Nedis DOORB223CWT Doorbell User Manual

: June 5, 2024
: nedis

DOORB223CWT Doorbell

Nedis DOORB223CWT Doorbell

User Manual

Preface

Thank you for purchasing the Nedis DOORB223CWT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The product is intended as a wireless doorbell.

The product consists of a receiver and a transmitter.

The transmitter is powered by a battery and the receiver can be plugged directly into a power outlet.

The doorbell receiver is for indoor use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Wireless doorbell

---|---

Article number

|

DOORB223CWT

Dimensions (d x w x h)

|

Receiver

|

67 x 76 x 109 mm

Transmitter

|

21 x 31 x 80 mm

Battery type

|

CR2032 (lithium)

Frequency

|

433.90 – 433.94 MHz

Volume

|

80 dB @ 0.5 m

Power supply

|

Receiver

|

220 – 240 VAC ; 50 Hz

Transmitter

|

3 VDC

Operating range

|

max 300 m

Main parts (image A)

A

1. Sound only

2. Flashing LED only

3. Sound and flashing LED

4. LED indicator

5. Pairing mode button

6. Choose tune button

7. Volume button

8. Mode

9. Doorbell

10. LED indicator

Safety instructions

WARNING

Only use the product as described in this manual.
Read the manual carefully before use. Keep the manual for future reference.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power source and other equipment if problems occur.
Do not expose the product to water or moisture.
Retain the original product literature for future reference.
Non-rechargeable batteries are not to be recharged.
Do not dismantle, open or shred batteries.
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Do not short-circuit a cell or a battery.
Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
Do not remove a cell or battery from the original packaging until required for use.
Do not subject cells or batteries to mechanical shock.
In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
bserve the plus (+) and minus (–) marks on the cell, battery and equipment and ensure correct use.
Do not use any cell or battery that is not designed for use with the product.
Seek medical advice immediately if a cell or a battery has been swallowed.
Always purchase the battery recommended by the product manufacturer for the product.
Keep cells and batteries clean and dry.
Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
Use only the cell or battery in the application for which it was intended.
When possible, remove the battery from the product when not in use.
Properly dispose of the empty battery.
Do not mix cells of different manufacture, capacity, size or type within a product.
Battery usage by children should be supervised.
Disconnect the power supply before making or breaking the connections to the battery.
Batteries contain explosive gases. Prevent contact with flames and sparks. Provide adequate ventilation during charging.

Safety symbols on the product

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Product in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions such as double insulation or reinforced insulation are provided, there being no provision for protective earthing or reliance upon installation conditions NOTE A Class II products may be provided with means for maintaining the continuity of protective circuits, provided that such means are within the product and are insulated from accessible surfaces according to the requirements of Class II.

|

Indication that the producer of the packaging material complies with the Packaging Law and has contributed to the costs of the ‘Green Dot’ waste separation and recycling system.

|

Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.

|

Indication to explain that the product can be recycled.

|

Indication to explain that the product should be recycled appropriately.

|

Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Insert the receiver into the outlet

Place the battery

Pairing the transmitter and receiver

1. Press A 1 to enter pairing mode.

The receiver starts beeping.

2. Press and hold A 5 until the receiver stops beeping.

The receiver automatically exits pairing mode after 15 seconds of inactivity.

Choosing a tune

1. Press A 2 repeatedly to switch between the available tunes.

Changing the volume

1. Press A 3 to change the volume.

Attach the transmitter outside to the wall

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product DOORB223CWT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/DOORB223CWT #support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands