ADLER AD 1186 LED Clock with Thermometer User Manual
- June 5, 2024
- ADLER
Table of Contents
AD 1186
User Manual
AD 1186 LED Clock with Thermometer
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial
purposes.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V~ 50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using children. Do not let the children play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid
hazardous situations. -
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let the cord hang over the edge of a counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
-
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
-
Avoid getting the device wet.
-
The device may only be wiped with a dry cloth. Do not use water or cleaning fluids.
-
The device should be kept in a dry room.
1. SETTING – ALARM
2. SETTING – DATE
3. SETTING – TIME
4. SNOOZE / DIMMER
5. UP
6. DOWN| 7. DATE
8. LED Display
9. Battery Compartment
10. Speaker
11. %RH- Humidity %
12. °C – Temperature inside
---|---
AC POWER OPERATION
Before connecting to the power supply ensure that the supply corresponds to
the information on the rating label on the bottom of the apparatus.
CLOCK
- Connect the Mains Lead to the power supply.
- Long press the SETTING – TIME (3) button and the display HOUR will flash. Then you can press the UP (5) or DOWN (6) button to adjust the hour.
- After completing the hour setting. You short press the SETTING – TIME (3) button, display MINUTE will flash. Now you can press the UP (5) or DOWN (6) button to adjust the minute.
- Finally, you press the SETTING – TIME (3) button. The current time can be set.
DATE
- Long press the SETTING – DATE (2) button, and display YEAR will flash. Then you can press the UP (5) or DOWN (6) button to adjust the year.
- After completing the year setting. You short press the SETTING – DATE (2) button, display MONTH will flash. Now you can press the UP (5) or DOWN (6) button to adjust the month.
- After completing the month setting. You short press the SETTING – DATE (2) button and the display DAY will flash. Now you can press the UP (5) or DOWN (6) button to adjust the day.
- Finally, you press the SETTING – DATE (2) button. The current date can be set.
- You can short press the DATE (7) button to see the current date.
ALARM
- Long press the SETTING – ALARM (1) button. Use the same procedures of setting the “CLOCK” to adjust your desired alarm time.
- The alarm can be temporarily stopped for 9 minutes by pressing the SNOOZE / DIMMER (4) button. This can be repeated up to 5 times.
- The alarm will switch off automatically after 120 minutes or can be canceled by pressing the SETTING – ALARM (1) button.
- The alarm will be active again after 24 hours unless pressing the SETTING – ALARM (1) to turn off the alarm icon on the display.
SNOOZE
- When the alarm is activated you can press the SNOOZE / DIMMER (4) button. It will pause the alarm for 9 minutes. After that, it will buzz again.
DIMMER
- During normal operations and the alarm not ringing. You can press the SNOOZE / DIMMER (4) button to toggle between 2 display brightness settings.
BATTERY BACK-UP
Inset a 9-volt battery (not included) in the compartment located at the back
of the device (9); use preferably a long-life battery. In case of temporary
power failure, the battery will keep the time settings even if the display
won’t show.
Note: The effectiveness of this feature depends entirely on the freshness
of your battery.
The circuit will not keep the right time if the battery is old or of poor
quality.
CLEANING
Clean the body with a soft cloth moistened with water or mild detergent. Do not use solvents such as alcohol, benzine, or thinner, as they may damage the cabinet finish. Make sure to disconnect the mains lead from the supply before cleaning. Please retain these instructions for future reference.
SPECIFICATIONS
Power Source: 230V~50Hz
DC9V (For backup)
Power Output: 3W
To protect your environment: please separate carton boxes and plastic bags and
dispose of them in corresponding waste bins.
The used appliances should be delivered to the dedicated collecting points due
to hazardous components, which may affect the environment. Do not dispose of
this appliance in the common waste bin.
|
---|---