BLAUPUNKT 5CN22 Fridge Freezer Instruction Manual

BLAUPUNKT 5CN22 Fridge Freezer

Product Information

Specifications

• Product: Fridge-freezer

Product Usage Instructions

Safety

General Information:
Ensure to follow the safety instructions provided in this manual to prevent any injuries or damages.

Intended Use:
This fridge-freezer is designed for household use only. Do not use it for any other purposes.

Restriction on User Group:
This product is intended for use by adults. Keep it out of reach of children.

Safe Transport:
When transporting the appliance, do not attempt to lift it on your own due to its heavy weight. Seek assistance to avoid injury.

Safe Installation:
WARNING: Risk of electric shock! Follow these guidelines for safe installation:

• Connect and operate the appliance according to the specifications on the rating plate.
• Connect the appliance to a properly installed socket with earthing.
• Ensure that the protective conductor system of the domestic electrical installation is properly installed.
• Do not use external switching devices such as timers or remote controls with the appliance.
• The mains plug of the power cord must be freely accessible after installation. If not possible, integrate an isolating switch into the permanent electrical installation.
• Check that the power cable is not trapped or damaged during installation.
• Avoid letting the power cord come into contact with heat sources.

Preventing Material Damage

Follow proper handling and usage instructions to prevent any material damage to the appliance.

Environmental Protection and Saving Energy

Disposing of Packaging:
Dispose of the packaging material according to local regulations.

Saving Energy:
To save energy, ensure the appliance is properly closed and minimize the time the door is kept open.

Installation and Connection

Scope of Delivery:
Check the contents of the package to ensure all necessary components are included.

Criteria for the Installation Location:
Choose an appropriate location for installation, following the criteria specified in the manual.

Installing the Appliance:
Follow the step-by-step instructions provided in the manual to install the appliance properly.

Preparing the Appliance for the First Time:
Before initial use, perform any necessary preparations as described in the manual.

Connecting the Appliance to the Electricity Supply:
Connect the appliance to a suitable power supply following the instructions provided in the manual.

Familiarizing Yourself with Additional Functions

Refer to the manual to learn about additional functions and features of the fridge-freezer.

FAQ (Frequently Asked Questions)

• Q: Can I use this fridge-freezer for commercial purposes?
  A: No, this fridge-freezer is designed for household use only.

• Q: How should I dispose of the packaging materials?
  A: Please follow local regulations for the proper disposal of packaging materials.

• Q: How can I save energy while using this appliance?
  A: To save energy, ensure the door is properly closed and minimize the time it is kept open.

• Q: Can I use external switching devices with this appliance?0
  A: No, do not use external switching devices like timers or remote controls with the appliance.

Register your new device on YourBlaupunkt: blaupunkteinbaugeraete.com

Safety

Observe the following safety instructions.

General information

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

Intended use
This appliance is only intended to be fitted under a counter.

Only use this appliance:

• For chilling food.
• in private households and in enclosed spaces in a domestic environment.
• Up to an altitude of 2000 m above sea level.

Restriction on user group

• This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
• Do not let children play with the appliance.
• Cleaning and user maintenance must not be performed by children unless they are being supervised.
• Children above the age of three years old and younger than eight years old may load and unload the fridge-freezer.

Safe transport

WARNING ‒ Risk of injury!

• The high weight of the appliance may result in injury when lifted.
• Do not lift the appliance on your own.

Safe installation
WARNING ‒ Risk of electric shock!

Incorrect installation is dangerous.

• Connect and operate the appliance only by the specifications on the rating plate.
• Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
• The protective conductor system of the domestic electrical installation must be properly installed.
• Never equip the appliance with an external switching device,e.g. a timer or remote control.
• When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an isolating switch must be integrated into the permanent electrical installation according to the installation regulations.
• When installing the appliance, check that the power cable is not trapped or damaged.
• If the insulation of the power cord is damaged, this is dangerous.
• Never let the power cord come into contact with heat sources.

WARNING ‒ Risk of explosion!
If the appliance’s ventilation openings are sealed, a leak in the refrigeration circuit may result in a flammable mixture of gas and air.

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.WARNING ‒ Risk of fire!
  It is dangerous to use an extended power cord and non-approved adapters.

• Do not use extension cables or multiple socket strips.

• Only use adapters and power cords approved by the manufacturer.

• If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted.

• Portable multiple socket strips or portable power supply units may overheat and cause a fire.

• Do not place portable multiple socket strips or power supply units on the back of the appliance.

Safe useWARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

• Only use the appliance in enclosed spaces.
• Never expose the appliance to intense heat or humidity.
• Do not use steam- or high-pressure cleaners to clean the appli-ance.

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

• Keep packaging material away from children.
• Do not let children play with packaging material.
• Children may breathe in or swallow small parts, causing them to suffocate.
• Keep small parts away from children.
• Do not let children play with small parts.

WARNING ‒ Risk of explosion!
If the cooling circuit is damaged, flammable refrigerant may escape and explode.

• To accelerate the defrosting process, do not use any other mechanical devices or means other than those recommendedby the manufacturer.

• If food is stuck to the freezer compartment, loosen it with a blunt implement such as the handle of a wooden spoon.
  Products that contain flammable propellants and explosive substances may explode, e.g. spray cans.

• Do not store products that contain flammable propellants (e.g.spray cans) or explosive substances in the appliance.

WARNING ‒ Risk of fire!
Electrical devices within the appliance may cause a fire, e.g. heaters or electric ice makers.

• Do not operate electrical devices within the appliance.WARNING ‒ Risk of injury!
  Injury to the eyes caused by escaping flammable refrigerant and hazardous gases.

• Do not damage the tubes of the refrigerant circuit or the insulation.CAUTION ‒ Risk of harm to health!
  To prevent food from being contaminated, you must observe the following instructions.

• If the door is open for an extended period, this may lead to a considerable temperature increase in the compartments ofthe appliance.

• Regularly clean the surfaces that may come into contact with food and accessible drain systems.

• Store raw meat and fish in suitable containers in the refrigerator so that they do not touch or drip on other food.

• If the fridge/freezer is empty for an extended period, switch off the appliance, defrost it, clean it and leave the door open to prevent the formation of mold.
  Metal or metal-style parts in the appliance may contain aluminum.If acidic food comes into contact with aluminum in the appliance, aluminum foil ions may pass into the food.

• Do not consume soiled food.

Damaged appliance
WARNING ‒ Risk of electric shock!

• If the appliance or the power cord is damaged, this is dangerous.

• Never operate a damaged appliance.

• Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.

• If the appliance or the power cord is damaged, immediately un-plug the power cord or switch off the fuse in the fuse box

• Call customer services. → Page 24
  Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.

• Only use genuine spare parts when repairing the appliance.

• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service

WARNING ‒ Risk of fire!
If the tubes are damaged, flammable refrigerant and harmful gases may escape and ignite.

• Keep naked flames and ignition sources away from the appliance.
• Ventilate the room.
• Switch off the appliance. → Page 15
• Unplug the mains plug from the mains or switch off the circuit breaker in the fuse box.
• Call customer service. → Page 24

Preventing material damage

ATTENTION!
Using the base, runners or appliance doors as a seat surface or climbing surface may damage the appliance.

• Do not stand or support yourself on the base, runners or doors.
  Contamination with oil or fat maycause plastic parts and door seals to become porous.

• Keep plastic parts and door seals free of oil and grease.
  Metal or metal-style parts in the appli-ance may contain aluminum. When aluminum comes into contact with acidic foods, it corrodes and discol-ours.

• Only store packaged food in theappliance.
  If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discolored.

• Never clean fittings and accessories the dishwasher.
  Environmental protection and saving energy

Environmental protection and saving energy

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

• Sort the individual components bytype and dispose of them separately.

Saving energy

• If you follow these instructions, your appliance will use less power.
• Selecting the installation location
• Keep the appliance out of direct sunlight.
• Install the appliance as far away aspossible from heating elements, cookers and other heat sources:
• Maintain a 30 mm clearance to electric or gas cookers.
• Maintain a 300 mm clearance tooil or solid-fuel cookers.
• Never cover or block the exterior ventilation grilles.

Saving energy during use
Note : The arrangement of the fittings does not affect the energy consumption of the appliance.

• Open the appliance only briefly and then close it carefully.
• Never cover or block the interior ventilation openings or the exterior ventilation grilles.
• Transport purchased food in acool bag and place in the appli-ance quickly.
• Allow warm food and drinks tocool down before storing them.
• Thaw frozen food in the refrigerator compartment to utilise the low temperature of the food.
• Always leave some space between the food and to the back panel.

Installation and connection

Scope of delivery

After unpacking all parts, check for any transport damage and for completeness of delivery.
If you have any complaints, contact your dealer or our after-sales service → Page 24.

The delivery consists of the following:

• Built-under appliance
• Equipment and accessories1
• Installation material
• Installation instructions
• User manual
• Customer service directory
• Warranty enclosure2
• Energy label
• Information on energy consumption and noises
• Information about Home Connect

Criteria for the installation location

WARNING
Risk of explosion!
If the appliance is in a space that is too small, a leak in the refrigeration circuit may result in a flammable mixture of gas and air.

• Only install the appliance in a space with a volume of at least 1 m3 per 8 g refrigerant. The volume of refrigerant is indicated on the rating plate. → “Appliance”, Fig. 1 / 3 , Page 13
  Climate class| Permitted room tem- perature
  ---|---
  SN| 10 °C to 32 °C
  N| 16 °C to 32 °C
  ST| 16 °C to 38 °C
  T| 16 °C to 43 °C
• The weight of the appliance ex works may be up to 40 kg depending on the model.
• The subfloor must be sufficiently stable to bear the weight of the appliance.

Permitted room temperature

• The permitted room temperature depends on the appliance’s climate class.
• The climate class can be found on the rating plate. → “Appliance”, Fig. 1 / 3 , Page 13

The appliance is fully functional within the permitted room temperature. If an appliance with climate class SN is operated at colder room temperatures, the appliance will not be damaged up to a room temperature of 5 °C.

Niche dimensions
Observe the niche dimensions if you install your appliance in the niche. If this is not the case, problems may occur when installing the appliance.

Niche depth

• Install the appliance in the recommended niche depth of 560 mm.
• If the niche depth is smaller, the energy consumption increases slightly.
• The niche depth must be a minimum 550 mm.

Niche width

• An inside niche width of at least 600 mm is required for the appliance.
• Over-and-under and side-by-side installation
• If you want to install 2 refrigerating appliances one over the other or side by side, you must maintain a clearance of at least 150 mm between the appliances. Selected appliances can be installed without a minimum clearance. Ask your dealer or kitchen planner about this

Installing the appliance

WARNING
Risk of electric shock!
Liquid in the control elements may be dangerous.

• Always install the enclosed niche cover in accordance with the enclosed installation instructions.
• Install the appliance in accordance with the enclosed installation instructions.

Preparing the appliance for the first time

1. Remove the informative material.
2. Remove the protective foil and transit bolts, e.g. remove the adhesive strips and carton.
3. Clean the appliance for the first time. → Page 19

Connecting the appliance to the electricity supply

1. Insert the non-heating appliance plug of the power cable into the appliance.

2. Insert the mains plug of the appliance’s power cable in a socket nearby.
   The connection data of the appliance can be found on the rating plate. → “Appliance”, Fig. 1 / 3 , Page 13

3. Check the mains plug is inserted properly.

4. The temperature display shows an animation and the control panel is locked.

5. The appliance is ready to use once the animation has ended and an LED lights up for the temperature display.

Familiarising yourself with your appliance

Appliance
You can find an overview of the parts of your appliance here.
Note : Deviations between your appliance and the diagrams may differ with regard to their features and size.

Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

app. You can find more information in the Home Connect app.
3|  sets the temperature of the refrigerator compartment.
4|  lights up when the alarm is switched on.
5| super lights up when Super cooling is switched on.
6| Displays the set temperature for the refrigerator compart- ment in °C.
7| 3 sec. switches the appli- ance on or off.
---|---

Features

FeaturesThe features of your appliance depend on the model.

Shelf
To vary the shelf as required, you can remove the shelf and re-insert it elsewhere. → “Removing the shelf”, Page 20

Door rack
To adjust the door rack as required, you can remove the door rack and re- insert elsewhere. → “Removing door rack”, Page 21

Accessories

Use original accessories. These have been made especially for your appliance.
The accessories for your appliance depend on the model.

Egg tray
Store eggs safely on the egg tray.

Bottle holder
The bottle holder prevents bottles from falling over when the appliance door is opened and closed.

Removing the bottle holder

1. Remove the door rack for large bottles. → Page 21
2. Loosen the bottle holder from the back wall of the door rack for large bottles on the left first and then on the right , then remove the bottle holder diagonally upwards

Ice cube tray

Use the ice cube tray to make ice cubes.

Making ice cubes
Use only drinking water to make ice cubes.

1. Fill the ice cube tray with drinking water up to ¾ and place in the freezer compartment. If the ice cube tray is stuck to the freezer compartment, loosen it with a blunt implement such as the handle of a wooden spoon.
2. To loosen the ice cubes, twist the ice cube tray slightly or hold it briefly under flowing water.

Basic operation

Switching on the appliance

1. Electrically connect the appliance. → Page 11
   Note : If the appliance has been previously switched off using the control panel, press and hold ⁠ 3 sec. for three seconds.

2. The temperature display shows an animation and the control panel is locked.

3. The appliance is ready to use once the animation has ended and an LED lights up for the temperature display.

4. The appliance begins to cool.

5. Set the required temperature. → Page 15

Operating tips

• Once you have switched on the\ appliance, the set temperature is only reached after several hours. Do not put any food in the appliance until the set temperature has been reached.
• When you close the door, a vacuum may be created. The door is then difficult to open again. Wait a moment until the vacuum is offset.
• The temperature in the appliance varies due to the following conditions:
  • How often the appliance is opened
  • Load capacity
  • Temperature of newly stored food
  • Ambient temperature
  • Direct sunlight

Switching off the appliance
Press and hold ⁠ 3 sec. for three seconds.

Setting the temperature

Setting the refrigerator compartment temperature
Press repeatedly until the temperature display shows the required temperature setting. The recommended temperature in the refrigerator compartment is 4 °C. → “”OK” sticker”, Page 18 Additional functions8 Additional functions

Additional functions

Find out which additional functions can be used for your appliance. Additional functions can be set via the Home Connect app.

Super cooling

With Super cooling, the refrigerator compartment cools as cold as possible.
Switch on Super cooling before placing large quantities of food.
Note: When Super cooling is switched on, increased noise may occur.

Switching on Super cooling
Press super repeatedly until super lights up.
Note: After approx. 6 hours, the appliance switches to normal operation.

Switching off Super cooling
Press super repeatedly until the temperature display shows the required temperature.

Sabbath mode

To ensure that you can also use the appliance on the Sabbath, the Sabbath mode switches off all non-essential functions.
During Sabbath mode, the following functions are switched off:

• Super cooling
• Alarm
• Interior lighting
• Audible signals
• Messages on the control panel
  Note: The brightness of the control panel lighting is reduced during the Sabbath mode.

Switching on Sabbath mode
Press and hold for 15 seconds until an audible signal sounds. a lights up.
Note: After approx. 80 hours, the appliance switches to normal mode.

Switching off Sabbath mode
Press and hold for 15 seconds until an audible signal sounds

Alarm

Door alarm

If the appliance door is open for a while, the door alarm switches on.
A warning tone sounds and lights up.
After 10 minutes, the interior lighting flashes.

Switching off the door alarm

• Close the appliance door or press.
  • The warning tone is switched off.

Home Connect

• Home ConnectThis appliance is network-capable. mmConnect your appliance to a mobile device to control its functions via the Home Connect app.
• The Home Connect services are not mavailable in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country.
• You can find information about this at: www.home-connect.com.
• To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi1) and to the Home Connect app.
• After switching on the appliance, wait at least 2 minutes until internal device initialisation is complete. Only then should you set up Home Connect.
• The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.

Tips

• Please consult the documents supplied by Home Connect.
• Please also follow the instructions in the Home Connect app.

Notes

• Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app. → “Safety”, Page 4
• Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.

Setting up the
Home Connect app

1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect.
   The Home Connect app guides you through the entire login process.

Setting up Home Connect Requirements

• The Home Connect app has been installed on your mobile device.
• The appliance is receiving signals from the WLAN home network (Wi- Fi) at its installation location.
  • Open the Home Connect app and scan the following QR code.
  • Follow the instructions in the Home Connect app.

Switching on the connection to the WLAN home network (Wi-Fi)
Press .

Switching off the connection to the WLAN home network (Wi-Fi)
Press .

Installing updates for the
Home Connect software
Note : If an update of the Home Connect software is available, a message appears in the Home Connect app.

• To install the update for the Home Connect software, follow the instructions in the Home Connect app.
• The control panel is partially locked during the installation.

Resetting Home Connect settings
If your appliance experiences connection problems with the WLAN home network (Wi-Fi) or your appliance wants to log into a different WLAN home network (Wi- Fi), you can reset the Home Connect settings.

• Press and hold for six seconds until goes out.
  • The Home Connect settings have been reset.

Data protection

Please see the information on data protection.
The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration):

• Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
• Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
• The current software and hardware version of your appliance.
• Status of any previous reset to factory settings.
  This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.

Note : Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.
Refrigerator compartment11 Refrigerator compartment Refrigerator compartmentYou can keep meat, sausage, fish, dairy products, eggs, prepared meals and pastries in the refrigerator compartment.
The temperature can be set from 2 °C to 6 °C.
The refrigerator compartment can also be used to store highly perishable foods in the short to medium term. The lower the selected temperature, the longer the food remains fresh.

Tips for storing food in the refrigerator compartment

• Only store food when fresh and undamaged.
• Store food covered or in air-tight packaging.
• To avoid impeding the circulation of air and to prevent food from freezing, do not place food so that it has direct contact with the back wall.
• Allow hot food and drinks to cool down first before placing in the appliance.
• Observe the best-before date or use-by date specified by the manufacturer.

Chill zones in the refrigerator compartment
The air circulation in the refrigerator compartment creates different chill zones.

Coldest zone
The coldest zone is between the arrow stamped on the side and the shelf underneath.
Tip : Smmtore highly perishable food such as fish, sausages and meat in the coldest zone.

Warmest zone
The warmest zone is at the very top of the door.
Tip: Store food that does not spoil easily in the warmest zone, e.g. hard cheese and butter. Cheese can then continue to release its aroma and the butter will still be easy to spread.

“OK” sticker

• The “OK” sticker lets you check whether the refrigerator compartment reaches the safe temperature ranges of +4 °C or colder recommended form food.
• The “OK” sticker is not included with all models.
• If the sticker does not indicate “OK”, gradually reduce the temperature. → “Setting the refrigerator compartment temperature”, Page 15
• Once the appliance is switched on, it may take up to 12 hours until the set temperature is reached.

Floor area

Floor areaYou can store the same type of food in the floor area as you can in the refrigerator compartment.
The temperature in the floor area matches the temperature in the rest of the refrigerator compartment. → Page 18

Storing food in the floor area
To store food in the floor area, slide the cover backward over the floor area.

Defrosting

Defrosting in the refrigerator compartment

• When the appliance is operating, condensation droplets or frost form on the rear panel of the refrigerator compartment due to functional reasons.
• The back panel in the refrigerator compartment defrosts automatically.
• Condensation runs through the condensation channel into the drainage hole to the evaporation pan and does not have to be wiped away.
• To ensure that the condensation can drain and odours do not form, observe the following information:
• Cleaning the condensation channel and drainage hole → Page 20.
• Cleaning and servicing14 Cleaning and servicing
• Cleaning and servicingTo keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
• Customer Service must clean inaccessible points. Cleaning by customer service can give rise to costs.

Preparing the appliance for cleaning

1. Switch off the appliance. → Page 15
2. Disconnect the appliance from the power supply. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
3. Take out all of the food and store it in a cool place. Place ice packs (if available) onto the food.
4. If there is a layer of hoarfrost, allow this to defrost.
5. Remove all fittings and accessories from the appliance. → Page 20

Cleaning the appliance

• Risk of electric shock!
• An ingress of moisture can cause an electric shock.
• Do not use steam- or high-pressure cleaners to clean the appliance.
• Liquid in the lighting or in the controls can be dangerous.
• The rinsing water must not drip into the lighting or controls.

ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

• Do not use hard scouring pads or cleaning sponges.
• Do not use harsh or abrasive detergents.
• Do not use cleaning products with a high alcohol content. If liquid gets into the drainage hole, the evaporation pan may overflow.
• The rinsing water must not get into the drainage hole.
• If you clean fittings and accessories in the dishwasher, this may cause them to become deformed or discolored.
• Never clean fittings and accessories in the dishwasher.
  • Prepare the appliance for cleaning. → Page 19
  • Clean the appliance, the fittings, the accessories and the door seals with a dishcloth, lukewarm water and a little pH-neutral washing-up liquid.
  • Dry thoroughly with a soft, dry cloth.
  • Insert the fittings.
  • Electrically connect the appliance. → Page 11
  • Putting the food into the appliance.

Cleaning the condensation channel and drainage hole
Regularly clean the condensation channel and drainage hole to ensure that the condensation can drain.

1. Remove the shelf over the floor\ area. → Page 20
2. Carefully clean the condensation channel and the drainage hole, e.g. using a cotton bud.

Removing the fittings
If you want to clean the fittings thoroughly, remove these from your appliance.

Removing the shelf
Lift the shelf at the front , pull it out and remove it ⁠.

Removing door rack
Lift the door rack and remove it.

Removing appliance components
If you want to clean your appliance thoroughly, you can remove certain components from your appliance.

Removing the cover over the floor area

1. Remove the door rack for large bottles. → Page 21
2. Pull out the cover as far as it will go over the floor area, lift it over the end stop, and swivel it downwards and out

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING
Risk of electric shock!
Improper repairs are dangerous.

• Repairs to the appliance should only be carried out by trained specialist staff.
• Only use genuine spare parts when repairing the appliance.
• If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.

mode is switched on.

▶ Carry out the appliance self-test.

Once the appliance self-test has ended, the appliance switches to normal operation.

The LED lighting does not work.| Different causes are possible.

▶ Call customer service.

The customer service number can be found in the enclosed customer service directory.

Home Connect is not working properly.| Different causes are possible.

▶ Go to www.home-connect.com.

The warning tone sounds.

The door alarm is switched on.

| The appliance door is open.

▶ Close the appliance door.

The temperature differs greatly from the setting.| Different causes are possible.

1. Switch off the appliance. → Page 15

2. Switch the appliance back on after five minutes.

→ Page 15

‒ If the temperature is too warm, check the temperature again after a couple of hours.

‒ If the temperature is too cold, check the temperature again on the following day.

The base of the refrigerator compartment is wet.| The condensation channel or drainage hole are blocked.

▶ Clean the condensation channel and the drainage hole. → Page 20

is running, e.g. refrigerating unit, fan. Refrigerant flows through the pipes. The motor, switches or solenoid valves are switching on or off. No action required.
The appliance makes noises.| Fittings wobble or stick.

▶ Check the removable fittings and, if required, re- place these.

Bottles or containers are touching.

▶ Move the bottles or containers away from each other.

Storage and disposal

Taking the appliance out of operation

1. Switch off the appliance. → Page 15

2. Disconnect the appliance from the power supply.
   Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.

3. Remove all of the food.

4. Defrost the appliance. → Page 19

5. Clean the appliance. → Page 19

6. To guarantee the ventilation inside the appliance, leave the appliance open.

Disposing of old appliance
Valuable raw materials can be reused by recycling.

WARNING
Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.

• Leave shelves and containers inside the appliance to prevent children from climbing in.
• Keep children away from the redundant appliance.

WARNING
Risk of fire!
If the tubes are damaged, flammable refrigerant and harmful gases may escape and ignite.

• Do not damage the tubes of the refrigerant circuit or the insulation.
  • Unplug the appliance from the mains.
• Cut through the power cord.
• Dispose of the appliance in an environmentally friendly manner.
  Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled by European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Customer ServiceFunction-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

Note : Under the terms of the manufacturer’s warranty applicable to the location, the use of Customer Service is free of charge. The minimum duration of the warranty (manufacturer’s warranty for private consumers) in the European Economic Area is 2 years according to the terms of warranty applicable to the location. The terms of warranty do not affect other rights or claims held by yourself under local legislation Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.
If you contact Customer Service, you will require the product number (ENr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance.
The contact details for Customer Service can be found in the enclosed
Customer Service directory or on our website.

Product number (E-Nr.), production number (FD), and consecutive numbering (Z-Nr.)

• You can find the product number (ENr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance’s rating plate. → “Appliance”, Fig. 1 / 3 , Page 13
• Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Technical data

• Technical Refrigerant, cubic capacity, and further technical specifications can be found on the rating plate. → “Appliance”, Fig. 1 / 3 , Page 13
• This product contains a light source from energy efficiency class F. The light source is available as a spare part and should only be replaced by trained specialist staff.
• You can find more information about your model online at https://eprel.ec.europa.eu/1. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the characters before the slash in the product number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label

Information regarding Free and Open Source Software

• This product includes software components that are licensed by the copyright holders as free or open-source software.

• The applicable license information is stored on your home appliance. You can also access the applicable license information via your Home Connect app: “Profile -> Legal information -> Licence Information”.2

• You can download the license information on the brand product website.
  (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.

• The source code will be made available to you upon request.

• Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany Subject: „OSSREQUEST“

• The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance

Declaration of Conformity

Declaration of ConformityHK Appliances GmbH hereby declares that the appliance conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at www .blaupunkt-einbaugeraete.com among the additional documents on the product page for your appliance Hereby, HK Appliances GmbH declares that the appliance complies with relevant statutory requirements.1 2.4 GHz band (2400–2483.5 MHz): Max. 100 mW 5-GHz band (5150–5350 MHz + 5470–5725 MHz): max. 150 mW

www.blaupunkt-einbaugeraete.com

Deutschland/Germany
service.DE@blaupunkt-einbaugeraete.com
Österreich/Austria
service.AT@blaupunkt-einbaugeraete.com
Niederlande/Netherlands
service.NL@blaupunkt-einbaugeraete.com
Belgien/Belgium
service.BE@blaupunkt-einbaugeraete.com
Schweden/Sweden
service.SE@blaupunkt-einbaugeraete.com
Frankreich/France
service.FR@blaupunkt-einbaugeraete.com
Luxemburg/Luxembourg
service.LU@blaupunkt-einbaugeraete.com
Schweiz/Switzerland
service.CH@blaupunkt-einbaugeraete.com
Italien/Italy
service.IT@blaupunkt-einbaugeraete.com
Spanien/Spain
service.ES@blaupunkt-einbaugeraete.com
Großbritannien/Great Britain
service.GB@blaupunkt-einbaugeraete.com
Malta/Malta
service.MT@blaupunkt-einbaugeraete.com

Australien/Australia Indien/India
CustomerCare@blaupunktAU.com

References

• www
• Blaupunkt Einbaugeräte: Blaupunkt
• Connect your household | Home Connect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>