Davis 6242 Vantage Vue Weather Station User Guide
- June 10, 2024
- DAVIS
Table of Contents
VANTAGE VUE®
QUICK SETUP GUIDE
6242 Vantage Vue Weather Station
-
Prepare the Sensor Suite: attach wind cups and wind vane; pull tab on battery (or install battery if not included); install debris screen and rain collector tipping spoon assembly.
-
Download the Weather Link app. If using Weather Link Live, power it up and use the Weather Link app to set it up. If using Weather Link Console, power it up and follow the on-screen prompts to set it up.
-
Verify data transmission from the Sensor Suite to the Weather Link app or to the Console.
Note: For best reception during this step, Weather Link Live and/or Console and the Sensor Suite should be at least 10 feet (3 meters) apart. (Initial reception typically takes 1-3 minutes but can take up to 10 minutes depending on specific environmental conditions.) -
Mount the Sensor Suite to its outside mounting pole.
Please refer to your manuals for detailed instructions.
Manuals can be downloaded at www.davisinstruments.com/vv-
manual.
Copyright ©2023 Davis Instruments Corp. All rights reserved.
07395.405 Rev. A 2/9/2023
Documents / Resources
|
Davis 6242 Vantage Vue Weather
Station
[pdf] User Guide
6242 Vantage Vue Weather Station, 6242, Vantage Vue Weather Station, Weather
Station
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>