ADLER AD 8082 Ice Cube Maker User Manual

ADLER AD 8082 Ice Cube Maker

GENERAL SAFETY CONDITIONS

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

1. Before using the device, read the operating instructions and follow the instructions contained therein. The manufacturer is not liable for any damage caused by the use of the device contrary to its intended use or improper operation.
2. The appliance is intended for domestic use only. Do not use for other purposes inconsistent with its intended use.
3. The device must only be connected to an earthed socket 220-240 V- 50/60 Hz. In order to increase the safety of use, many electric devices should not be connected to one electric circuit simultaneously.
4. Be especially careful when using the device when children are in the vicinity. Do not allow children to play with the device and do not let children or people unfamiliar with the device use it.
5. WARNING: This equipment may be used by children over 8 years of age and people with reduced physical, sensory or mental abilities, or people with no experience or knowledge of the equipment, if this is done under the supervision of the person responsible for their safety or has been provided to them. instructions on the safe use of the device and are aware of the dangers associated with its use. Children should not play with theequipment. Cleaning and user maintenance should not be performed by children unless they are over 8 years of age and these activities are performed under supervision.
6. Always remove the plug from the outlet after use, holding the outlet with your hand. DO NOT pull on the cord.
7. Do not immerse the cable, plug, and the entire device in water or any other liquid. Do not expose the device to weather conditions (rain, sun, etc.) or use it in high humidity] conditions (bathrooms, damp mobile homes)
8. Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialist repair shop in order to avoid a hazard.
9. Do not usė the appliance with a damaged power cord, or if it has been dropped or] damaged in any way, or if it is not working properly. Do not repair the device yourself as there is a risk of electric shock. Take the damaged device to an appropriate service center for inspection or repair. Any repairs may only be performed by authorized service points. Incorrectly performed repairs can pose a serious threat to the user.
10. Place the device on a cool, stable, even surface, away from any kitchen appliances that heat up, such as: an electric cooker, gas burner, etc ..
11. Do not use the device near flammable materials.
12. The power cord must not hang over the edge of the table or touch hot surfaces.
13. Do not leave the device or the power adapter in the socket unattended when it is Switched on.
14. For additional protection, it is advisable to install a residual current device (RCD) in the electrical circuit with a rated residual current not exceeding 30 mA. A specialist electrician should be consulted in this regard.
15. Do not leave the device turned on or the power adapter in the outlet unattended.
16. Only use the original assembly parts that came with the icemaker.
17. In the case of power cables, úse only the original cables included in the set, or other cables recommended by the manufacturer.
18. Only use the icemaker in an upright position.
19. Do not expose the icemaker to direct sunlight, rain, snow, excessive moisture, etc.
20. Keep space around the ventilation openings. Covering them will reduce the cooling capacity and may damage the icemaker.
21. CAUTION: FILL ONLY WITH DRINKING WATER.
22. The appliance is for domestic use only.
23. Protect the cooling system from damage
24. This equipment contains high-pressure refrigerant. Do not modify the device. The device may only be serviced by a qualified- authorized service center.
25. When positioning the equipment, make sure that the power cord is not pinched or damaged.
26. Do not stack extension cords or portable power adapters on the back of this apparatus.

CAUTION: RISK OF FIRE

Installation

1. Place the icemaker on a level, level surface.
2. Pour water up to the line marked inside the machine.
3. Activate the device as a contact.

Device Description (Img. 1) ice cube maker

1. Cover
2. Control Panel
3. Water Drain Cap
4. Ice Full sensor
5. Ice Scoop
6. lce basket
7. Air outlet
8. Maximum Water Level: (Not Shown on the image)

**Control Panel Description

**

• lce size selection indicator: Smal or Large
• Power indicator
• lce Full indicator
• Add water indicator
• On/Off button
• lce size selection button

Before first use

1. Remove all packing materials from the outside and inside of the device.
2. Clean the body and insides of the device with a soft cloth using a light cleaning solution of water and dish cleaning soap.
3. Dry the data in a place where it is not in direct sunlight. away from any heat sources like for example Heat stove, electric cooker
4. Make sure the device has enough space around the air intake and exhaust and tis standing on lat and even surface.
5. On each side no device should nave at least1 cm or free space around It
6. wait around 1 hour after moving for the cooling gas inside to settle. If not done so, the device might be damaged or broken.

Usage of the device

1. Check t the water drain cap is in place and plugged in correctly
2. Add water to the device. (Please use only clean drinking water.) Do not exceed the maximum water level line (8) shown inside the device.
3. Plug the device into the mains power.
4. The device will enter standby mode. It is indicated by the blinking power indicator (B).
5. Turn on the device by pressing tne on-off Button (E)
6. The device will turn on and the Power indicator button (B) will stay lit and the ice selection indicator will also stay lit showing the Gurent ie up eectonether mail or big recommended to use me Smal size of the ice cubes t tme ambient  temperature is above 15 ° C / 60 ° F to avoid the ice cubes sticking together.)
7. You can change the size of the ice cube size by pressing the lce size selection button (F).
8. The device will produce ice cubes until it runs out of water. Please take out the produced ice cubes after each use. Do not leave the ice
9. Cubes in the basket. They will melt and be made into ice cubes again and again.
10. Use the attached lace scoop (5) to take the finished ice cubes out of the basket.
11. When the device has used up all the water to produce ice cubes the Add Water indicator (D) Will turn on. Remove all remaining ice cubes and add water into the device.
12. After finishing work with the device. Please remove the water drain cap (3) and move the device so that all of the remaining water drains down it. Then please use an paper towel to dry the devices inside so no water remains.
13. Replace the water drain cap.

SPECFICATIONS

• Supply voltage: 220-240V 50Hz
• Rated current: 2.4A
• lce cube production: 12 kg/24 hours
• NOIse emission value: <47 dB
• Capacity water container: approx. 2 liters
• Refrigerant: R600a / 239
• Gas: C5H10
• Climate class: SN/N/ST/T

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may effect the environment. Do not dispose of this appliance in the common waste bin.

COMPANY PRODUCTS

• WWW.ADLEREUROPE.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>