ZENEC Z-E1010 MIB2 Update Installation Installation Guide

ZENEC Z-E1010 MIB2 Update Installation

Requirements

The update consists of a complete MainSystem software update, which is carried out using a USB data carrier got to. You need:

• USB removable storage device (USB stick) with at least 2 GB storage capacity.
• A PC or notebook with Windows operating system

The USB stick must be formatted with FAT 32 before use. (Right click on USB removable disk in Windows Explorer > select “Format” > FAT 32 > Start. The ZENEC Z-E1010 restarts several times during the software update and stays off for a few seconds, among other things (black screen for about 5~10 sec) before the device restarts. Please do not turn off the device during the update processoperate or turn off.

 **ATTENTION** : After successful software installation, the Z-E1010 device must be used on MIB2 High-Speed ​​CAN
data detection (!)
**Installation of the MainSystem software update via USB:**
The MainSystem software can be found at: www.zenec.com > Support > Software Updates > Z-E1010
Link: <http://www.zenec.com/support/software-updates/software-update-e-go-core-z-e1010/>
Download the software update "Z-E1010_Core_v3.0.exe".
![ZENEC-Z-E1010-MIB2-Update-Installation-fig-1](https://manuals.plus/wp-content/uploads/2022/08/ZENEC-Z-E1010-MIB2-Update-Installation-fig-1.png)


The software update is a self-extracting file. Select "Run" and then your target directory formatted USB removable drive and start the unpacking process with "Extract".You will receive the update file "Android7.1.2_20211019.1431_zenec_core.img" in the main directory of your USB removable medium




Connect the USB stick to the USB-1 connection cable of the Z-E1010. In the device menu, go to: Settings > System > Software Update and confirm this by tapping the green tick
![ZENEC-Z-E1010-MIB2-Update-Installation-fig-3](https://manuals.plus/wp-content/uploads/2022/08/ZENEC-Z-E1010-MIB2-Update-Installation-fig-3.png)



The update menu will appear automatically. Make sure that the radio buttons [TUNER DB] and [OS] are selected.Now tap on the "YES" field to start the update process
![ZENEC-Z-E1010-MIB2-Update-Installation-fig-4](https://manuals.plus/wp-content/uploads/2022/08/ZENEC-Z-E1010-MIB2-Update-Installation-fig-4.png)The update will now be installed sequentially and the lower part of the screen provides information about the current progress. The software installation takes about 2~3 minutes. 9.
![ZENEC-Z-E1010-MIB2-Update-Installation-fig-5](https://manuals.plus/wp-content/uploads/2022/08/ZENEC-Z-E1010-MIB2-Update-Installation-fig-5.png)



After successful software installation, the device reboots several times, then the Main Menu is displayed. Remove the USB stick.
**Attention** : The desired vehicle platform (MIB2) must be set. To set the MIB2 vehicle platform a password must be entered (to avoid unintentional conversion).

In the device main menu, tap on the "Settings" icon ► "Enter password" and enter 778166. Confirm your entry with "OK". And confirm with "YES" the query "MIB2 platform update" popup window.


![ZENEC-Z-E1010-MIB2-Update-Installation-fig-7](https://manuals.plus/wp-content/uploads/2022/08/ZENEC-Z-E1010-MIB2-Update-Installation-fig-7.png)


Please do not operate or switch off the device during the restart (duration approx. 3 minutes). After a successful restart, the main menu (MainMenu) is displayed

MAINSYSTEM

• Improved system stability and system performance

• iGO log update to fix roundabout exit number flickering in MFA

• In conjunction with the latest iGO navigation software. Update is available via Naviextras Toolbox www.naviextras.com

  TUNER Local tuner slideshow database update to v1.20

  CAN-BUS / CAR MENU / MFA – (MIB-2 vehicle models)

• Headlight range control for VW Passat, Skoda Octavia and other VW/Skoda models, adjustable via Car Menu Setup

• Setting for the ambient interior lighting, adjustable via Car Menu Setup

• Improved driving mode, the button in the dashboard opens the driving mode profiles with the currently selected mode. Currently supported profiles: Eco, Comfort, Normal, Sport, Individual.

• Webasto parking heater integration, individual days can now also be programmed

• Setting for dynamic chassis (DDC) in Drive Mode, adjustable via Car Menu Setup

• Support for steering wheel heating 

• Setting for vehicles with windscreen heating

• Seat ventilation setting

• Fatigue detection setting

• Rear Traffic Alert setting

• Lower mirror setting in reverse

• Support for lane departure warning

• Activation of the display of traffic signs on the instrument cluster (MFA) via the front camera

**CAMERA

**

• Support for 360° / OE Birdview camera system MEDIA PLAYERS
• Bug fix for sometimes occurring last playback problem on USB-2 BLUETOOTH
• Font and brightness adjustment in the various Bluetooth displays

References

• Naviextras.com - Map updates for your navigation device and more...
• ZENEC – Touch another World
• Z-E1010 - ZENEC

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>