Nedis RFWS10WT | RFWS20WT RF Smart On Wall Switch User Manual

: June 5, 2024
: nedis

RFWS10WT | RFWS20WT RF Smart On Wall Switch

Nedis RFWS10WT | RFWS20WT RF Smart On Wall Switch

User Manual

Preface

Thank you for purchasing the Nedis RFWS10WT I RFWS20WT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis RFWS10WT I RFWS20WT is a wireless on wall switch for Nedis RF Smart Products.

The product is exclusively intended for switching Nedis RF Smart products on or off.

The product is intended for indoor, domestic use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

RF Smart On Wall Switch

|

RF Smart On Wall Switch

---|---|---

Article number

|

RFWS10WT

|

RFWS20WT

Transmission channels

|

1

|

2

Max. radio transmit power

|

10 dBm

Frequency

|

433.92 MHz (±150k)

Range

|

30 m

Battery

|

12V – 23A Alkaline

Working temperature

|

-10 – 40 °C

Humidity

|

0 % – 80 %

Main parts (image A )

A

1. On button channel 1

2. Off button channel 1

3. On button channel 2

4. Off button channel 2

5. Switch cover

6. Frame

7. Battery

8. Base plate

Safety instructions

WARNING

Only use the product as described in this manual.
Read the manual carefully before use. Keep the manual for future reference.
Do not drop the product and avoid bumping.
Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not expose the product to water or moisture.
Do not use the product in damp places like patios and cellars or near flammable liquids such as solvents or paints.
For battery safety, consult the manual of the batteries.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Pairing to a Nedis RF Smart Product

Pair the Nedis RF Smart products before you install the product on a wall.

1. Hold the product close to a Nedis RF Smart product.

2. Activate the pairing mode on the Nedis RF Smart product (see the manual of the Nedis RF Smart product in question).

3. Press On button channel 1 A 1 to pair the Nedis RF Smart product to channel 1 of the product.

4. For , repeat step 1 to 3 for A 3 to pair a Nedis RF Smart product to channel 2.

A receiver can be paired to up to 5 different transmitters.
Do not pair two dimmable receivers or a dimmable and an on/off receiver to the same channel of a transmitter.

Installing the product

Keep a distance of at least 1 m between your Nedis RF Smart products.

1. Remove the switch cover A 5.

2. Remove the frame A 6.

3. Attach the base plate A 7 to a wall.

4. Place back A 6.

5. Place back A 5.

Replacing the battery (image B)

Make sure to match the (+) and (-) polarity markings.
Properly dispose of the empty battery.

B

Use

Using the product

When the Nedis RF Smart product is connected to channel 1, you can control the product with A 1 ** or A** 2.

For channel 1:

Press A 1 to switch on the connected Nedis RF Smart product.
Press A 2 to switch off the connected Nedis RF Smart product.

Controlling the light level of a dimmable lamp ****

Press A 1 to switch on the lamp.

2. Press A 1 again. The lamp will automatically decrease and increase in brightness.

3. Press A 1 to select the desired brightness.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not clean the inside of the device.
Do not use cleaning solvents or abrasives.
Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RFWS10WT I RFWS20WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

webshop.nedis.com/rfws10wt#support

webshop.nedis.com/rfws20wt#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands