Nedis DVBS2265BK DVB-S Set Top Box User Manual

June 5, 2024
nedis

DVBS2265BK DVB-S Set Top Box

Nedis DVBS2265BK DVB-S Set Top Box

User Manual

Preface

Thank you for purchasing the Nedis DVBS2265BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

The Nedis DVBS2265BK is a compact, full-featured DVB-S set top box that allows you to receive hundreds of DVB-S TV channels when used with a suitable satellite dish.

Installation, setup, and use of the satellite dish is beyond the scope of this manual. For this, please refer to the manual of your satellite dish .

Intended use

The Nedis DVB-S Set Top Box allows you to view DVB-S Digital Television broadcasts on your TV and is exclusively meant for this purpose.

The product is intended for indoor use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Tuner

|

Frequency range

|

950 – 2150 MHz

---|---|---
|

Input impedance

|

75Ω unbalanced

|

Signal input level

|

-65 ~ -25 dBm

|

Symbol rate

|

2 – 45 Mbps

|

LNB Power

|

13/18 V, max 500 mA

Demodulation

|

Demodulator

|

QPSK/8PSK

|

FEC

|

1/2,2/3,3/4,5/6,7/8,8/9,9/10

Connections

|

LNB IN

|

F connector

|

AV

|

Mini AV socket (CVBS+L/R)

|

HDMI

|

HDMI

|

DC IN 12 V

|

DC 12 V, 1 A mains adapter

|

IR

|

Remote control sensor

|

USB

|

Connect USB 2.0 flash drive

|

RS-232

|

For software upgrade

|

LAN

|

Connect to the internet

Power

|

AC adapter

|

AC 100 – 240 V ~ 50 / 60 Hz

|

Power consumption

|

Max 12 W

Display

|

Standards

|

PAL/NTSC

|

Resolution

|

PAL, NTSC, 720p, 1080i/p, , 480i/p 576i/p

Decoding

|

Aspect Ratio

|

4:3, 16:9

|

Video

|

MPEG1. MPEG2, MPEG4/H.265

|

Audio

|

MPEG1 Layer 1-3, MPEG2, AAC, HEAAC, Right – Left – Stereo

Compliance

|

DVB-S

|

ESI/EN 300421 DVB-T2

Parts list

Front Panel [see image A]

A

1. LED display

|

Channel number indicator.

---|---

2. Change channel button

|

Channel down.

3. Change channel button

|

Channel up.

4. Power button

|

Set Top box on/off switch.

Rear panel [see Image  B ]

B

1. LNB IN

|

Satellite dish cable connection.

---|---

2. USB port

|

USB flash drive connection (record / play video files).

3. HDMI OUT

|

Digital connection (TV or AV-receiver).

4. AV

|

Analogue mini AV socket (CVBS+L/R)

5. RS-232

|

Serial port for firmware upgrade.

6. LAN

|

Ethernet cable connection (home network).

7. DC IN

|

Mains adapter connection.

Remote control [see image  C ]

C

1

|

Switch on or switch to standby mode.

---|---

2

|

Function keys

3

|

Fast Rewind.

4

|

Fast Forward.

5

|

Start or pause playback.

6

|

Stop playing or recording.

7

|

Displays Teletext information.

8

|

Select Subtitle language.

9

|

Open main menu.

10

|

Navigation.

11

|

Navigation.

12

|

Electronic Program Guide.

13

|

Volume+ button

14

|

Volume- button

15

|

Go to a specific time within media playback.

16

|

Mutes and restores audio.

17

|

Skip to previous.

18

|

Skip to next.

19

|

Toggles Repeat in playback mode or Select Satellite.

20

|

Shortcut to Record Manager.

21

|

Selects Audio Mode or Language.

22

|

Switch to the previously viewed channel.

23

|

Shows description of current program.

24

|

Set or confirm.

When not in menus or settings, OK opens the channels list.

25

|

Navigation.

26

|

Navigation.

27

|

Exits current menu or returns to previous menu.

28

|

Channel up.

29

|

Channel down.

30

|

Shows Favorites Menu.

31

|

Record current program.

32

|

Select channel or setting.

33

|

Toggles TV and Radio.

Safety instructions

WARNING

  • Only use the product as described in this manual.
  • Make sure that the product can dissipate its heat.
  • Do not block ventilation openings and make sure that there is enough space around the product.
  • Do not use near radiators, stoves and other heat-producing apparatus, such as amplifiers.
  • Do not use in hot environments.
  • Do not expose the product to direct sunlight, naked flames or heat.
  • Do not expose the product to water or moisture.
  • Do not use liquids on or near the product.
  • Avoid splashing and dripping.
  • Do not attempt to directly connect to a mains power outlet. This will permanently damage the set top box and may result in serious injury or death.
  • Do not use extension cables to connect a flash drive to avoid read/write errors and interference .
  • This product is powered through a polarizing power plug in some markets. Do not use the set top box if the power plug does not fit your mains wall outlet and consult a local electrician.
  • Make sure the electrical cord is out of the way and does not bend near the connections. Do not pinch the cord, do not walk over it and do not place heavy objects onto the cord.
  • This product contains no user-serviceable parts. Do not open the product

Have the product serviced by qualified service personnel when:

  • The product has been damaged in any way, especially the power cord or plug.
  • The product does not operate normally.
  • Liquid has been spilled or objects have fallen into the product.
  • The product has been dropped.
  • Do not use a damaged product.
  • Replace a damaged or defective product immediately.
  • Disconnect the product from the power outlet and other equipment if problems occur.
  • Disconnect the product from the power outlet during lightning storms or before prolonged periods of disuse.
  • Only clean the set top box with a soft clean cloth.
  • Do not use cleaning agents.

Safety symbols on the product

|

This symbol means risk of electric shock when not adhering to the instructions in this manual.

---|---

|

This symbol means that important operating and maintenance instructions are given in this manual.

---|---

|

The product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing, use only identical replacement parts.

---|---

  • Also refer to the information on the bottom of the enclosure for electrical and safety information before installing or operating the product..

Installation

  • Check the contents of the package
  • Check the product for any visible damage. If the product is missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Install the Remote Control

Place batteries [See image D]

|

|

---|---|---

D

  • In order to function correctly
  • The remote control should have line-of-sight with the set top box.
  • Working range is up to 7 meters at an angle of up to 60° [see image E ].
  • Sunlight or other very bright light could interfere with the proper functioning of the remote control.
  • Make sure there is unobstructed line of sight between the sensor and your remote. Keep the sensor clean.

|

---|---

E

Connect the product [see image  F ]

CAUTION

  • Make sure that the voltage of your mains wall outlet matches the voltage required by the adapter.
  • Disconnect all devices from mains before making any connections.
  • Connect power of all your devices last.

F

Set up
  • Turn on the product by pressing  A 4/ C 1.
  • Make sure your TV is switched to the right input channel.

 The first time you switch on the set top box, the Main Menu will appear.

1. Follow the instructions on screen to change the Language and Country/Region and confirm with  C24.

2. Choose the video settings and confirm.

  • This will take you back to the main menu.

3. Use  C11  and  C25  to select the satellite and its properties.

4. Press  C 2 to enter the satellite search menu.

5. the satellite to be searched.

6. Choose which channels to scan for.

  • FTA stands for Free To Air.
  • If you choose No, all channels will be scanned.

7. Choose which type of channels will be scanned.

  • TV and Radio
  • Only TV
  • Only Radio

8. Select scan mode.

  • Blind
  • Full

9. Select “Search” and press  C24.

10. After confirming, a list of available channels is made.

  • You are now ready to watch TV.
  •  All settings you make can be edited by going to the menu with  C 9.
  • Navigate through the menu with C 10,11,25,26.
Favorites

Add favorites to a list:

 1. Switch to the program you wish to add to your favorites list.

2. Press  C30.

  • The Favorites menu is displayed.

3. Press  C24  to confirm.

  • The channel is now added.

  Access a list of favorite channels:

 1. Press  C30.

2. Select the channel you want to view with  C 10,11,25,26.

3. Press  C24  to confirm.

Password
  • For some settings a password is required.
  • The default password is 0000.

Maintenance

  •  Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
  • Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Troubleshooting

Problem

|

Possible cause

|

Solution

---|---|---

No picture

|

No power

|

Connect to mains

|

Standby

|

Press  C 1.

| |

Press  A 4.

“No Signal” message

|

Satellite dish cable disconnected.

|

Connect satellite dish cable  B 1.

No sound

|

Faulty connection

|

Check connections  B 3,4,67

|

Mute is on or volume is down

|

Press  C16  to unmute.

| |

Turn the volume up.

|

Incorrect soundtrack

|

Press  C21  to try another soundtrack

Only sound, no picture

|

Faulty connection

|

Check connections  B 1,3,4

|

Radio program selected

|

Press  C33  to switch to TV.

Remote control does not operate

|

Batteries are not placed or exhausted

|

Insert or change batteries

|

Out of working range

|

Move closer to the set top box and/or reduce the angle

Image stops or mosaics

|

Signal weak

|

Adjust satellite dish.

|

Faulty satellite dish cable connection

|

Check connection  B 1

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals