ZENEC ZE-RVC85WA Auto Navi Multimedia Car Integration Rear View Camera Instructions
- June 5, 2024
- ZENEC
Table of Contents
ZENEC ZE-RVC85WA Auto Navi Multimedia Car Integration Rear View Camera
PRODUCT OVERVIEW
KEY FEATURES
- Compact “wide angle” universal camera
- Two different housing types, each with two adhesive pads, are included in delivery
- System design allows front- or rear- mounting and use
- Detailed high contrast picture suited for twilight conditions
- Separable 3-part system cable, with cable parts of 0.7 m + 7.0 m + 0.7 m length
- Normal or mirror image picture output selectable
DESCRIPTION:
The ZENEC wide angle cam model ZE-RVC85WA was developed for universal use,
allowing retrofitting of a great variety of vehicles due to its extremely
compact housing shape. The picture can be outputted as normal or mirror image,
for mounting and utilization of this model as front- or as rear view camera.
Besides, the ZE-RVC85WA is a true wide angle cam, offering an enormous
horizon-tal view angle of 190°.
This product is compatible with a wide variety of 2-DIN A/V receivers of the
aftermarket and the ZENEC E>GO product line up, including ZENEC 2-DIN
infotainers and naviceivers.
Technical Specifications:
| Image device: | ¼” / 6.4 mm Aptina ASX340 CMOS sensor |
|---|---|
| Lens focal length: | f1.05 |
| TV system: | NTSC / 60 Hz |
| View angle: | 210°(D) x 190°(H) x 140°(V) |
| Native sensor resolution: | 680 (H) x 512 (V) pixels |
| Resolution of video-out: | > 420 TV lines |
| Frame rate: | 60 fields/sec. |
| Signal to noise ratio: | > 48 dB |
| Light sensitivity: | 0.5 Lux/F1.2/50IRE |
| Video output: | 1.0 Vp-p, 75 ohms CVBS |
| White balance: | Auto |
| Backlight compensation: | Auto |
| Gamma correction: | 0.45 |
| Gain control: | Auto |
| Sync system: | Auto |
| Power supply: | DC 5 – 16V |
| Current consumption: | 60mA (DC12V) / ≤ 720mW |
| IP protection rating: | IP69K |
| Operating temperature: | -30°C~+75°C |
CAUTION:
- Use the included connection cable exclusively. Altering or replacing it will void your warranty.
- The camera is water- and dustproof and has been licensed according to the international standard IP69K. However, vehicle cleaning using high pressure water and steam jet devices may still lead to damage of IP69K rated camera models by water intrusion. Keep a distance of at least one meter between the water nozzle and the camera housing.
lnstall the ZE-RVC85WA in the insert of the license illumination plate. Take
off the panel and drill a Ø 6.5 mm diameter hole.
Assemble the camera as shown in the two explosions drawings:
Left picture = Rear camera Right picture = Front camera
Put the cable through the hole and fasten the camera to the car, using the
adhesive pad.
Important: Use the supplied metal ring only for the rear camera housing.
ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
EU Legal Representative: ACR S & V GmbH ∙ Industriestr. 35 ∙ D-79787
Lauchringen ∙ Germany www.zenec.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>