AstroAI TMTMPWH Tire Tread Depth Gauge User Manual
- June 4, 2024
- AstroAI
Table of Contents
Tire Tread Depth
Gauge User Manual 
Model: TATMPWH
-V1.1 –
This manual contains important information regarding the safety, operation,
maintenance, and storage of this product. Before using, read and understand
all cautions, warnings, instructions, and product labels. Failure to do so
could result in possible injury or property damage.
Thank you for purchasing AstroAl Tire Tread Depth Gauge. This is a Digital
Tire Tread Depth Gauge for clear and easy reading.
We hope you enjoy your new Tire Tread Depth Gauge! Questions or concerns?
Please contact us via support@astroai.com.
Thanks again!
Please fully read and understand this manual before using this product and keep this manual for future reference.
WARNING
- Please read and follow the instructions carefully before use.
- The product is designed for measuring tire tread depth only.
- Please keep the product away from fire, corrosive liquids, and magnetic material.
DIAGRAM
| 1. Depth bar tip | 2. Base |
|---|---|
| 3. Inch/MM unit button | 4. LCD screen |
| 5. Depth bar6 | 6. ON/OFF button |
| 7. Zero button | 8. Battery compartment |
SIZE DESCRIPTION
Size: 116x60x15mm
INSTRUCTIONS
I . MEASUREMENT METHOD
- Power on: Press the ‘On’ button to start the tire tread depth gauge.
- Zero: Place the Base on the horizontal surface; push the Depth bar to the end; press the ‘ZERO’ button (press the Zero button before every usage).
- Choose units: the tire tread depth gauge is equipped with Inch/MM two units; please choose the desired unit before measuring.
- Measurement: Place the Base to the tire surface horizontally, insert the Depth bar tip into the groove bottom then push the Depth bar to measure the depth. (Place the Base to the tire surface horizontally, to avoid measurement errors. Do not push the Depth bar too harshly in case of causing damage.)
- Reading: Record the reading from the screen.
- Power off and storage: Press the ‘OFF’ button to power off the tire tread depth gauge and keep it properly stored.
BATTERY EXCHANGE
- Make sure the product is turned off.
- Push along the cover to change the battery.
- Use CR2032 3V battery, and check if the battery is installed properly.
- Make sure the battery cover is installed properly.
MAINTENANCE
- Please remove the battery when not in use for a long time.
- Please use a wet cloth or mild cleanser to clean the appearance of the tire tread depth gauge.
- The product should be stored in a dry place.
- Please push along the cover to change the battery, or the battery will be exposed and the cover will further be damaged.
- Please keep the product away from fire, corrosive liquids, and magnetic material.
SPECIFICATIONS
- Product: Tire Tread Depth Gauge
- LCD Screen size: 35x17mm (1.38*0.67in)
- Size Description(LengthxWidthx Height): 116x60x15mm (4.57×2,36×0,59in)
- Resolution: 0.01mm(0.001in)
- Accuracy: +0.1mm(+0.004in)
- Material: ABS Plastic
- Battery: CR2032 3V
- Measurement Range: 0-25.4mm (0-1in)
PACKAGE INCLUDED
- 1xTire Tread Depth Gauge
- 1xUser manual
RECYCLING
- You may dispose of the product when its service life has ended, please recycle the recyclable parts according to local guidelines.
WARRANTY PERIOD
1 – Year Warranty Limited From Astro.
Each AstroAl Tire Tread Depth Gauge will be free from defects in material and
workmanship. This warranty does not cover damage from neglect, misuse,
contamination, alteration, accident, or abnormal conditions of operation or
handling. This warranty covers the original purchaser only and is not
transferable.
Astro always wants to provide our customers with excellent products as well as
customer service. To know more about us, please visit
astroai.com
Web:www.astroai.com
an E-mail:support@astroai.com