Nedis KAMF300ESS Milk Frother User Manual

Nedis KAMF300ESS Milk Frother

User Manual

Preface

 Thank you for purchasing the Nedis KAMF300ESS.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis KAMF300ESS is a milk frother for creating perfect milk foam in 90 seconds. The product can also only heat up your milk.

The product is intended for indoor use only.

The product is not intended for professional use.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Milk Frother

---|---

Article number

|

KAMF300ESS

Power input

|

220 – 240 V ~ 50 – 60 Hz

Rated power

|

450 – 550 W

Heating capacity

|

300 ml

Frothing capacity

|

150 ml

Minimum capacity

|

75 ml

Main parts (image A)

A

1. Spout

2. Jug

3. Power base

4. Lid

5. MAX  indicator (heating milk)

6. MAX  indicator (frothing milk)

7. Handle

8. Power indicator LED

9. Heating button

10. Frothing button

11. Power cable

12. Whisk

13. Mixer

Safety instructions

  WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this document.
• Retain the original product literature for future reference.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Unplug the product from the power source and other equipment if problems occur.
• Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
• Never immerse the product in water or place it in a dishwasher.
• Do not let the power cable hang over the edge of a table or counter.
• Do not place the product near gas, an electric burner or a heated oven.
• Do not leave the product unattended when switched on.
• Do not move the product during operation.
• Do not touch any hot surfaces.
• Always fill the product between the MIN  and  MAX  indicators.
• Do not fill the product with other liquids than milk.
• Do not put hands and foreign objects inside the product during operation.
• Only power the product with the voltage corresponding to the markings on the product.
• Plug into a grounded outlet only.
• Do not use a timer or a separate remote-control system that switches on the product automatically.
• Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
• Unplug the product from the power outlet and allow it to cool down before cleaning and maintenance.
• Unplug the product from the power outlet and other equipment if problems occur.
• The heat of the product may cause damage to the surface the product is placed on. Always place the product on a flat, stable and heat resistant surface to prevent damage to the surroundings of the product.
• Be careful when opening the lid, hot steam may escape.
• Keep the product out of reach from children.

Explanation of the safety symbols on the product

Icon

|

Description

---|---

|

Indication for a hot surface. Contact may cause burns. Do not touch.

Installation

• Check the contents of the package
• Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Use

Before use

1. Clean the product.

• Follow the instructions in chapter “Cleaning & Maintenance”.

2. Place the product on a stable, flat and heat resistant surface.

Frothing and heating milk

1. Remove the lid A4 from the jug A2.

2. Place the mixer A13 or whisk Ae on the bottom of A2.

3. Fill A2 with the desired amount of milk.

• Do not exceed the frothing milk  MAX  indicator A6 or heating milk  MAX  indicator A5.
• Always fill the product between the  MIN  and  MAX  indicators.
• Avoid spillage on the power connector.
• Use cold whole milk to get the best results.

4. Place A4 back on A2.

5. Place A2 on the power base A3.

6. Plug the power cable Aw into the power outlet.

• Press the frothing button Aq to start frothing the milk.
• Press the heating button A9 to start heating the milk.

7. The power indicator LED A8 lights up.

• Press A9 during operation to stop the frothing or heating process.

8. A8 automatically switches off when the frothing or heating is finished.

9. Remove A2.

• Be careful when opening the lid, hot steam may escape.

10. Pour out the milk through the spout A1.

• Wait a minimum of 3 minutes between two cycles.

Stirrer

|

Button

|

Function

|

Maximum capacity

---|---|---|---

|

|

Frothing & Heating

|

150 ml

Frothing

|

|

Heating

|

300 ml

After use

1. Unplug A11 from the power outlet after use.

2. Allow the product to cool down before cleaning it.

3. Clean the product after every use.

• Follow the instructions in chapter “Cleaning & Maintenance”.

Cleaning & Maintenance

•  Unplug the product from the power outlet and allow it to cool down before cleaning and maintenance.
• Never immerse the product in water or place it in a dishwasher.

1. Clean A24er in warm soapy water.

2. Dry with a soft cloth.

• Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
• Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>