Nedis KAHB400CAL Stainless Steel Hand Blender User Manual

: June 5, 2024
: nedis

KAHB400CAL Stainless Steel Hand Blender

Nedis KAHB400CAL Stainless Steel Hand Blender

User Manual

Preface

Thank you for purchasing the Nedis KAHB400CAL.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis KAHB400CAL is a hand blender.

With the different accessories and speeds, this product can easily blend and mix soups, sauces and smoothies.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.

The product is intended for indoor use only.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Stainless Steel Hand Blender

---|---

Article number

|

KAHB400CAL

Input voltage

|

200 – 240 VAC ; 50 / 60 Hz

Power

|

800 W

Cable length

|

1.1 m

Revolutions per minute (RPM)

|

15000 – 16000 RPM

Main parts (image A)

A

1. Speed control (0-5)

2. Power switch

3. Turbo button

4. Motor unit

5. Blender

6. Cup

7. Whisk

8. Chopper lid

9. Chopping blades

10. Chopper bowl

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not immerse the motor unit in water or any other liquid. Only clean the motor unit with a damp cloth.
Do not use the chopping blade without the chopper bowl.
Do not leave the product unattended when switched on.
Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
Be careful when handling the blades.
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
Disconnect the product from the power source before service and when replacing parts.
The use of accessories not recommended by the product manufacturer may result in fire, electric shock or injury to persons.
Unplug the product when not in use and before cleaning.
Place the product on a stable and flat surface.
Children may not use the product without supervision.

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Product in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions such as double insulation or reinforced insulation are provided, there being no provision for protective earthing or reliance upon installation conditions. NOTE A Class II products may be provided with means for maintaining the continuity of protective circuits, provided that such means are within the product and are insulated from accessible surfaces according to the requirements of Class II.

|

Indication to explain that the product can be recycled.

|

Indication to explain that the product should be recycled appropriately.

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Before first use

Before using the product for the first time, thoroughly clean all parts that come in contact with food.

1. Remove all packaging.

2. Clean all parts that come in contact with food before use.

Use

Using the product
Disconnect the product from the power source before service and when replacing parts.
Be careful when you pour hot liquid into the bowl or cup as it can be ejected out of the product due to a sudden steaming.
Using the blender A 5
The blender accessory is intended to be used for blending fluids, mixing soft ingredients or mashing cooked ingredients.

1. Put the ingredients in the cup A 6.

Do not overfill, fill to maximum 50% to prevent overflowing.
To prevent skin burns the ingredients must not be hotter than 80 °C.

2. Align the pins of A 5 to the notches in A 4.

3. Push A 5 onto A 4.

4. Twist A 5 clockwise to lock it in place.

5. Connect the product to a power outlet.

6. Immerse the blade in the ingredients.

7. Use the speed control (0-5) A 1 to set the speed.

The speed also can be adjusted while the product is switched on.

8. Press and hold the power switch A 2 to switch on the product.

9. Move the product up and down in circles to blend the ingredients.

Release the power switch after 30 seconds of continuous use. Use the product max. 5 times in a row. After 5 consecutive uses, allow the product to cool down to room temperature to avoid overheating.

Using the whisk A 7

Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.

1. Put the ingredients in a plastic or metal bowl.

2. Align the pins of A 7 to the notches in A 4.

3. Push A 7 onto A 4.

4. Twist A 7 clockwise to lock it in place.

5. Connect the product to a power outlet.

6. Use the speed control (0-5) A 1 to set the speed.

The speed also can be adjusted while the product is switched on.

7. Press and hold the power switch A 2 to switch on the product.

Release the power switch after 2 minutes of continuous use. After 2 minutes of continuous use, allow the product to cool down to room temperature to avoid overheating.

Using the chopper A 89q

Be careful when handling the blades.
Cut large foods into smaller pieces before processing.

1. Put the chopping blade A 9 into the chopper bowl A10.

2. Put the ingredients into A10.

3. Put the chopper lid A 8 onto A10.

4. Align the pins of A 8 to the notches in A 4.

5. Push A 8 onto A 4.

6. Twist A 8 clockwise to lock it in place.

7. Connect the product to a power outlet.

8. Use the speed control (0-5) A 1 to set the speed.

The speed also can be adjusted while the product is switched on.

9. Press and hold the power switch A 2 to switch on the product.

Release the power switch after 30 seconds of continuous use. Use the product max. 3 times in a row. After 3 consecutive uses, allow the product to cool down to room temperature to avoid overheating
When removing the processed food remove the blades before emptying the bowl.

Disassembling the product

Disconnect the product from the power source before service and when replacing parts.

Speed settings

The product works at different speeds that can be adjusted during the use of the product.

Speed settings

|

Intended use

---|---

1

|

To blend in flour/dry ingredients and liquids for butters and cookie dough; to stir nuts, chips raisins into heavy cookie dough like oatmeal and chocolate chip.

2

|

To mix thin butters such as muffins, waffles, pancakes and quick breads; to prepare sauces, puddings.

3

|

To cream butter and sugar; to beat eggs into butters and cookie dough; to prepare cake mixes specifying medium speed; to mix cake butters and frostings.

4

|

To beat whole eggs, frozen desserts; to mix light butters like popovers.

5

|

To whip cream, beat egg whites, mash potatoes and other vegetables like turnips and squash.

Press and hold the turbo button A 3 to temporarily set the speed to maximum (5).

Maintenance

Cleaning the product
Clean the product after every use.
Unplug the product when not in use and before cleaning.

|

Handwash

|

Dishwasher

|

Damp cloth

---|---|---|---

Motor unit

|

No

|

No

|

Blender

|

Yes

|

Yes

|

Cup

|

Yes

|

Yes

|

Whisk

|

Yes

|

Yes

|

Chopper lid

|

No

|

No

|

Yes

Chopping blades

|

Yes

|

Yes

|

Chopper bowl

|

Yes

|

Yes

|

Do not immerse the motor unit in water or any other liquid. Only clean the motor unit with a damp cloth.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---