DENON AVC-X8500H Integrated Network AV Amplifier User Guide

: June 3, 2024
: Denon

Table of Contents

Before You Begin
What’s In the Box
Important: External Antennas
Setup
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DENON AVC-X8500H Integrated Network AV Amplifier User Guide

Welcome

Thank you for choosing a Denon AV receiver.
This guide provides step-by-step instructions for setting up your AV receiver.

Please do not return this unit to the store – call for assistance. If you need help… :
If you need additional help in solving problems, contact Denon customer service in your area.
www.denon.com

Before You Begin

Required for Setup

Optional

When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
These drawings are for illustrative purposes only and may not represent the actual product(s).

What’s In the Box

Package Content

The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.

Important: External Antennas

The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the AVC-X8500H.

Connecting the external antennas for Bluetooth / Wireless connectivity

For each of the two antennas:

Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
Turn the antenna clockwise until it is fully connected. Do not over tighten.
Rotate the antenna upwards for the best possible reception.

Setup

There are four steps to the setup process.

Installing batteries in the remote control unit
Connecting the receiver
Following the On-Screen Setup Assistant
Downloading the Mobile Apps

Installing batteries in the remote control unit

Connecting the receiver

Place the receiver near your TV and connect the power cord
Connect the receiver to your home network.
Wired LAN
Connect an Ethernet cable (not included) between your receiver and your network router.

Wireless LAN
When connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth / Wireless connectivity” and connect the antennas.
Connect the receiver to your TV with an HDMI cable

ARC (Audio Return Channel):
If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc…) ARC requires that you enable HDMI CEC on your TV. Please refer to your TV’s Owner’s Manual for instructions on how to setup HDMI CEC. Note that some TV manufacturers use other names for the HDMI CEC function.
Turn on the TV
Select the appropriate HDMI input on your TV.
Turn on the receiver
- Press to turn on the receiver.
Verify the connection
- Verify that you can see this screen on your TV.

If this screen is not displayed, please go back and retry the steps again in the recommended sequence.

Following the On-Screen Setup Assistant

The Setup Assistant will walk you through connecting and configuring your speakers and components to your Denon receiver. Please use the remote control and follow the on-screen instructions.
On-Screen Setup Assistant

Downloading the Mobile Apps

Download both the “HEOS” App and the “Denon 2016 AVR Remote” App for the full home entertainment experience. The HEOS App is required to access online music through your AVR.

HEOS

The HEOS App allows you to explore, browse, and play music from many online streaming services or from your own music library.

Denon 2016 AVR Remote

Control your new AVR with the latest Denon 2016 AVR Remote App. Volume control, sound mode selection and advanced settings are always only a tap away.