ASHLEY STR-DL-0096 2-Pack Table Lamp User Manual

ASHLEY STR-DL-0096 2-Pack Table Lamp

Customer service:

Thank you for choosing this table lamp. Please read this user manual carefully and keep it for future reference.

Please check the table lamp and mounting accessories before set up. If you need any assistance, please first contact us by email with your Amazon order number and details. We will do our best to solve the problem for you as soon as possible.

Any displeasure with your purchase, please contact us with your order number. Thank you.

Package Content:

• 2 x Table Lamps
• 2 x Lamp Shades
• 2 x LED Bulbs
• 1 x User Manual

Product Parameter:

Product Dimension:

Installation Steps Diagram:

• H: Finial
• O: Assembled lampshade
• G: LED bulb
• F: Harp
• E: Saddle
• D: Lampstand
• I : Power wire
• A: Lampshade
• B: Lampshade bottom ring
• C: Lampshade top ring

**Simple steps:

**

Detailed Installation steps:

1. Fix the bottom ring to the buckle at the bottom of the lampshade.
2. Fasten the top ring to the buckle on the upper part of the lampshade.
3. Glue the sticky strip of the lampshade seal, and be careful to align the sealing part evenly.
4. Fix the bulb holder on the glass body, press down with a little force and tighten the screw interface.
5. Hold tight the lower part of the harp, and mount the harp’s flexible arms inside the saddle.
6. Fixed the LED bulb on the bulb base and tighten it.
7. Unscrew the finial from the harp, then put on the assembled lampshade, and tighten the final to secure the lampshade.
8. Adjust the regulating valve on the fixed knob of the final, which can rotate 15 degrees angles back and forth around the harp to make the lampshade look more horizontal and beautiful.

Warm Tips:

1. The table lamp is metal, glass and fabric, please be careful don’t use too much force when you assemble and install it.
2. This table lamp features an E26 bulb socket base.
3. When you don’t use the lamp, please switch off the power or try not to touch the lamp base when it is plugged in to save power energy to extend the lifetime.
4. The switch of the table lamp is the touch control system on the base to control the ON/OFF and dimming of the lamp. There may be some sensitivity.

Notice: After opening the top of the package box, take out all the accessories that you can see, and then open the bottom of the box. You can even take apart the foam to find accessories. If the accessories are missing or there are any problems with the installation, please contact us as soon as possible. We will try our best to help you to solve it. Please believe us.

Important Instructions

To reduce the risk of fire, electric shock, exposure to excessive UV, radiation, or injury to a person. When using electrical appliances, basic safety precautions should always be followed.

1. Before installing, cleaning lamps, and replacing light bulbs, please cut off the power supply.
2. Do not look directly at the lighted bulb. Otherwise, it will be a bit dazzling in a short time.
3. Keep the lamp away from material that may burn.
4. Do not touch the bulb while it is lit or immediately after turning off the lamp.
5. Do not use outdoors, suggest indoor use only. It is non-waterproof.
6. Do not plug or unplug the power cord with wet hands.
7. Do not use this product in humid environments or at high temperatures.
8. Do not use it to exceed the voltage, the proper voltage for the US is AC110-120V,50-60Hz.
9. If you want to replace the light bulb, please note that the maximum accepted wattage is 60W.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>