ZENEC Z-E2055 Car Radio DAB Plus Infotainer Carplay Instructions
- June 5, 2024
- ZENEC
Table of Contents
ZENEC Z-E2055 Car Radio DAB Plus Infotainer Carplay
Requirements
The update consists of a complete MainSystem software update, which must be run from USB data carrier. You will need:
- USB removable storage device (USB stick) with at least 2 GB storage capacity.
- A PC or notebook with Windows operating system.
Please note : Before you start, the USB stick must be formatted with FAT
32. (Right-click on USB memory device in Windows Explorer. Select “Format” >
FAT 32 > Start.
The ZENEC Z-E2055 restarts several times during the software update and stays
off, among other things, for a few seconds (black screen for approx. 3 ~ 5
sec.) before the device restarts. Please do not operate or switch off the
device during the update process. After successful installation the tuner
source will come up.
Installation of the main system software update via USB
The MainSystem software can be found at: www.zenec.com > Support > Software
Updates > Z-E2055
Link: http://www.zenec.com/support/software-updates/z-e2055/?lang=en
-
Download the Software Update “Z-E2055_SW_v1.6.exe”.
-
The software package is a self-unzipping executable. Start extraction with a double-click and select your USB stick as target
for the uncompressed fi les. -
Youobtain four fi les called „DownLoad.bin“ / „DownLoad_f100.bin“ / “ISPBOOOT.bin” / “ISPBOOOT_UPDATE.bin “ / “sppf_mcu32.img“ and „sppf_mcu32f100.img“ in the root directory of the USB stick.
-
Connect the USB stick to the Z-E2055 USB-1 connection cable.
-
Go to the device menu:
Settings > System > Software Update and confi rm by tapping on the green hook checkbox -
Tap on the white hook button at the grey checkbox to start the update process.
-
The update installs sequentially and the lower part of the display screen informs about the progress. The software installation takes about 2~3 minutes. (The OS will be updated fi rst after than the MCU)
-
After successful software installation, the device reboots and then a text pop-up “…Done!…” with an OK button will show up.
-
Remove the USB stick and confi rm by tapping on the OK button
-
The device reboots and then the TUNER page will show up.
-
Load factory Setup > System > Load Factory and confi rm by tapping the green hook checkbox. Tap on green hook of the LoadFactory window.
Please do not operate or switch off the device during the restart process (duration approx. 3 minutes). After restart, the Tuner page will show up.
Note: After the loading factory defaults, some personal settings must be set again (such as camera grid lines, audio settings etc.). -
Version control
After installing the software update a version check needs to be carried out. In the device menu:
Settings > System > Software Version Info. Version: v1.6
Improvements + Bugfixes
MAIN SYSTEM
- Improved system stability and performance
BLUETOOTH
- Bugfix for wrong contact ABC sorting by fi rst-/last name setting
CAN-BUS
- Bugfix for the Car status GUI display issue
- Bugfix for wrong OE DSP Amp values are loaded during initialization after device power ON (ACC ON)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>