beko B5DT510446W Washer Dryer User Manual

: June 15, 2024
: Beko

Table of Contents

B5DT510446W Washer Dryer
Product Information: Washer-Dryer
Specifications
Product Usage Instructions
1. Safety Instructions
2. Important Instructions for Environment
- 2.1 Compliance with WEEE Directive
- 2.2 Package Information
3. Technical Specifications
4. Installation
5. Preliminary Preparation
6. Operating the Product
7. Maintenance and Cleaning
Q: How do I choose the right washing program?
Q: Can I use bleach in the washer-dryer?
Q: How often should I clean the detergent drawer?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

B5DT510446W Washer Dryer

Product Information: Washer-Dryer

Specifications

Model Number: B5DT510446W
Date of Manufacture: 03/04/2023

Product Usage Instructions

1. Safety Instructions

1.1 Intended Use

The washer-dryer is designed for household use and is intended
for washing and drying laundry.

1.2 Safety of Children, Vulnerable Persons and Pets

Keep children, vulnerable persons, and pets away from the
product during operation to prevent accidents.

1.3 Electrical Safety

Ensure that the product is properly grounded and the electrical
connections are secure before use.

1.4 Handling Safety

When moving or handling the product, use proper lifting
techniques to avoid injury.

1.5 Installation Safety

Follow the installation instructions provided in section 4 to
ensure safe and proper installation of the washer-dryer.

1.6 Operational Safety

Read and understand all operating instructions before using the
product. Follow all safety precautions to prevent accidents.

1.7 Drying Safety

Do not dry items that have been previously cleaned with
chemicals, as it may cause a fire hazard.

1.8 Maintenance and Cleaning Safety

Before cleaning or performing maintenance on the product,
disconnect it from the power source to avoid electrical shock.

2. Important Instructions for Environment

2.1 Compliance with WEEE Directive

Dispose of the product in accordance with local regulations to
minimize environmental impact.

2.2 Package Information

Refer to the package information provided to ensure proper
handling and disposal of packaging materials.

3. Technical Specifications

The technical specifications of the washer-dryer are as
follows:

Weight: [weight]
Dimensions: [dimensions]
Capacity: [capacity]
Power Consumption: [power consumption]
Water Consumption: [water consumption]
Noise Level: [noise level]

4. Installation

4.1 Appropriate Installation Location

Choose a suitable location for installation that meets the
specified requirements in the user manual.

4.2 Assembly of Bottom Panel Covers

Follow the instructions provided to properly assemble the bottom
panel covers.

4.3 Removing Transportation Safety Bolts

Remove the transportation safety bolts before using the product.
Refer to the user manual for detailed instructions.

4.4 Connecting to Water Supply

Connect the washer-dryer to a water supply following the
instructions provided in the user manual.

4.5 Connecting the Drain Hose to the Drain

Properly connect the drain hose to the drain to ensure effective
water drainage.

4.6 Adjusting the Stands

Adjust the stands of the washer-dryer to ensure stability and
proper leveling.

4.7 Electrical Connection

Follow the electrical connection instructions provided in the
user manual to connect the product to the power source.

4.8 Handling the Product

When moving or handling the product, take necessary precautions
to avoid injury and damage.

5. Preliminary Preparation

5.1 Sorting the Laundry

Sort the laundry based on fabric type, color, and washing
instructions before loading it into the washer-dryer.

5.2 Preparing Laundry for Washing

Prepare the laundry by removing any loose items, closing
zippers, and emptying pockets.

5.3 Tips for Energy and Water Saving

Follow the energy and water-saving tips provided in the user
manual to optimize efficiency during operation.

5.4 Start Up

Turn on the power and set the desired settings to start the
washer-dryer.

5.5 Loading the Laundry

Load the sorted laundry into the washer-dryer, making sure not
to exceed the recommended load capacity.

5.6 Correct Load Capacity

Refer to the load capacity guidelines provided in the user
manual to ensure proper loading of the washer-dryer.

5.7 Using Detergent and Softener

Follow the instructions for using detergent and softener
provided in section 5.7 of the user manual.

5.7.1 Automatic Dosing

If applicable, use the automatic dosing feature to ensure proper
detergent and softener dosage.

5.7.2 Dosage Selections, Cancellation or Use of Powder

Detergent

Choose the appropriate dosage selection or cancel the automatic
dosing feature if using powder detergent.

5.7.3 Detergent and/or Softener Running Out

Refill the detergent or softener compartments when they run out
during operation.

5.7.4 Filling Detergent or Softener into the Wrong

Compartment

If filled into the wrong compartment, remove the excess
detergent or softener and refill it in the correct compartment.

5.8 Tips for Efficient Washing

Follow the tips provided in the user manual to ensure efficient
washing results.

5.9 Tips for Efficient Drying

Follow the tips provided in the user manual to ensure efficient
drying results.

5.10 Displayed Programme Duration

Refer to the displayed programme duration to estimate the time
required for washing and drying cycles.

6. Operating the Product

6.1 Control Panel

Familiarize yourself with the control panel and its functions
before operating the washer-dryer.

6.2 Symbols on the Display

Understand the symbols displayed on the control panel to
interpret the status and settings of the washer-dryer.

6.3 Preparing the Machine

Ensure that the machine is properly set up and ready for
operation before starting a wash or dry cycle.

6.4 Selection of Washing Program

Select the appropriate washing program based on the type of
laundry and desired settings.

6.5 Washing Programmes

Choose from a variety of washing programs available to suit
different fabric types and cleaning requirements.

6.6 Temperature Selection

Select the desired temperature for the wash cycle based on
fabric and stain type.

6.7 Spin Speed Selection

Adjust the spin speed according to the fabric type and desired
moisture level after the wash cycle.

6.8 Drying Programmes

Select the appropriate drying program based on the type of
laundry and desired drying settings.

6.9 Washing and Drying Programmes

Choose a combined washing and drying program for convenience and
time-saving.

6.10 Programme and Consumption Table

Refer to the program and consumption table provided in the user
manual for detailed information on each program’s duration and
resource usage.

6.11 Auxiliary Function Selection

Select auxiliary functions to enhance the washing or drying
process, such as pre-wash, extra rinse, or delay start.

6.11.1 Auxiliary Functions

Familiarize yourself with the available auxiliary functions and
their purposes before selecting them.

6.11.2 Functions/Programmes Selection

Select the desired auxiliary functions or programs based on your
specific requirements.

7. Maintenance and Cleaning

7.1 Cleaning the Detergent Drawer

Regularly clean the detergent drawer to prevent buildup and
ensure proper detergent dispensing.

7.2 Cleaning the Loading Door and the Drum

Clean the loading door and drum periodically to remove any
residue or lint.

7.3 Cleaning the Body and Control Panel

Wipe the body and control panel with a damp cloth to keep them
clean and free from dust.

7.4 Cleaning the Water Intake Filters

Clean the water intake filters regularly to prevent clogging and
ensure proper water flow.

7.5 Draining Remaining Water

Drain any remaining water from the washer-dryer after use to
prevent stagnant water and odors.

FAQ (Frequently Asked Questions)

Q: How do I choose the right washing program?

A: Refer to the user manual for detailed descriptions of each
washing program and select the one that best suits your laundry’s
needs.

Q: Can I use bleach in the washer-dryer?

A: Check the user manual for instructions on using bleach, as
some models may have specific requirements or limitations.

Q: How often should I clean the detergent drawer?

A: It is recommended to clean the detergent drawer regularly,
approximately once a month,

Washer-Dryer
User Manual
B5DT510446W
2820530910/ EN/ / 03/04/2023 10:43

Table of Contents

1 Safety Instructions…………………… 5

1.1 Intended Use……………………………. 5

1.2 Safety of Children, Vulnerable

Persons and Pets ……………………..

1.3 Electrical Safety……………………….. 6

1.4 Handling Safety ……………………….. 7

1.5 Installation Safety…………………….. 7

1.6 Operational Safety……………………. 8

1.7 Drying Safety……………………………. 10

1.8 Maintenance and Cleaning Safety 12

2 Important Instructions for Envir- 13 onment …………………………………….

2.1 Compliance with WEEE Directive . 13 2.2 Package Information………………… 13 3 Technical Specifications ………….. 14

4 Installation ………………………………. 15

4.1 Appropriate Installation Location. 15 4.2 Assembly of Bottom Panel Cov- 15
ers…………………………………………… 4.3 Removing Transportation Safety 16
Bolts ……………………………………….. 4.4 Connecting to Water Supply ……… 16 4.5 Connecting the Drain Hose to the 17
Drain ……………………………………….. 4.6 Adjusting the Stands ………………… 18 4.7 Electrical Connection ……………….. 18 4.8 Handling the Product ……………….. 18
5 Preliminary Preparation …………… 19

5.1 Sorting the Laundry ………………….. 19 5.2 Preparing Laundry for Washing…. 19 5.3 Tips for Energy and Water Saving 19 5.4 Start Up …………………………………… 19 5.5 Loading the Laundry…………………. 20 5.6 Correct Load Capacity ……………… 20 5.7 Using Detergent and Softener …… 21 5.7.1 Automatic Dosing …………………. 21 5.7.2 Dosage Selections, Cancella- 23
tion or Use of Powder Detergent ……………………………………… 5.7.3 Detergent and/or Softener Run- 23 ning Out ……………………………….. 5.7.4 Filling Detergent or Softener 23 into the Wrong Compartment … 5.8 Tips for Efficient Washing ………… 24

5.9 Tips for Efficient Drying…………….. 25 5.10 Displayed Programme Duration…. 25
6 Operating the Product ……………… 26
6.1 Control Panel……………………………. 26 6.2 Symbols on the Display …………….. 27 6.3 Preparing the Machine ……………… 27 6.4 Selection of Washing Program ….. 28 6.5 Washing Programmes………………. 28 6.6 Temperature Selection ……………… 30 6.7 Spin Speed Selection………………… 30 6.8 Drying Programmes………………….. 31 6.9 Washing and Drying Programmes 32 6.10 Programme and Consumption 33
Table ……………………………………….. 6.11 Auxiliary Function Selection………. 36 6.11.1 Auxiliary Functions………………… 37 6.11.2 Functions/Programmes Selec- 37
ted by Pressing the Function Keys for 3 Seconds ……………….. 6.12 Drying Steps …………………………….. 39 6.13 End Time …………………………………. 39 6.14 Starting the Programme……………. 40 6.15 Loading Door Lock……………………. 40 6.16 Changing the Selections After 41 Programme has Started ……………. 6.17 Cancelling the Programme ……….. 42 6.18 End of Programme……………………. 42 6.19 Standby Mode ………………………….. 42 6.20 HomeWhiz Feature and Remote 43 Control Function ………………………. 6.20.1 HomeWhiz Setup…………………… 43 6.20.2 Setting up a Washing Machine 45 Connected to Someone Else’s Account………………………………… 6.20.3 Remote Control Function and 45 Using It …………………………………. 6.20.4 Troubleshooting ……………………. 46
7 Maintenance and Cleaning……….. 46
7.1 Cleaning the Detergent Drawer ….. 46 7.2 Cleaning the Loading Door and 48
the Drum………………………………….. 7.3 Cleaning the Body and Control 48
Panel ……………………………………….. 7.4 Cleaning the Water Intake Filters.. 48 7.5 Draining Remaining Water and 48
Cleaning the Pump Filter ……………
8 Troubleshooting ………………………. 49

EN / 2

9 DISCLAIMER / WARNING ………… 54 EN / 3

Please read this user manual first!
Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product. Follow all warnings and information in the user manual. Thus, you protect yourself and your product against possible dangers. Keep the user manual. If you hand over the product to someone else, provide the user manual as well. Warranty terms, usage and troubleshooting methods of your product are in user guide. Symbols and Definitions The following symbols are used in the user guide:
Danger that could result in death or injury. Important information or useful hints about usage. Read the user manual. Recyclable materials.
Hot surface warning. WARNING Danger that may result in property damage to the product or its environment.
EN / 4

1 Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage.
Our company shall not be held responsible for damages that may occur if these instructions are not observed. · Installation and repair opera-
tions shall always be performed by Authorised Service. · Use original spare parts and accessories only. · Do not repair or replace any component of the product unless it is clearly specified in the operation manual. · Do not modify the product.

· The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
· This appliance is intended to be used in household and similar applications. For example;
Personnel kitchens of stores, offices and other work environments;
Ranches,
By customers of hotels, motels and other accommodation facilities
Bed and breakfasts, hostellike environments
Common areas of apartment blocks or laundries.

1.1 Intended Use
· The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.
· This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.
· Use only for washing and drying textile products that are marked accordingly.

1.2 Safety of Children, Vulnerable Persons and Pets
· This product may be used by children aged 8 years and older and persons with underdeveloped physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a the product safe way and the hazards involved.
· Children under the age of 3

should be kept away unless

continuously supervised.

EN / 5

· Electrical products are dangerous for children and pets. Children or pets should not play with, climb on top or inside the product. Check inside the product before use.
· Use child lock to prevent children from intervening with the product.
· Do not forget to close the loading door when leaving the room where the product is located. Children and pets may get locked inside and drown.
· Children should not perform cleaning and user maintenance works without an adult’s supervision.
· Keep the packaging materials away from children. Risk of injury and suffocation.
· Keep all detergents and additives used for the product away from children’s reach.
· Cut the power cable and break and deactivate the locking mechanism of the loading door before disposing of the product for children’s safety.
1.3 Electrical Safety
· Product should be unplugged during installation, maintenance, cleaning and repair procedures.

· Damaged power cables should be replaced by the authorised service in order to prevent possible danger.
· The product should not be fed via an external switching device such as a timer or connected to a circuit that is regularly switched on and off by a device.
· Do not tuck the power cord under the product or to the rear of the product. Do not put heavy items on the power cord. Do not over bend, crush and touch the power cable to sources of heat.
· Do not use an extension cord, multi-plug or adaptor to operate your product.
· The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
· Do not touch the plug with wet hands.
· When unplugging the appliance, don’t hold the power cord, but the plug.
· Make sure the plug is not wet, dirty or dusty.

EN / 6

1.4 Handling Safety
· Unplug the product before moving, remove the water outlet and water main connections. Drain any water left inside the product.
· This product is heavy, do not handle it by yourself. Do not hold extruding parts such as the laundry loading door to lift and move the product. The upper tray should be tightly fixed for moving.
· Your product is heavy; it should be carried carefully by two people if a staircase is involved. It may cause injuries if your product falls on you. Do not hit and drop the product while carrying.
· Carry the product in an upright position.
· Make sure that the hoses as well as the power cable are not folded, pinched or crushed after the product is fitted into its place after installation or cleaning procedures.
1.5 Installation Safety
· Check the information on the manual and installation instructions to prepare the product for installation and make sure the electrical mains, clean water mains and water

outlet are suitable. If not, call a qualified electrician and plumber to have them make the necessary arrangements. These operations are the responsibility of the customer. · Check for any damage on the product before installing it. Do not have the product installed if it is damaged. · Injuries may occur if hands are put into uncovered slots. Close the holes of the transportation safety bolts with plastic plugs. · Do not install or leave the product at locations where it may be exposed to external environment conditions. · Do not install the product at locations where the temperature drops below 0 ºC. · Do not place the product on a carpet or similar surface. It would create fire hazard since it cannot receive air from underneath. · Place the product on a level and hard surface and balance with the adjustable legs. · Connect the product to a grounding plug protected by a fuse suitable to the current values on the type label. Make sure the grounding is carried out by an expert electrician. Do

EN / 7

not use the product without suitable grounding to local/national regulations. · Plug the product in a socket with voltage and frequency values suitable to those indicated on the type label. · Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact. · Use the new hose set provided with the product. Do not re-use old hose sets. Do not make additions to the hoses. · Connect the water inlet hose directly to the water tap. The pressure from the tap should be minimum 0.1 MPa (1 bar) and maximum 1MPa (10 bars). 10 to 80 litres of water should be running from the tap in a minute in order for the product to function properly. If the water pressure is above 1 MPa (10 Bars), a pressure- reducing valve should be fitted. The maximum allowed temperature is 25°C. · Fit the end of the water discharge hose to the dirty water discharge drain, the sink or the bathtub.

· Place the power cable and houses in locations without risk of tripping.
· Do not install the product behind a door, a sliding door or at another location that will prevent the door from opening completely.
· If a drier is to be placed on the product, fix with a suitable connection apparatus obtained from the authorised service.
· There is a risk of contact with electrical pieces when the upper trays is removed. Do not dismantle the upper tray of the product.
· Place the product at least 1 cm away from the edges of furniture.
· Make sure the room in which the installation performed is adequately ventilated, as there may be a risk of undesirable gases coming out of the device igniting other fuels in the room or interacting with an open flame.
1.6 Operational Safety
· When you are using the appliances, use only detergents, softeners and supplements suitable for washing machines.

EN / 8

· Do not use chemical solvents on the product. These materials contain an explosion risk.
· Do not operate defective or damaged products. Unplug the product (or turn off the fuse it is connected to), turn off the water tap and call an authorised service.
· Do not place sources of ignition (burning candle, cigarettes, etc.) or sources of heat (irons, furnaces, ovens, etc.) on top of or near the product. Do not put inflammable/explosive materials near the product.
· Do not get on the product. · Unplug the product and turn
off the tap if you will not be using the product for long periods. · Detergent/maintenance materials may splash out of the detergent drawer if it is opened while the machine is working Contact of the detergent with your skin and eyes is dangerous. · Make sure pets do not climb inside the product. Check inside the product before use. · Do not force open the locked loading door. The door will open once the washing is completed. If the door does not open, use the solutions for

“loading door does not open” error in the Troubleshooting section. · Do not wash elements contaminated with gasoline, kerosene, benzene, reducers, alcohol or other inflammable or explosive materials and industrial chemicals. · Do not directly use dry cleaning detergent and do not wash, rinse, spin or dry laundry contaminated with dry cleaning detergent. · Do not place your hands into the rotating drum. Wait until the drum no longer rotates. · Do not place your hand or a metal object under the washing machine. · If washing laundry at high temperatures, the discharged washing water would burn your skin if in contact with your skin, for ex. when the draining hose is connected to the tap. Do not touch the discharge water. · Take the following precautions to prevent formation of biofilm and malodours:
Make sure the room where the washing machine is placed is well ventilated.

EN / 9

Wipe the door gasket and loading door glass with a dry and clean cloth at the end of the programme.
· The glass of the loading door will heat up when washing or drying at high temperatures. Therefore, do not allow especially children to touch the loading door glass while washing or drying.
1.7 Drying Safety
· Laundry that has been previously washed, cleaned, contaminated or stained with gasoline/gas, dry cleaning solvents or other inflammable/ explosive materials should not be dried in the machine because they give off inflammable or explosive vapours. Otherwise, fire hazard arises.
· Laundry contaminated with materials such as vegetable or mineral oil, acetone, alcohol, gasoline, gas oil, stain removers, naphtha, turpentine, paraffin or paraffin removers should be washed separately in hot water by adding extra detergent before being dried in the washing machine with dryer. Otherwise, fire hazard arises.

· Do not dry textile products that contain predominantly foam, rubber or rubber-like parts (e.g. shower caps, waterproof textile products, rubber products and clothes) or the ones that are filled and damaged (e.g. Pillows or coats). There is a risk of burns.
· If you use a laundry ball, detergent scale, laundry cage or ball in your machine, these products may melt during drying. If you are going to choose the drying feature, do not use these products. Otherwise, fire hazard arises.
· If you use industrial chemicals for cleaning, do not use the drying function. Otherwise, fire hazard arises.
· The door becomes very hot after drying process. After drying is over, open the door of the device completely. Do not touch the metal door located inside of the door glass. There is a risk of burns due to high temperatures.
· During Drying programmes, a cooling step is performed as the last step to ensure that the laundry remains at a temperature where it will not be damaged. You may be exposed to

EN / 10

hot steam if you open the cover without completing the cooling step. Risk of seething. · If the drying programmes are interrupted (as a result of programme cancellation or power failure), the laundry in the machine may be hot. Be careful. · Do not stop the machine before the drying programme is completed. If you have to stop the machine, take out all the laundry inside of it and place them in a suitable place and wait for them to cool. · Your product is suitable to operate between the temperatures of 0°C and +35°C. · Ambient temperatures between 15°C and +25°C are ideal for your product. · Do not overload the machine for drying. Observe the specified maximum load levels for drying. · If the laundry has been washed with a stain remover, run an additional rinsing speed before starting the drying speed. · Do not dry leather laundry and laundry containing leather (such as leather tags on jeans) in the machine. The colour left by the leather parts may smear on other textiles.

· If there is a problem that you cannot solve using the information given in the safety instructions section, turn off and unplug the machine and call an Authorized Service.
· In your washer-dryer, you can only wash laundry, only dry laundry or do both of these processes. The machine should not be used for a long period of time only for drying wet laundry. While the machine is only used for drying, it should be run empty in a short washing programme every 15 starts.
· Before putting laundry in the machine, check all of them and make sure that there is no object such as lighter, coin, metal object and pin, etc. in their pockets or inside of them.
· Lingerie that has metal parts should not be dried in the machine. Metal parts may come off during drying and cause damage to the machine. Put them in a bag or pillow case.
· Do not dry large laundry such as tulle curtains, curtains, sheets/beddings, blankets, rugs in the machine. Laundry may get damaged.
· Do not dry unwashed laundry in the machine.

EN / 11

· Do not use softener or antistatic agent unless recommended by the manufacturer.
· Products such as softener should be used in accordance with the manufacturer’s instructions.
· Do not dry silk, wool and similar delicate clothes in the machine. Otherwise, wool clothes can shrink and damage may be caused in other delicate clothes.
· Check the symbols on laundry label before washing and drying processes.
· The machine automatically cleans the lint itself that comes out of the laundry during drying. The machine performs automatic water intakes for cleaning. For this reason, the water tap of the machine should also be open during drying programmes.
· Prevent the lint from accumulating around the product.

1.8 Maintenance and Cleaning Safety
· Do not wash the product with pressure washers, by spraying vapour, water or pouring water.
· Do not use sharp or abrasive tools to clean the product. Do not use household cleaners, soap, detergent, gas, gasoline, thinner, alcohol, varnish, etc. while cleaning.
· Cleaning agents containing solvents might reek poisonous fumes( for ex. cleaning solvent. Do not use cleaning products containing solvents.
· There may be detergent residues in the detergent drawer when you open it for cleaning.
· Do not dismantle the filter of the discharge pump while the product is running.
· The temperature in the machine may rise up to 90ºC. Clean the filter after the water in the machine cools down in order to avoid risk of getting burnt.

EN / 12

2 Important Instructions for Environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive. 2.2 Package Information Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
EN / 13

3 Technical Specifications
Supplier’s name or commercial brand
Model name
Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet Electrical connection (V/Hz) Total current (A) Total power (W) Main model code

Beko B5DT510446W
7178588400 10 6
1400 No 84 60 60 + / 230 V / 50Hz 10 2200 1721
The model information as stored in the product database can be reached by entering following website and searching for your model identifier (*) found on energy label. https://eprel.ec.europa.eu/

The consumption values apply when wireless network connection is turned off.

EN / 14

4 Installation

Please read the “Safety Instructions” section first!
Your washing machine automatically detects the amount of laundry placed inside when selecting a program. While installing the product, before the first use, calibration should be done to ensure that the laundry amount is detected in the most accurate way. To do this, select the Drum Cleaning program and cancel the spin function. Start the program without laundry. Wait for the program to finish, which will take about 15 minutes. The program name may vary depending on the model. For the appropriate program selection, review the program descriptions section.
· Please contact the nearest Authorised Service for the installation of the appliance.
· Make sure that the installation and electrical connections of the product are performed by authorised service agent. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorised persons.
· Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer’s responsibility.
· Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
· Prior to installation, visually check if the product has any defects on it. Do not have the product installed if it is damaged. Damaged products cause risks for your safety.

4.1 Appropriate Installation Location · Place the product on a hard and level
floor. Do not place it onto a carpet with high pile or other similar surfaces. Placing on an improper floor shall cause noise and vibration problems. · Do not place the product on the power cable. · Do not install the product at places where temperature may fall below 0 ºC. Freezing might damage your product. · Leave a minimum space of 1 cm between the product and the furniture. · If you will install the product on a surface with steps, never place it close to the edge. · Do not place the product on any platform. · There shall not be any locked, sliding or hinged doors that may prevent the loading door from opening completely in the installation location of this product. · Do not place heat sources such as cooker, irons, ovens, heater etc. on the appliance and do not use them on the product.
4.2 Assembly of Bottom Panel Covers · In order to increase the sound comfort of
the product, attach cover A after removing the package foam. Cover A
Tilt the machine back slightly. Rest the tabs of Cover A against the lower panel. Complete the assembly by rotating the cover. · Cover B and the Cap are optional. If avail-
able, attach cover B and the Cap.

EN / 15

Cover B
Rest the tabs of Cover B against the lower panel. Complete the assembly by rotating the cover. Cap

WARNING Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly fixed in place.
4.4 Connecting to Water Supply

Insert the cap by pushing it with your finger. 4.3 Removing Transportation Safety
Bolts 1. Loosen all transportation safety bolts
with an appropriate wrench until they turn freely. 2. Bend the inner part by pressing it at the grip areas and pull the part out. 3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.
WARNING Remove the transportation safety bolts before operating the product. Otherwise, the product will get damaged.

WARNING The water pressure required for the operation of the product is between 1-10 bars (0.1-1 MPa). To ensure a smooth operation of the machine, 10 – 80 liters of water shall be supplied in a minute from a fully opened tap. If the water pressure is higher, install a pressure reducing valve.
WARNING Models with a single water inlet shall not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on a new product. It may cause water leakage from your machine and stain your laundry.
1. Connect the special hose supplied with the product to the water inlet on the product.

EN / 16

WARNING Make sure that the cold water connection is performed correctly during the installation of the product. Otherwise, your laundry may come out as hot at the end of the washing cycle and thus they may be worn.
2. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leak occurs, turn off the tap and remove the nut. Check the gasket and tighten the nut carefully again. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.
4.5 Connecting the Drain Hose to the Drain
1. Attach the end of the drain hose directly to waste water drain, washbasin or bathtub.
Your house will be flooded if the water draining hose is dislocated during water draining. There is also a risk of burning due to the high washing temperatures. In order to prevent such situations and make sure that the product performs water intake and drain processes without any problem, fix the drain hose securely.

2. Connect the hose to a minimum height of 40 cm and a maximum height of 90 cm.
3. If the hose is placed on the floor (or at a maximum height of 40 cm from the floor) and then its height is increased, discharging of water becomes difficult, and laundry may come out very wet from the machine. Thus, follow the heights provided in the figure.
4. To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.
5. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water discharge issues may emerge.
6. If the length of the hose is too short, use it by adding an original extension hose. The overall length of the hose shall not be longer than 3.2 m. To prevent water leaks, always secure the connection between the extension hose and the draining hose of the product with a suitable clamp so that it does not come off and cause leaks.

EN / 17

4.6 Adjusting the Stands
WARNING In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Ensure that the product is balanced by adjusting the feet. Otherwise, the product may move from its place and cause crushing, noise and vibration problems.
1. Loosen the nuts on the feet in the direction of the arrow with the tool in the user manual bag.
2. Adjust the feet until the product stands level and balanced. You can move the feet up by turning them counter-clockwise and down by turning them clockwise.
3. Re-tighten all lock nuts with the tool in the direction of the arrow. You can move the nuts down by turning them counter-clockwise and up by turning them clockwise.

· Power cable plug must be within easy reach after installation.
· If the current supply to the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 amp supply.
· The voltage specified in the “Technical specifications” section must be equal to your mains voltage.
· Do not make connections via extension cables or multi-plugs. Overheating and burning may occur due to the connecting cable.
Damaged power cables should be replaced by the authorised service in order to prevent possible danger.
4.8 Handling the Product
1. Unplug the product before handling it.
2. Disconnect the water outlet and water main connections. 3 Drain all the water that remains in the product. See Draining Remaining Water and Cleaning the Pump Filter
3. Install the shipping bolts in reverse order of the disassembly procedure. See Removing the Shipping Bolts

4.7 Electrical Connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations. · Connection must comply with national
regulations. · The electrical connection cable infra-
structure of the product must be adequate and suitable for product requirements. It is recommended to use a Ground Fault Circuit Breaker (GFCI).

Never carry the product without the shipping bolts properly attached! Your product is so heavy that it shall not be carried by one person. Your product shall be carried by two people and more care shall be taken on the stairs as it is a heavy product. If the product falls on you, it may cause injury. The packaging materials are dangerous for children. Keep packaging materials at a safe place away from the reach of children.

EN / 18

5 Preliminary Preparation

Please read the “Safety Instructions” section first
5.1 Sorting the Laundry
· Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
· Always observe the instructions given on the garment care labels.
5.2 Preparing Laundry for Washing
· Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. Remove the metal pieces or wash such clothes by putting them in a laundry bag or pillow case.
· Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.
· Put small size clothes such as infant’s socks and nylon stockings in a laundry bag or pillow case.
· Place curtains in without compressing them. Remove curtain attachment items. Curtain attachment items may cause pulling and tearing on the curtain.
· Fasten zippers, sew loose buttons and mend rips and tears.
· Wash “Machine washable” or “Hand washable” labelled products only with an appropriate programme. Dry these types of clothes by hanging them or laying them flat. Do not dry them in the machine.
· Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.
· Only use paints / colour changing agents and descalers suitable for use in machines. Always observe the instructions on the packaging
· Tough stains must be treated properly before washing. If you are not sure, check with a dry cleaner.

· Wash trousers and delicate laundry turned inside out.
· Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the product. Such dusts and powders on the laundry may build up on the inner parts of the product in time and can cause damage.
· Before washing laundry made of angora wool, keep them in the freezer section of the refrigerator for few hours. This will reduce pilling
5.3 Tips for Energy and Water Saving
Following information will help you use the product in an ecological and energy/waterefficient manner. · Operate the product in the highest load
capacity allowed for the programme you have selected, but do not overload. See “Programme and consumption table” · Observe the temperature instructions on the detergent packaging. · Wash slightly soiled laundry at low temperatures. · Use faster programmes for small quantities of lightly soiled laundry. · Do not use prewash and high temperatures for laundry that is not heavily soiled or stained. · If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process. · Do not use more detergent than the recommended on the detergent packaging.
5.4 Start Up
Before starting to use the product make sure that the preparations described in section “Environmental Instructions” and “Installation”. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this programme is not available in your product, ap-

EN / 19

ply the method which is described in section “Cleaning the loading door and the drum”.
Use an anti-limescale product suitable for the washing machines Some water has remained in the product due to the quality control processes in the production. It is not harmful for the product.
5.5 Loading the Laundry
1. Open the loading door. 2. Put the laundry items into the product in
a loose manner. 3. Push the loading door to close until you
hear a locking sound. Ensure that no items are caught in the door. The loading door is locked while a programme is running. The door lock will open a few minutes after the washing programme has ended. Then you can open the loading door. If the door does not open, apply the solutions provided for “Loading door cannot be opened” error in the Troubleshooting section.
5.6 Correct Load Capacity The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. The product automatically adjusts the water amount according to the weight of the laundry put inside it.

Follow the instructions in “Programme and consumption table”. When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying performance, do not put more laundry in the machine than specified.
Bathrobe: 1200 g Bedding: 700 g Sheet: 500 g Pillow Case: 200 g Table Cloth: 250 g Negligee/Pyjamas: 200 g Lingerie: 100 g Shirts: 200 g Blouse: 100 g Towel: 200 g
The loading door is locked while a programme is running. The door lock will open once the programme is completed. If the inner part of the machine is very hot at the end of the program, the loading door will not open until the temperature drops. If the door does not open, apply the solutions provided for “Loading Door Cannot Be Opened” error in the Troubleshooting section.
WARNING If the laundry is placed incorrectly, noise and vibration problems may occur in the machine.

EN / 20

5.7 Using Detergent and Softener
WARNING Read the manufacturer instructions on the package while using detergents, softeners, starch, bleach and decolourants, anti-limescale and follow the dosage information provided. Use a measuring cup, if any. Gel-like, non-fluid liquid detergents, etc. cannot be used in the detergent compartments or dosing chambers. Detergent, Softener and Other Cleaning Agents
The detergent drawer comprises of three compartments: (1) Liquid detergent compartment (2) Powder detergent compartment (3) Softener compartment · Add detergent and softener before start-
ing the washing programme. · Do not leave the detergent drawer open
when the washing programme is on. · Do not select a programme with pre-
washing if you are using a detergent pod or dispensing ball. Place the detergent pod or the dispensing ball directly among the laundry in the product. · Prewash compartment and prewash option is not available. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and colour. · Use different detergents for coloured and white laundry.

· Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes and at suggested programmes.
· When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.
· Wash woollens at suggested programme with special detergent made specifically for woollens.
· Please review the programme descriptions part for suggested programme for different textiles.
· All recommendations about detergents are valid for selectable temperature range of programmes.
Only detergents, softeners and additives suitable for washing machines should be used. Do not use liquid detergents or other cleaning agents to soften the laundry. Do not use soap powder.
5.7.1 Automatic Dosing
Initial Installation Turn on the machine with On/Off button.
Dosage symbol ( ) appears in programs where detergent dosing is allowed. If the liquid detergent or softener compartments are empty, the dosage symbol will flash in programs where detergent dosing is allowed.
Filling Liquid Detergent and Softener
1. Open the detergent compartment by pulling it towards yourself.

EN / 21

2. To fill liquid detergent (left) and softener (right), open the related tank’s lid by pulling it upwards as shown in the picture.

We recommend filling the detergent compartment with liquid detergents that can be used in common for coloured and white laundry.
If the detergent symbol is flashing even though the detergent compartments are filled, the detergent drawer is not seated properly. Push the drawer so that it is fully seated.

3. Remember not to exceed the “Max” sign when adding liquid detergent or softener.
4. Close the lid of the compartment.
5. Close the detergent drawer by pushing lightly.
6. After closing the detergent drawer, the
flashing dosage symbol ( ) starts lighting up continuously.
7. It indicates that the compartments are filled successfully and the detergent drawer is in its place.

WARNING When the detergent drawer is filled with detergent and/or softener; do not pull or move the equipment, and do not tilt it on either side or back. Before conducting these operations, the detergent drawer must always be removed from the machine. If you wish to start the program while there is no detergent in the detergent drawer, liquid detergent dosage must be cancelled and washing with powder detergent is required. Only liquid detergent must be put inside the liquid detergent dosing tank and only softener must be put in the softener dosing tank. Putting all kinds of liquid and powder chemicals together inside the tanks may damage your laundry or your machine.

EN / 22

5.7.2 Dosage Selections, Cancellation or Use of Powder Detergent
Liquid detergent cannot be selected in some of the programmes. Powder detergent must be used in these cases. For more information, see Programme Table. If powder detergent is to be used in programmes where the detergent dosing system is operating, desired amount of detergent is put into the powder detergent compartment. If the detergent compartment in the middle is to be used, the liquid detergent dosage selection must be deactivated. Machine measures the load and determines the right amount of detergent depending on the load amount and the selections made previously. The detergent taken is not visible while washing, it is taken directly with water over the laundry. If another liquid detergent with different properties than the one in the liquid detergent dosing tank is preferred to be used, liquid detergent with said different properties should be put in the powder detergent compartment in the middle and the liquid detergent dosage selection should be deactivated. Softener will be taken from the dosing system.

Liquid detergent and softener dosing symbols on the screen become active or inactive according to the program selected.
First position on the display means liquid detergent is active, softener is on. If the liquid detergent and softener symbol is lit, it means that liquid detergent and softener dosing is active.
If the liquid detergent and softener symbols are active on the screen; when you press the Automatic Dosing key for the first time, the liquid detergent will turn on and the softener will turn off. If the softener symbol is not lit, it means that softener will not be used in the rinsing step.
When you press the Automatic Dosing key for the second time, the powder detergent and the softener will turn on. If the liquid detergent symbol is not lit, it means that it can be washed with powder detergent.
When you press the Automatic Dosing key for the third time, the powder detergent will turn on and the softener will turn off. When you press it for the fourth time, it will return to the first position.
5.7.3 Detergent and/or Softener Running Out
When the detergent or the softener put inside the detergent drawer finishes, the dosage symbol in the display flashes. When this symbol flashes, it is necessary to add the decreasing detergent or softener to the dosing tank. The product will be able to dose enough for 2-3 more cycles from the first moment the symbol flashes.
5.7.4 Filling Detergent or Softener into the Wrong Compartment
In case you fill the detergent or the softener in the wrong compartment, see “Cleaning the Detergent Drawer”.

EN / 23

5.8 Tips for Efficient Washing

Soiling Level

Clothes
Light Colours and Whites

Colours

Black/Dark Col- Delicates/ Wool-

ours

lens/Silks

(Recommended temperat- (Recommended temper-

ure range based on soil ature range based on

level: 40-90 °C)

soil level: cool -40 °C)

(Recommended temperature range based on soil level: cool -40 °C)

(Recommended temperature range based on soil level: cool -30 °C)

It may be necessary to Powder and liquid deter-

pre-treat the stains or per- gents recommended for

form prewash.

colours can be used at

Powder and liquid deter-

gents recommended for Heavily Soiled whites can be used at

(difficult stains such as grass, coffee, fruits and blood.)

dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains

dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for heavily soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

which do not contain de-

and the stains that are colourant should be

sensitive to bleaches.

used.

Normally Soiled

Powder and liquid detergents recommended for

(For example, whites can be used at stains caused dosages recommended by body on col- for normally soiled lars and cuffs) clothes.

Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Detergents which do not contain decolourant should be used.

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for moderately soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

Lightly Soiled

Powder and liquid detergents recommended for

(No visible stains exist.)

whites can be used at dosages recommended for lightly soiled clothes.

Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain decolourant should be used.

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for lightly soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

EN / 24

5.9 Tips for Efficient Drying

Types of Clothing

Programmes

Cotton Dry

Synthetic Dry

Babyprotect+

Washing and Drying

Wash & Wear

Durable Clothes Containing Cotton

Sheets, beddings, baby clothes, tshirts, sweatshirts, durable Not Recomknitted clothes, mended! jeans, canvas pants, shirts, cotton socks etc.

It washes and It washes and Clothes such

dries consecut- dries consecut- as shirts, t-

ively! Sheets, ively! Sheets, shirts, sweat-

beddings, baby beddings, baby shirts etc. that

clothes, t-

have been

shirts, sweat- shirts, sweat- worn for a

shirts, durable shirts, durable short time and

knitted clothes, knitted clothes, are unstained

jeans, canvas jeans, canvas A very small

pants, shirts, pants, shirts, amount of

cotton socks cotton socks laundry should

etc.

be loaded.

Synthetic Clothes (Polyester, nylon etc.)

Not Recommended!

It is recommended for clothes containing polyester, nylon, polyacetate, acrylic. Drying is not recommended for clothes containing viscose. Attention should be paid to the drying instructions on the maintenance label.

It is recommended for clothes containing polyester, nylon, polyacetate and acrylic at low temperatures, taking into account the washing and drying warnings indicated on the maintenance label.

Lightly soiled and unstained shirts, t-shirts and synthetic laundry. A very small amount of laundry should be loaded.

Delicate (Con-

taining Silk,

Woolen,

Not Recom-

Cashmere, An- mended!

gora wool etc.)

Laundry

Not Recommended!

Not Recom-

mended! It is

not suitable to

Bulky laundry such as blankets, coats, curtains etc.

dry bulky laundry in the washing machine. Dry these laundry

by hanging

them or laying

them flat.

Not Recommended! It is not suitable to dry bulky laundry in the washing machine. Dry these laundry by hanging them or laying them flat.

5.10 Displayed Programme Duration
You can view the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure

and programme settings, the programme duration is automatically adjusted while the programme is running.
SPECIAL CASE: At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load. It is the most common use case. After programme starts, in 20-25 minutes actual load is de-

EN / 25

tected by the machine. And if the detected load is higher than half load; washing programme will be adjusted accordingly and
6 Operating the Product
Please read the “Safety Instructions” section first!
6.1 Control Panel

programme duration increased automatically. You can follow this change on the display.

12 11 10 9 8 7 6 5

1 Programme Selection Button 3 Spin Level Indicator Lights 5 Start/Pause Button 7 End Time Setting Button 9 Auxiliary Function Button 2 11 Spin Speed Adjustment Button

2 Temperature Level Lights 4 Display 6 Remote Control Button 8 Drying Level Adjustment Button 10 Auxiliary Function Button 1 12 Temperature Setting Button

EN / 26

6.2 Symbols on the Display

6 7
8

17 16 15 14 13 12 11 10 9

1 Temperature Indicator 3 Duration information 5 Programme follow-up indicator 7 Add Garment Indicator 9 Remote Control Indicator 11 Drying Level Indicator 13 Auxiliary Function Indicators 2 15 No spin indicator 17 Cold Water indicator

2 Spin Speed Indicator 4 Door lock is engaged symbol 6 No Water indicator 8 Bluetooth Connection Indicator 10 Delayed Start Enabled Indicator 12 Child Lock Enabled symbol 14 Auxiliary Function Indicators 1 16 Rinse Hold Indicator

6.3 Preparing the Machine

The visuals used for machine description in this section are schematic and may not match exactly with the features of your machine.

1. Check if the hoses are connected tightly.
2. Plug in your machine. 3. Turn on the tap completely. 4. Place the laundry inside the machine. 5. Put detergent and softener.

EN / 27

6.4 Selection of Washing Program
1. Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with “Programme and consumption table”.
Programmes are limited to the highest spin speed appropriate for that particular type of fabric. When selecting a programme, always consider the type of fabric, colour, soiling level and permissible water temperature.
2. Select the desired programme with the Programme Selection knob.

Symbols shown on the display are schematic and may not match with the product one-to-one. If you do not want to perform drying process after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light turns off. When washing and drying using the Drying function of your machine, load a maximum of 6 kilograms of laundry into the machine. If you load more laundry than the capacity of the machine, your laundry will not dry and the machine will run longer and consume more energy.

6.5 Washing Programmes
Use the following main programmes depending on the type of fabric.
After selecting the appropriate washing program, by pressing the Drying button before starting the program, you can set your machine to switch to the drying step (automatically or timedly) at the end of the washing program, without any pauses/interruptions. Each time you press the button, the step in which the drying process will take place is shown in the row of information and the related symbol lights up. You can see when the programme will finish on the display of the machine, according to the drying selections you will add to the washing programmes. If you want, by keeping pressing the button you can dry for the maximum time allowed.
You can take a glance at the programmes for which you can select the drying function in the Programme and Consumption tables.

WARNING The drying function cannot be selected for the washing programme for woollen clothes.
· Eco 40-60
In the Eco 40-60 programme, you may wash normally soiled cotton laundry that are specified to be washed together at 40°C or 60°C. This programme is the standard test programme according to the EU environmentally friendly design and energy labelling regulations.
Although this programme washes longer than other washing programmes, it is more efficient in terms of energy and water consumption. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this way, energy and water consumption would be much less.
In order to evaluate compliance with EU environmentally friendly design and energy labelling regulations, the washing and drying cycle should be run by selecting the cupboard dry function of eco 40-60 programme. The washing and drying cycle can clean normally soiled laundry declared to

EN / 28

be washable at 40 °C or 60 °C in a single cycle and dries them so that they can be put in a cupboard immediately.
· Katoen
You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When the quick wash function button is pressed, programme duration becomes notably shorter but effective washing performance is ensured with intense washing movements. If the quick wash function is not selected, effective washing and rinsing performance is ensured for your heavily soiled laundry.
· Synthetisch
You can wash your laundry (such as shirts, blouses, synthetic/cotton blended fabrics etc.) in this programme. When the quick wash function button is pressed, the programme duration will be shortened significantly and effective washing performance is provided for your laundry that is not very dirty. If the quick wash function is not selected, effective washing and rinsing performance is ensured for your heavily soiled laundry.
· Wol
Use to wash your woollen/delicate laundry. Select the appropriate temperature complying with the tag of your clothes. Your laundry will be washed with a very gentle washing action in order not to damage the clothes.
· Centrifugeren + Pompen
You can use this program to remove the water on the garment/inside the machine.
· Spoelen
Use when you want to rinse or starch separately.
· Hemden
This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. Steam is applied at the end of the programme to help the wrinkle reducing function. The special spin profile and steam applied at the end of the programme

reduce the wrinkles on your shirts. When the quick wash function is selected, the Pre-treatment algorithm is executed. · Apply the pre-treatment chemical on your
garments directly or add it together with the detergent in the powder detergent compartment. Thus, you can obtain the same performance as you obtain with normal washing in a much shorter period of time. Usage life of your shirts increases. Do not use pre-wash detergent if you are planning to use delay function of your machine. Prewash detergent may pour out on your clothes and cause stains.
** It is recommended to operate the cycle with no more than 6 shirts to minimize wrinkles in your shirts using this cycle. When washing more than 6 shirts, there may be differences on the wrinkle levels and humidity on shirts at the end of cycle.
· Xpress / Super Xpress
Use this programme to wash your lightly soiled or unspotted cotton clothes in a short time but not for towels or heavy cottons. The programme duration can be reduced down to 14 minutes when the quick wash function is selected. When the quick wash function is selected, maximum 2 (two) kg of laundry must be washed.
· Dark Care / Jeans
Use this programme to protect the colour of your dark-coloured garments or jeans. It performs high performance washing with special drum movement even if the temperature is low. It is recommended to use liquid detergent or woollen shampoo for dark coloured laundry. Do not wash your delicate clothes containing wool or etc.
· Mix
Use to wash your cotton and synthetic clothes together without sorting them.
· Lingerie
You can use this programme to wash delicate garments that are suitable for hand wash and delicate women’s underwear. Small amount of garments must be

EN / 29

washed in a washing net. Hooks, buttons etc. must be done up and zips must be zipped up. · Sports
You can use this programme to wash sports and outdoors garments that contain cotton/synthetics mix and water repellent covers such as gore-tex etc. It makes sure your garments are washed gently thanks to special rotating movements. · Downloaded Program
This is a special programme that allows you to download different programmes when you want to. At the start, there is a programme you can see with the HomeWhiz application as default. However, you can use the HomeWhiz application to select a programme from the predetermined programme set, and then change and use it.
If you want to use HomeWhiz feature and Remote Control function, you must select Downloaded Programme. Detailed information can be found in HomeWhiz Feature and Remote Control Function.
· Towel
Use this programme to wash durable cotton laundry such as towels. Load the towels into the machine paying attention to place them in a way that they will not contact the door gasket or the glass.
6.6 Temperature Selection

temperature value is not the maximum temperature that can be selected for the current programme. Press the Temperature Adjustment button to change the temperature. Temperature decreases gradually.
Temperature Adjustment button only works backwards. For example, if you want to select 60°C while 40°C is written on the display, you need to press the button several times until you reach 60°C, going backwards from 40°C. If you go to Cold Wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme will be displayed. Press the Temperature Adjustment button again to decrease the temperature.
Finally, the Cold light that indicates cold washing illuminates on the display. You can also change the temperature after the washing starts. You can also change the desired temperature after the washing programme starts. However, you need to do this before the heating phase starts.
6.7 Spin Speed Selection

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator. It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.

EN / 30

Then, depending on the model of the
product, “Rinse Hold ” and “No Spin ” options appear on the display.
Spin Speed Adjustment button only works backwards. For example, if you want to select 1000 rpm while 800 rpm (cycle/min) is written on the display, you need to press the button several times until you reach 1000 rpm, going backwards from 800 rpm.
If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent your laundry from getting wrinkled when there is no water in the machine.
This function holds the laundry in the final rinsing water. If you want to spin your laundry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start/Pause button. The programme will resume. Machine drains the water and spins the laundry.
If you want to drain the water at the end of the programme without spinning, use No Spin function.
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it.
Auxiliary function selection for drying:

When you select a new washing program, press the Auxiliary Function Selection button to set the drying option suitable for this program.
In programmes that do not allow the drying setting, when the Drying auxiliary function button is pressed, the drying light will not change and a warning noise will be heard. For only drying programmes, set the appropriate drying option by pressing the Auxiliary Function Selection button.
6.8 Drying Programmes
WARNING The machine automatically cleans the lint that from the laundry during drying programme. The machine uses water during drying. For this reason, the water tap of the machine should also be open during drying programmes. When you select a new washing program, press the Auxiliary Function Selection button to set the drying option suitable for this program.
In drying programmes, there is a spinning step. Your machine performs this process in order to shorten the drying duration. When the drying programme is selected, the spin speed setting is in the range of Maximum spin speed. In programmes that do not allow the drying setting, when the Drying auxiliary function button is pressed, the drying light will not change and a warning noise will be heard. For only drying programmes, set the appropriate drying option by pressing the Auxiliary Function Selection button.

In case of water outage, washing and drying cannot be performed.

EN / 31

· Synthetisch Kastdroog Use this programme to dry synthetic laundry with a dry weight of up to 4 kilograms. You can only dry in this programme.
For the dry weight of the laundry, see Correct Load Capacity
· Katoen Kastdroog Use this programme to dry cotton laundry with a dry weight of up to 6 kilograms. You can only dry in this programme.
When you will dry laundry consisting of towels and bathrobes only, load a maximum of 4,5 kilograms of laundry. For the dry weight of the laundry, see Correct Load Capacity
6.9 Washing and Drying Programmes
· Was & Droog 6+6 kg Use this programme to dry up to 6 kg of cotton laundry right after the washing programme, without making any other selections.
External Drying auxiliary function cannot be selected while this programme is selected.
In the 6 kg Washing and 6 kg Drying programme, it is recommended to fill the machine to the level shown in the figure above for ideal drying conditions (you can see the level arrow when you open the loading door).

· Was & Droog Express Use this programme to wash 0.5 kg of laundry (2 shirts) in 40 minutes or to wash 1 kg of laundry (5 shirts) in 60 minutes.
Clean and Wear programme is designed to quickly wash and dry daily clothes that have been worn for a short time and are not heavily contaminated. This programme is suitable for fine-textured and quickdrying laundry (shirts, t-shirts). For thick textured laundry that takes longer to dry, other drying options or programmes should be used.
· Was & Droog BabyProtect+ A steam step applied at the beginning of the program helps to soften the dirt. Use this programme to wash and quickly dry laundry weighing up to 2 kilograms, requiring anti-allergic and hygienic washing (cotton laundry such as baby clothes, sheets, lingerie).
The Baby+ programme has been tested and approved by the “British Allergy Foundation” (Allergy UK) located in the United Kingdom.
· HygieneTherapy Hygienic washing with hot air (programme duration 58 min.)
The hygienic ventilation programme ensures that the temperature of the laundry is kept at relatively high temperatures with a precise heating method and hygienic cleaning is performed via air. Use this programme for fast hygienic cleaning of your cotton or synthetic dry clothes with hot air.

EN / 32

Hygienic Ventilation programme does not use water. Use this programme for clothes you want to clean by ventilation. WARNING: Do not put chemicals such as detergents, bleach, stain remover, etc. in the detergent drawer in the hygienic ventilation programme. No pre-treatment to laundry is required before turning on the programme.

Refreshing with hot air (48 min. and 38 min.)
The default duration is 58 minutes if you select the “Hygienic Ventilation” programme. With “Quick+” auxiliary function you can select different programme durations such as 48 minutes and 38 minutes.

6.10 Programme and Consumption Table For washing:

Auxiliary Functions

Temperature °C Max. Load (kg) Water Consump-
tion (l) Energy Consump-
tion (kWh) Max. Speed Fast+ Anti-Crease+ Automatic Dosage Drying

Programme

Temperature °C

Katoen
Eco 40-60
Eco 40-60 + Cupboard Dry
Synthetisch Xpress / Super Xpress Xpress / Super Xpress + Fast+ Wol Hemden Drum Cleaning+ Mix Sports

90 10 98 2,75 1400 · · · ·

60 10 98 2,00 1400 · · · ·

40 10 95 1,10 1400 · · · ·

40 ***

10 69,5 1,000 1400

··

40 ***

5 56,0 0,770 1400

··

40 ***

2,5 39,0 0,410

1400

··

40 ***

6 74,5 3,695 1400

··

40 ***

3 46,5 2,095 1400

··

60 4 76 1,60 1200 · · · ·

40 4 74 1,10 1200 · · · ·

90 10 75 2,30 1400 · · · ·

60 10 75 1,30 1400 · · · ·

30 10 75 0,25 1400 · · · ·

30 2 45 0,15 1400 · · · ·

40 2 60 0,60 1200

60 4 70 1,40 800 · · · ·

–

80 2,60

600

Downloaded Program *****

40 4 83 1,10 800 · · · ·

40 5 60 0,65 1200

··

EN / 33

Cold – 90 Cold – 90 Cold – 90
40-60
40-60
40-60
40-60
40-60 Cold – 60 Cold – 60 Cold – 90 Cold – 90 Cold – 90 Cold – 90 Cold – 40 Cold – 60
90
Cold – 40 Cold – 40

Dark Care / Jeans

40 5 86 1,05

Towel

40 4 115 1,60

Lingerie

30 1 78 0,30

· : Selectable.

: Automatically selected, cannot be cancelled.

*** : Eco 40-60 programme is a test programme according to 40 ° C temperature selection, EU regulation EU / 2019/2014 and EN 60456: 2016 / A11: 2020 standard.

Selection of 40 °C temperature and cupboard dry in the Eco 40-60 programme is a washing and drying cycle test programme as per EU/2019/2014 EU regulation and EN 62512.

***** : These programmes can be used with the HomeWhiz application. Energy consumption may increase due to connection.

– : See the programme description for maximum load.

1200 · · · ·

Cold – 40

800

Cold – 60

600

Cold – 30

Please read Installation section of the user manual before first use. The auxiliary functions in the table may vary according to the model of your machine. Water and energy consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, spin speed, and changes in electric voltage. Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or the existing ones can be removed. The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine. The amount of noise and humidity varies according to the spin speed; when the higher spin speed is selected during the spinning phase, the laundry contains less moisture at the end of the programme but higher noise occurs.

EN / 34

You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts. Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that wash at low temperatures for a long time.
For drying:

Auxiliary Functions Drying Level

Max. Load (kg) Water Consumption (l) Energy Consumption (kWh) Max. Speed Fast+ Automatic Dosage Anti-Crease+ Drying Extra Dry Cupboard Dry Iron Dry Time Based Drying – minute

Programme

°C

Temperature Selection °C

Katoen Kastdroog

–

Synthetisch Kastdroog –

Was & Droog BabyProtect+

Was & Droog 6+6 kg

Was & Droog Express 30

HygieneTherapy

–

50 3,90 1400

35 2,50

–

·*··· ·

–

·*

·· ·

–

120 3,80 1400

· · * · · · · 90-30

115 6,00 1400

· · * · · · · 60-Cold

0,5 35 0,60 1200

··*

· 30-Cold

44 1,00 1200

··*

· 30-Cold

0,50

–

·*

–

Consumption Values (EN)

Temperature Selection °C

Spin Speed Capacity (cycle/min) (kg)

1400

Eco 40-60

1400

2,5

Katoen

1400

Katoen

1400

Synthetisch

1200

Programme Duration (h:min)

Energy Consumption (kWh/ cycle)