Press A 5 or A 6 to set the minutes.

6. Press A 4 to exit the alarm settings.

Press any button to shut off the alarm.
When no button is pressed, the alarm stops automatically after 10 seconds.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RDFM5200BN from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/rdfm5200bn#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands