Nedis ACAM11BK Action Camera User Manual

: June 5, 2024
: nedis

Nedis ACAM11BK Action Camera

User Manual

Preface

Thank you for purchasing the Nedis ACAM11BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

The Nedis ACAM11BK is a small and lightweight action camera that enables you to make HD images and video.

Intended use

This product is intended as a recording device.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Action camera

---|---

Article number

|

ACAM11BK

Dimensions (l x w x h)

|

60 x 31 x 41 mm

Battery Capacity

|

900 mAh

Memory

|

MicroSD card (2 – 32 GB) (not included)

Camera lens

|

Viewing angle = 100 degrees

Image format

|

.jpg

Image resolution

|

0.3 MP – 5 MP

Video format

|

.avi

Video resolution

|

640 x 480 px – 1280 x 720 px

Frame speed

|

30 fps

Recording time

|

≥ 1.5 hours

Display

|

2.0 LTPS

Current

|

Standby: 170 mAh

Working: 190 mAh

Charging time

|

3 hours

Parts list

1. OK button

2. Power indicator LED

3. Power button

4. Camera lens

5. UP button

6. DOWN button

7. Speaker

8. Display

9. Charging indicator LED

10 Status indicator LED

11. Battery cover

12. Microphone

13. Micro USB port

14. MicroSD card slot

Additional parts (not shown in illustration)

15. Battery

16. Waterproof housing

17. Mounting accessories (x5)

18. Bandages

19. Micro USB cable

20. 3M mats

Safety instructions

WARNING

Only use the product as described in this manual.
Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if problems occur.
Do not expose the product to water or moisture.

Installation

Check the contents of the package
Check that all parts from the parts list are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Insert or change memory card

A microSD card (not included) is required to take pictures or videos. Insert the microSD card into the microSD card slot A14.
Use a microSD card with a maximum of 32 GB storage capacity.
Format the microSD card before use.

Battery

Charge the camera from any USB outlet with the supplied micro USB cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.
When battery level is low, a low battery notification is shown on the screen and the camera turns off.

Turn on camera

Hold the power button 3 for about 3 seconds until the status indicator LED q lights up blue. A welcome screen appears, and the camera enters video mode.

Switching between modes

|

Video mode

---|---

|

Picture mode

|

Playback mode

|

Setup mode

Switch between modes by pressing the power button 3.

Attachment

Attach the action camera into the protective casing. The protective casing can be fitted with supplied mounting accessory to your clothing, action gear, helmet, etc.
Make sure the attachment is secure.
Make sure the camera does not impede your movement, view, or operation of your action gear.
Only operate the camera while you are safe and still.

Use

Record pictures and video images
In video mode, press OK to start or stop recording video.
In picture mode, press OK to take a picture.
View pictures and video images
In view mode, press UP or DOWN to go to the next or previous picture or video. Press OK to play and stop videos.
Settings menu navigation
In the settings menu, use UP and DOWN to navigate between options. Press OK to select and confirm options.

Setting

|

Description

---|---

Video resolution

|

Select the video resolution.

Date stamp

|

Enable or disable imprinted date and time on the pictures.

Motion detection

|

When the camera detects movement, video is recorded. The recording ends when no movement is detected for 10 seconds.

Loop recording

|

Select the time length of video sections. This determines the skipping time in playback mode.

Record audio

|

Enable or disable the recording of sounds in video images.

Exposure

|

Compensate exposure when videos or photos are too light or too dark.

Video lapse

|

Take a series of pictures at the selected interval in video mode. These can be played back as a time lapse video.

WDR

|

The Wide Dynamic Range feature for pictures improves the exposure. This is helpful to make dark areas look lighter.

Camera resolution

|

Select the image size.

Delete

|

Delete current or all pictures and videos except for protected files.

Protect

|

Protect current or all pictures and videos.

Volume

|

Control the volume coming out of the camera speakers.

Format

|

Delete all files on the microSD card.

Language

|

Select the desired operating language for the camera.

Auto power off

|

Select the time period after which the camera turns off when not recording.

Screensaver

|

Select the time period after which the display turns off to save power.

Default setting

|

Return all settings to manufacturer defaults.

Frequency

|

Select the frequency of your power outlet.

Delay pictures

|

Enable or disable a timer function to take pictures with a delay.

Date / time

|

Set the current date and time.

Version

|

View the version of the software.

Transfer files to external device.
Connect the camera to your device with the micro USB cable. Transfer files you want to save to your device.
Alternatively, take the microSD card from your camera and insert it into a card reader that is connected to your device.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---