Yuying E28 Projector User Manual

June 15, 2024
Yuying

Yuying E28 Projector User Manual
Yuying E28 Projector

Packing List

  • instructions

  • Remote control

  • Power cord

Remote control button function

Remote control button function

  1. Power Switch
  2. Home key
  3. Volume down
  4. Volume increase
  5. Mute key
  6. OK key
  7. Direction key
  8. Return key
  9. Menu function key
  10. Set key
  11. Focusing+
  12. Focusing-
  13. 5mm audio output port
  14. HDMI interface
  15. USB multimedia player interface
    Remote control button function

Specifications

Product name: Projector
Display principle: LCD
Light bulb: LED
Input voltage: AC110~240V
Language: English, French, Italian, Spanish, German etc
Projection method: Front or rear
Working environment: o-3s0c
Operation mode: Remote control
Output interface: Bluetooth 5.0 / 3.5mm Audio output HDMI
Input interface: USB

Protective ratio

Please keep a distance of 1.8-3 meters to obtain the best movie watching experience.
The lens distortion is at a minimum in that range.
Protective ratio

Adjust sharpness

First dim the room, the darker the better. Draw the curtains during the day and turn off the lights at night.Connect the projector to the power supply, press the power button, take out the remote control and press the left and right focus button. Adjust until the picture is clear. (The best projection range is between 1.8m and 3m).

  • Press the power button, the blurred picture appears.

  • Long press the left-right focus button in the lower right corner.

  • Adjust until the picture is clear

Electric focus

  1. Place the lens of the projector perpendicular to the projection screen.
  2. Press F+ on the remote control to reset the lens position to the innermost part.
  3. Press Fon the remote control again to turn out the lens until the image is clear, that is, the image is focused.
  4. In the process of focusing, you can play programs or call up the menu of products to adjust the focus.
    Electric focus

Projection Settings

Click to open [Setting], click to open [Projection Setting], select [Four Points] in [Trapezoid Correction), click to open [Manual Trapezoid Correction], press(Up, Down, Left, Right] of the remote control to adjust, and press [OK] to select points.

  • Click to open projection settings
    Projection Settings

  • Set here for trapezoidal correction
    Projection Settings

  • Click 1o open manual trapezoidal connection
    Projection Settings

  • Manual trapezoidal correction

  • Automatism trapezoid correction

  • Picture zoom
    Picture zoom

Mobile phone connected to projec to

Open settings Enter the Screen cast.
Mobile phone and projector must be used under the same Bluetooth.

Enter the mobile phone projection APP
Mobile phone connected to projec to
Mobile phoneand projection must belinked to the same Bluetooth
Mobile phone connected to projec to

Phone on the same screen

  1. Make sure that your iOS device is connected to the same Bluetooth that your projector is connected to.
  2. On your iOS device, open Control Center and tap Screen Mirroring.
  3. Select PROJECTOR-XXXXXX from the list.

Note & Tips

Blurry Image
Adjust the keystone, focus ring, and the projector distance.
USB/TF UNRECOGNIZED
Make sure your USB STICK/TF CARD is not over 32GB
Videos Cannot Display
Make sure the videos are not limited to copyright such as Amazonprime video, Netflix, Hulu etc.
No Sound
Turn off Dolby audio in your device; External speaker is required for VGA connection.

CAUTION

No components that can be repaired by users exist in the projector.Do not open the projector without authorization to avoid electric shock. Contact your authorized professionals for repair as needed.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Symbols

Documents / Resources

| Yuying E28 Projector [pdf] User Manual
E28 Projector, E28, Projector
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals