bertoni W1224CEEB Baby Walker User Manual
- June 8, 2024
- bertoni
Table of Contents
bertoni W1224CEEB Baby Walker
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
IMPORTANT! READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE!
WARNING
- Prevent access to stairs, steps, and uneven surfaces
- Never leave the child unattended
- The child will be able to reach further and move rapidly when in the baby’s walking frame
- Guard all fires, heating, and cooking appliances
- Remove hot liquids, electrical cables, and other potential hazards from reach
- Prevent collisions with glass in doors, windows, and furniture
- Keep away from a flame.
- The child will be able to reach further and move
- Guard all fires, heating, and cooking appliances.
- This product is not suited to a baby who can not sit or one who can walk.
- Before using, please make sure all locking devices are locked.
- When the child is in the baby walker its legs must be in touch with the ground.
- Do not lift and move the baby walker when the child is in it.
- The height of the seat should be adjusted appropriately so as to avoid other injuries occurring to the baby.
- Keep covering away from children to avoid suffocation.
- Do not place any load on the baby walker otherwise, it will affect the stability of the product.
- Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
SAFETY REQUIREMENTS
- This product is intended only for a child, which can sit on its own until it can walk on its own or weighs more than 12kg.
- This baby walker should be used only for short periods (for example, 20 minutes).
- Do not use the product if some elements are broken or missing.
- Do not use accessories or spare parts different from those approved by the manufacturer.
- To avoid possible risks of injury or suffocation, do not place this product in the baby’s bed or the playpen. Do not attach additional cords/ ropes to the toy.
- Small parts. Hazard of ingestion and choking! If applicable, remove the plastic holders, threads, and packing before giving the toy to the child. Do not modify the toy and do not hang it to other objects. Do not wet the toy and the battery compartment. Keep the product away from direct sunlight and other sources of heat. Do not expose the product to moisture or water. Use this product only on the floor. To be assembled only by adults.
EN 1273:2020 / EN 62115 / EN 71
MAINTENANCE AND CARE
In order to ensure that your children are away from accidental injuries please, carry out regular inspection and maintenance of the baby walker.
- The baby walker is the tool for the baby to learn to walk. To avoid accidents with the child please regularly check the product.
- Check the belts, the bolts, and all parts before use
- Check if the locking mechanism is in good order.
- For the protection of the baby’s health and cleanliness, the seat should always be washed and dried.
- This baby walker is made of plastic, iron pipes, cloth, and a sponge. Do not store the baby cot in wet, cold, or high-temperature environments.
- Do not overload the baby walker.
ASSEMBLING
INSTALLATION OF THE WHEELS AND RUBBER STOPPERS
Insert the wheels and the rubber stoppers into the corresponding openings on
the base plate and press the wheel axles into the bottom in order to avoid
their dropping down. Picture 1 Install 2 stoppers at each side of the baby
walker, near the wheels as shown in the picture
- Note: Do not put stoppers in the middle of the long sides!
- WARNING: Always use the stoppers to prevent falling off the stairs!
INSTALLATION OF THE SEAT
- Put the PVC strip sewn on the back of the seat cloth into the reserved groove on the top tray of the walker.
- Hook the seat holes of the PVC strip to the hook teeth on the groove.
- Press them into it with the thumb or forefinger. Picture 2;3
INSTALLATION OF THE MUSIC PLATE
- Open the cover of the battery box at the back of the toy tray.
- Install two 1,5V AA batteries ( Picture 6) and then the toy tray can be operated
- Install the toy tray on the main tray while installing first the front edge ( Picture 4) and after rotating the fixators,,3″ from both sides.
Notes:
- Insert two 1.5V AA batteries with the correct polarity.
- Use non-rechargeable batteries.
- Different types of new and used batteries can not be used in the mixture.
- Exhausted batteries should be removed.
- When the batteries are not in use please, take them out.
- The supply terminal is not to be short-circuited.
HEIGHT ADJUSTMENT
Rotate the button under the tray counterclockwise, 1″ (Picture 5), and push the front edge up,,2″ to unlock.
There are useful instructions on the riser please, read them carefully
OPTION SWING
Haul the two buttons up, which are on the same side of the bottom tray at
the same time. ( Picture 7) Then turn the bottom tray perpendicular to the
floor. Picture 8
FOLDING OF BABY WALKER
Rotate the button under the tray counterclockwise, 1″ (Picture 5), and push
the front edge up,,2″ to unlock. Lower the tray down. For full folding of the
baby, the walker pulls together the buttons on both sides of the frame into
the front end. Picture 9
BATTERIES SAFETY INFORMATION
The product needs alkaline batteries (not included in the set). To be assembled by an adult. Battery safety information
ATTENTION!
In certain cases, the batteries may leak liquids, which may cause chemical
burning or may damage the product. To prevent leakage from the batteries:
- Do not mix old and new batteries or batteries of a different type.
- Place the batteries as shown inside the batteries compartment.
- If the product will not be used for a longer time, remove the batteries. When batteries are depleted, remove them from the product. Discard safely the batteries, Do not throw batteries in a fire. Batteries may explode or leak.
- Do not cause a short circuit in the batteries.
- Use only identical batteries or batteries of one type, according to the recommendations.
- Do not recharge batteries, which are not rechargeable.
Batteries contain substances that are harmful to the environment. Do not throw the batteries together with ordinary household waste but deliver them to a specialized place for collecting batteries. Always remove the battery before disposal of the device or delivering it to an official waste collection point.
IMPORTANT!
After the end of the service life of the device, do not dispose of it together
with ordinary household waste but deliver it to an official collection point.
Thus you will help with environmental protection.
Protect the environment by not disposing of this product with household waste (2012/19/EU). Check the recommendations to local authorities about recycling (Only for Europe).
Didis LTD, Bulgaria
Shumen 9700, № 6 Trakia-iztok street
Тel.: +359 54 850 830
e-mail: home.market@didis-ltd.com.
e-mail: export@didis-ltd.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>