ZENEC Z-E3766 car Hifi Instructions
- June 5, 2024
- ZENEC
Table of Contents
Z-E3766 Update Instructions MainSystem
Requirements
The update consists of a complete MainSystem software update, which must be
run from USB data carrier. You will need:
USB removable storage device (USB stick) with at least 2 GB storage capacity.
A PC or notebook with Windows operating system.
Please note : Before you start, the USB stick must be formatted with FAT 32. (Right-click on the USB memory device in Windows Explorer. Select “Format” > FAT 32 > Start. (!) The ZENEC Z-E3766 restarts several times during the software update and stays off, among other things, for a few seconds (black screen for approx. 10 ~ 15 sec.) before the device restarts. Please do not operate or switch off the device during the update process. After successful installation, the tuner source will come up.
Installation of the main system software update via USB:
The main system software can be found at: www.zenec.com> Support> Software Updates> FIAT> Z-E3766 Link: http://www.zenec.com/support/software-updates/Z-E3766/?lang=en
-
Download the Software Update v1.3.3 “Z-E3766_FEU_v1.3.3.exe”.
-
The software package is a self-unzipping executable. Start extraction with a double-click and select your USB stick as a target for the uncompressed files.
-
You obtain a file called,,swupdate_6538_20211209.zip” in the root directory of the USB stick
-
Connect the USB stick to the Z-E3766 USB-1 connection cable.
Go to the device menu:
Settings > System > Software Update and confirm by tapping on the green hook checkbox. Tap on the green hook checkbox again, in the “Software Update?” pop- up window. -
The update process starts automatically now.
-
The update installs sequentially and the lower part of the display screen informs about the progress. The software installation takes about 4~5 minutes.
Note: After successful installation, device reboot and shows the Tuner source. -
Remove the USB stick.
-
Load factory
Note: After a successful update, the device menu language is in English.
You can set the language to your preference as follows. Go to the device menu:
Setup > System > Load Factory and confi rm by tapping the green hook checkbox.
Tap on the green hook check box again upon the “Load Factory?” prompt by the
pop-up window.
Please do not operate or switch off the device during the restart process
(duration approx. 3 minutes).
After restart, the tuner source OSD will show up.
Note: After the loading factory defaults, some personal settings must be
set again (such as camera grid lines, audio settings, etc.).
Language setting
After the update, the system language is set to English. You can now change
the device language to your preference. Go to the device menu:
Setup > Misc > tap on OSD Language and select your preferred language in the
list. Confirm your language selection by tapping on the green hook checkbox
once more in the pop-up window.
10. Version control After installing the software update a version check
needs to be carried out. In the device menu: Settings > System > Software
Version Information. Version: v1.3.3
If the version differs from the target version, install the update a new.
Improvements and Bugfixes:
MAIN SYSTEM
- Improved system performance
- Already with v1.2.8: Handbrake parking function logic change from previous parking cable usage to GPS-DR data usage.
- NEW: Updated ZENEC IR protocol
- NEW: Added new ZENEC CaraControl (Board Control) software
- NEW: Changed button color default setting from “Amber” to “White” – for new Ducato Series 8 Video: https://www.youtube.com/watch?v=V-TXYh79jM0
APPLE CAR PLAY
- NEW: Improved CarPlay ringtone logic
- NEW: Bugfix for CarPlay doesn`t start playback after TA announcements
- NEW: Bugfix for CarPlay Call doesn`t use an external Microphone
STEERING WHEEL CONNECTION (ANALOG SWC – KEY-1 / KEY-2)
- Already with v1.2.8: Support of the steering wheel remote control of the NEW FIAT Ducato III Series 8 in combination with suitable device hardware. TUNER
- Already with v1.2.6: Bugfix for FM Preset storage issue with local radio freq. that contains a comma
- NEW: Updated local Tuner Slideshow Database to v1.20