FALCON RIDGE KU-RTV900-TC01 Kubota RTV900 Top Cap Instruction Manual
- June 3, 2024
- FALCON RIDGE
Table of Contents
KU-RTV900-TC01 Kubota RTV900 Top Cap
Instruction Manual
KU-RTV900-TC01 Kubota RTV900 Top Cap
Instructions for Installation and Care of Kubota RTV900 Top Cap KU-
RTV900-TC01
Notice: Do not smoke inside the cab or expose the enclosure to direct
flames. The cab is Flammable.
-
Be sure to read these instructions thoroughly before opening and installing the RTV900 Top Cap. The installation is best done when the temperature is 70 degrees F. or warmer.
The temperature affects the adhesive Velcro, if conditions prevent installing in warmer weather it helps to store the adhesive Velcro at room temp. Prior to installation. -
Carefully open the carton and remove the rolled Top Cap on a large flat surface that is clean and free of dirt.
-
Check over the parts included in the carton with the parts list shown below:
Velcro Hook strips:| 5 each| 6” long
---|---|---
Top Cap| 1 each| -
Place the Top Cap over the roll cage of the RTV900. Pull the corners down to determine the correct positions to place the 6” adhesive Velcro strips around the roll bars. The photos below show the correct way to attach the double-sided Velcro.
Cleaning and Storage Recommendations:
- Before removing the Falcon Ridge Cab for storage, make sure it is very clean in order to prevent scratching of the window panels. Clean with a soft rag or sponge using a mild liquid detergent soap and warm water solution. Never rub the windows with a dry cloth or rag! Let the Cab dry thoroughly before attempting to roll it for storage.
- It is important that the Cab be rolled up for storage rather than folding. Folding will cause damage to the windows!!! Carefully roll up the Cab similar to the way it was when it was packed at the factory On a large, clean and flat surface, fold the doors over the rear panel first, then, interleave the top and windshield on top of the doors. Begin rolling the Cab into a roll approximately 8 inches in diameter. Put the rolled Cab back into the carton for storage at normal room temperature. It is best not to expose the Cab to either extremely hot or cold temperatures when storing.
- A special cleaner conditioner is available from Falcon Ridge that will greatly increase the service life of the Cab Enclosure. In addition, if the additional hook and loop sets are needed, they can also be ordered.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>