Nedis ALRMPW20AT Alarm Bracelet User Manual
- June 5, 2024
- nedis
Table of Contents
Nedis ALRMPW20AT Alarm Bracelet
User Manual
Preface
Thank you for purchasing the Nedis ALRMPW20AT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis ALRMPW20AT is an alarm bracelet for activities such as jogging, swimming and cycling.
At the push of a button, the bracelet emits a powerful 120 dB sound that deters attackers and alerts bystanders.
The bracelet has a red LED light and is waterproof.
Intended use
The product is exclusively intended as an emergency alarm bracelet.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Nedis Alarm bracelet
---|---
Article number
|
ALRMPW20AT
Dimensions (l x w x h)
|
245 x 45 x 12 mm
Weight
|
29 g
Noise level
|
120 dB ± 2 dB ≤ 100 mm
80 dB ± 2 dB ≤ 1 m
76 dB ± 2 dB (in the water)
Batteries
|
2 x CR2032 3V (Included)
Battery life
|
Up to 1 year (standby)
Up to 12 hrs (alarm)
Up to 12 hrs (LED light)
IP rating
|
IP66
Current
|
0.01 mA (standby)
≤ 75 mA (alarm)
≤ 25 mA (LED light)
Operating temperature
|
-20°C – 40°C
Parts list
1. LED light
2. Alarm button
3. Siren
4. Side button
5. Battery cover
6. Screw
7. Wristband
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use a damaged product.
Installation
- Check the contents of the package
- Check that all parts from the parts list are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Installation of the battery
1. Loosen the screws 6 on the battery cover 5.
2. Pull the battery cover 5 out of the housing.
3. Insert the batteries.
- Make sure to match the (+) and (-) polarity markings.
4. Place the battery cover 5 on the housing.
5. Tighten the screws 6.
Installation of the alarm bracelet
1. Place the alarm bracelet on your wrist.
2. Pull the loop of the wristband 7 through the slot.
3. Secure the wristband 7 at the desired length.
Use
Turn the alarm on and off
1. Hold the alarm button 2 shortly to turn the alarm on.
2. Hold the alarm button 2 again briefly to silence the alarm.
Turn the LED light on and off
1. Hold the side button 4 briefly to turn on the LED light.
2. Hold the side button 4 again briefly to make the LED light blink.
3. Hold the side button 4 again briefly to turn off the LED light.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>