BRANDMOTION SUTV-8849 SummitView Jeep Wrangler Third Brake Light Add On Instruction Manual

June 4, 2024
BRANDMOTION

BRANDMOTION SUTV-8849 SummitView Jeep Wrangler Third Brake Light Add On

BRANDMOTION SUTV-8849 SummitView Jeep Wrangler Third Brake Light Add On fig
\(2\)

Recommended Tools DIFICULTY LEVEL

BRANDMOTION SUTV-8849 SummitView Jeep Wrangler Third Brake Light Add On fig
\(3\)|
Install Time
Questions? Call the Brandmotion technical support line at 734-619-1250 or CLICK HERE

Kit Contents:
1x LED Third Brake Light and OE Connector

Access the Radio

Install the 3rd Brake LightBRANDMOTION SUTV-8849 SummitView Jeep Wrangler
Third Brake Light Add On fig \(6\)

  1. Remove the spare tire
  2. Locate and remove one #1 Philips holding the camera onto the bracket
  3. Line the mounting hole from the new brake light bracket up with the mounting hole of the Camera and mounting bracket and reinstall the one #1 Philip screws.
  4. Route cable along the Camera harness and follow the same route as factory 3rd brake light harness to factory opening in rear door.
  5. Remove cover on the inside of rear door and unplug factory 3rd brake light harness and install new brake light harness.
  6. Unplug factory brake harness and plugin our replacement harness
  7. Test 3rd Brake Light
  8. Follow the disassembly steps in reverse order for reassembly.

WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
Installation Instructions – SUTV-8894

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BRANDMOTION User Manuals

Related Manuals