ORION ORFX107 Star Cluster Multifuntion 5 in 1 Effects Light Owner’s Manual
- June 5, 2024
- Orion
Table of Contents
ORION ORFX107 Star Cluster Multifuntion 5 in 1 Effects Light
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS LIGHT. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED TECHNICIANS.
NEVER look directly at the laser emitterasserious eye injury can occur. This symbol indicates that there is laser radiation emitted from this unit. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user The presence of “dangerous” voltage within the product’s enclosure that maybe sufficient magnitude to constitute a risk of electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated.
- Read these instructions thoroughly before using this item. Heed all warnings. Follow all instructions.
- Disconnect from the power source before servicing.
- REPLACE FUSE WITH SAME TYPE AND RATING.
- This product is for indoor use only! To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids.
- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
- Unplug the unit during lightning storms or when unused for long periods of time.
- Allow the unit to cool down after 1 or 2 hours of continuous operation to prevent heat stress damage.
- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
- Make sure the distance between the fixture and the lighted object is not less than 0.5 meters. Keep combustible and/or explosive materials away from this unit. Do not block the ventilation slots.
- In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please return the unit to the nearest authorized technical assistance center.
- The unit should never be connected to any kind of external AC dimmer. Operate only at intended voltage.
- Make sure the power cord is never pinched or damaged.
- Never disconnect the power cord by pulling or tugging on the cord.
- Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.
- ALWAYS use a safety chain or cable between the unit and overhead suspernsion truss to ensure safety to persons.
- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national regulations regarding the safety and operation of equipment are understood and adhered to.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Star Cluster
Multifunction 5 in 1 Effect Light
Features
- Voltage: 100V-240V-, 50/60Hz
- Power: 150W
- Light source: SMD5050x 90 pcs 3 in 1 color 3w x4 pcs UV 4in1 x 6 pcs single color +La ser:R=100MW, G=70MW +Derby: 5mm LED R16,G12,B12,W16
- 4 operation modes: Automatic running, DMX, Sound Active, Primary/Secondary Sound controlled via built-in microphone 0-100 linear dimmer, high power led and low power consumption 11CH/24CH DMX channels selectable
- Weight: 2.5 kgs
Control
Menu display Instruction
DMX address | ADDR | DMX address (0-512) |
---|---|---|
Channel mode | CHND | 11CH/ 24CH |
Primary/Secondary | SLNd | NAST |
Sound mode | SOUN | Sound 0–sound 59 |
SENS 0–100
AUTO| AUTO| AUTO 0–4
Speed 0–9
Display| LED| ON/OFF
Display inversion| DISP| inversion
Software Version| Ver| V11
DMX controller
11 CH Mode
Effect | Channel | DMX Value | Function |
---|
4in1 LED+UV
| 1CH| 0-255| See show table mix color
2CH| 0-255| Mix color effect from slow to fast
3CH
| 0-008| NO strobe
009-255| LED strobe from slow to fast
5050Strobe
| 4CH| 0-255| See show table strobe SMD5370
5CH| 0-255| Strobe effect from slow to fast
6CH
| 0-08| NO Strobe
009-255| Strobe from slow to fast
LED spot
| 7CH| 0-255| See show table spot effect
8CH| 0-255| Spot effect from slow to fact
9CH
| 0-008| NO strobe
009-255| Strobe effect from slow to fast
laser
| ****
10CH
| 000-007| No function
008–255| Show model for laser
11CH| 0-255| Laser effect from slow to fast
24 CH Mode
Effect | Channel | DMX Value | Function |
---|
4in1 LED+UV
| 1CH| 0-255| All dimmer
2CH
| 0–008| NO strobe
009-255| LED strobe from slow to fast
3CH| 0-255| UV dimmer
4CH| 0-255| Color mix 1
5CH| 0-255| Color mix 2
6CH| 0-255| Color effect
7CH| 0-255| Mix color effect from slow to fast
5050Strobe
| 8CH| 00–255| Strobe all dimmer
---|---|---|---
9CH| 000-08| NO Strobe
009-255| Strobe from slow to fast
10CH| 00–255| Strobe effect
11CH| 00–255| Strobe effect from slow to fast
LED spot
| 12CH| 00–255| spot all dimmer
13CH| 0-08| NO Strobe
009-255| Strobe from slow to fast
14CH| 00-255| Color mix 1
15-16CH| ……| ………
17CH| 00-255| Color mix4
18CH| 00-255| Spot effect
19CH| 00-255| Spot effect from slow to fast
laser
| ****
20CH
| 0-7 / 8-127| ON/OFF| Red
128-255| ON&OFF cycle
21CH| 0-7 / 8-127| ON/OFF| Green
128-255| ON&OFF cycle
22CH| 00-010| stop
011-120| Movement forward fast to slow
210–134| Stop
135–245| Movement forward Slow to Fast
246–255| Stop
23CH| 000-007| No function
008–255| Show model for laser
24CH| 0-255| Laser effect from slow to fast
Orion Lighting One (1) Year Manufacturer’s Defect
One Year Limited Warranty: If this product should fail within one year of the
original purchase date due to a manufacturing defect, simply return the
product to your Orion dealer with the original proof of purchase and it will
be repaired free of charge. This warranty excludes damage considered by the
vendor to be the result of improper installation, nomal wear, abuse or
shipping damage. See your Orion dealer for details. Warranty valid in Canada
and the United States. Other teritories may vary.
Distributed in US by:
Yorkville Sound 4625 Witmer Industrial Estate Niagara Fall, New York 14305
Distributed in Canada by:
Yorkville Sound 550 Granite Court Pickering, Ontario L1W 3Y8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>