Nedis WIFIACMB1WT7 Wi-Fi Smart Air Conditioner User Manual

: June 5, 2024
: nedis

Nedis WIFIACMB1WT7 Wi-Fi Smart Air Conditioner

User Manual

Preface

Thank you for purchasing the Nedis WIFIACMB1WT7.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis WIFIACMB1WT7 is a local air conditioner used for cooling and dehumidifying rooms.

The product is exclusively intended as a local air conditioner for domestic, indoor use.

The product is not intended for professional use.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Wi-Fi Smart Air Conditioner

---|---

Article number

|

WIFIACMB1WT7

Dimensions (l x w x h)

|

377 x 678 x 347 mm

Weight

|

21 kg

Input voltage

|

220 – 240 VAC ; 50 / 60 Hz

Required power

|

792 W

Energy class

|

A

Energy efficiency ratio (EER)

|

2.61

Noise level

|

< 65 dB

Cooling capacity

|

7000 BTU

Room size capacity *

|

10 – 15 m²

Air circulation

|

300 m3/h

Dehumidification

|

17 l/day

Refrigerant

|

R290 / 130 g

Power plug

|

Schuko CEE 7/7

The performance of the air conditioner is subjected to many factors like floor space, ceiling height, level of isolation and number of windows. The data mentioned is based on a space with low heat loads.

Main parts (image A)

A

1. Control panel

2. Swing louvers

3. Handle

4. Exhaust nozzle

5. Exhaust hose

6. Window kit

7. Window kit fasteners

8. Screw

9. Filter frame

10. Filter screen

11. Continuous drainage outlet

12. Air outlet

13. Manual drainage outlet

14. Power cable

15. Exhaust hose connector

16. Remote control

17. Exhaust nozzle screw

Control panel and remote control (Image B)

B

1. Mode indicators

2. Timer button

3. Up button

4. Down button

5. Temperature indicator

6. Power button / Wi-Fi indicator LED

7. Fan mode button

8. Fan speed button

9. Sleep mode button

10. Power button

Safety instructions

WARNING

|

Contains one or more (extremely/highly) flammable components.

---|---

|

Contains one or more (extremely/highly) flammable components.

---|---

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this manual.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
Keep the product out of reach from children.
Do not use a damaged or defective product, but return it for repair or replacement.
Do not expose the product to water, rain, moisture or high humidity.
If the product is immersed in water, do not touch the product or the water.
Shut off the main power grid and carefully remove the plug from the power outlet.
After the product has been immersed or covered in water or other liquids, do not use the product again.
Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
Do not use the product near explosive or flammable materials.
Do not insert any objects into the product.
Do not obstruct or cover the product’s air inlet or outlet grid.
The appliance shall be installed in accordance with national wiring.
Always disconnect the product from the power outlet when cleaning or moving the product.
Do not pull the power cable to move the product.
Unplug the product from the power source and other equipment if problems occur.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Switch off the main power switch before unplugging the power cord.
Do not use the product when the cord or plug is damaged.
Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
Connect to a grounded socket only.
If necessary, use an earthed extension cable of a suitable diameter.
Fully extend the power cord and make sure the power cord does not contact the product.
When using an extension cord, use one which is as short as possible and fully extended.
Do not use external timers or remote control systems to switch the product on or off.
Ensure people do not trip over the cord.
Make sure that the power cable cannot become entangled and does not hang over the edge of a worktop.
Do not leave the product unattended when switched on.
R290 is a refrigerant gas that complies with the European directives on the environment.
Be aware that refrigerants can be odorless.
Place the product in an area without any continuous sources of ignition (for example: open flames, gas or electrical appliances in operation).
Only install, operate and store the product in a room with a floor area above 7 m2.
Only store the product in a well-ventilated area.
Store the product in such a way as to prevent mechanical failure.
When the product is installed, operated or stored in a non-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
Only persons with a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification, can work on or break into a refrigerant circuit.
Servicing can only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of the person competent in the use of flammable refrigerants.
When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.
Do not puncture or heat any part of the refrigerant circuit.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Explanation of the safety symbols on the product

Icon

|

Description

---|---

|

Indication to explain that the product:

Contains one or more (extremely/highly) flammable components.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Installing the product

Place the product on a stable and flat surface.
Only move the product in an upright position.
Leave a minimum of 0.5 m space around the air inlet and outlet to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
Only install, operate and store the product in a room with a floor area above 7 m2.
Keep the product at a distance from flammable objects such as furniture, curtains and similar.
Do not block ventilation openings and make sure that there is enough space around the product.

Assembling the exhaust (image C)

C

Only use the provided exhaust hose.
Do not block the exhaust hose, this may cause overheating.

1. Assemble the exhaust hose A5, the exhaust nozzle A4 and the exhaust hose connector Ay.

2. Slide Ay over the air outlet Ae.

3. Extend A5 up to 1500 mm.

Do not twist the exhaust hose.
Ensure that the exhaust hose does not kink.

4. Assemble the window kit A6 with the fasteners A7.

5. Install A6 in the window opening.

6. Tighten A7.

7. Snap A4 into A6 and fasten with the exhaust nozzle screw Ai.

Place the product on a flat and dry surface.
Assembling the continuous drainage (optional)

1. Open the continuous drainage outlet Ar.

2. Connect Ar to a water container or drainage system (not included).

Installing the Nedis SmartLife app

1. Download the Nedis SmartLife app for Android or iOS on your phone via Google Play or the Apple App Store.

2. Open the Nedis SmartLife app on your phone.

3. Create an account with your mobile phone number or your e-mail address and tap Continue.

4. You will receive a verification code on your mobile phone or e-mail address.

5. Enter the received verification code.

6. Create a password and tap Done.

7. Tap Add Home to create a SmartLife Home.

8. Set your location, choose the rooms you want to connect with and tap Done.

Adding the product to the SmartLife app (image D)

D

1. Switch on the product.

2. Tap + in the Nedis SmartLife app.

3. Select the device type you want to add from the list.

4. Confirm the Wi-Fi indicator LED B6 is blinking fast. Or reset the product during standby mode: Press and hold the fan speed button B8 for 5 seconds until the product emits a tone and B6 starts blinking.

5. Follow the instructions in the Nedis SmartLife app.

Make sure you connect the product to a 2.4 GHz Wi-Fi network.

6. Rename the product after it has been found and added.

7. After confirming you can control the product with your smartphone.

To connect your SmartLife account to Amazon Alexa and/or Google Home, set it up using the “Smart Life” action or skill. For more details check the instruction on either Amazon or Google.

Use

Using the control panel and remote control (image B)

Button

|

Function

---|---

Mode indicators B1

|

Indicates the current fan mode.

Timer button B2

|

Press to set the timer. Use B3 and B4 to set the duration of cooling.

Up button B3

|

Increase values.

Down button B4

|

Decrease values.

Temperature indicator B5

|

Indicates the current temperature.

Power button / Wi-Fi indicator LED B6

|

Switch the product on or off.

Fan mode button B7

|

Repeatedly press the button to select the mode: Cooling mode / Dehumidifying mode / Fan mode.

Fan speed button B8

|

Press repeatedly to select the fan speed.

Sleep mode button B9

|

Activate sleep mode. Only works in cooling mode. After one hour the set temperature increases 1 °C and again after 2 hours.

Power button Bq

|

Switch the product on or off.

Manual drainage

1. Switch off the product using B6

2. Unplug At.

3. Place a water container underneath Ar.

4. Unscrew the manual drainage cap.

5. Remove the water plug.

6. Slightly tilt the product backwards to ensure all water leaves the reservoir.

7. Put back the plug and screw the drainage cap back on.

Maintenance

Cleaning the product (image E)

E

Do not clean the inside of the product.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Avoid abrasives that can damage the surface.
Clean the filter screen A10 once every 2 weeks.

Clean the product regularly as follows:

1. Switch off and unplug the product when not in use or before maintenance.

Allow the product to cool down.

2. Unscrew A8.

3. Remove the filter frame A9.

4. Clean A10 in warm water (about 40 °C) with a neutral detergent.

5. Rinse and dry A10 in the shade.

6. Place back A10, A9 and close with A8.

7. Clean the outside of the product with a soft, clean, lightly damp cloth.

Store the product as follows:

1. Drain the product.

2. Press B6 to switch on the product.

3. Press B8 followed by B8 to switch to low fan speed operation.

4. Wait until A13 is dry.

5. Put back the plug and screw the drainage cap back on.

6. Switch off the product.

7. Unplug the product.

8. Remove the batteries from Au during long periods of disuse to avoid possible leakage.

9. Store the product in a dry place away from sunlight and protect it against excessive dust and dirt.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFIACMB1WT7 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/wifiacmb1wt7#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands