Nedis HPDB200BK Wireless DAB+ FM Bluetooth Headphones User Manual

: June 5, 2024
: nedis

HPDB200BK Wireless DAB+ FM Bluetooth Headphones

User Manual

Preface

Thank you for purchasing the Nedis HPDB200BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis HPDB200BK is a pair of wireless Over-Ear headphones.

It can receive FM and DAB radio frequencies or connect to an audio source via Bluetooth.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Wireless Headphones | DAB+ / FM / Bluetooth®

---|---

Article number

|

HPDB200BK

Functions

|

DAB+ / FM / Bluetooth®

DAB frequency range

|

169 – 239 MHz

FM frequency range

|

87 – 108 MHz

Bluetooth frequency range

|

2.402 – 2.480 GHz

Bluetooth® version

|

5.0

Maximum Transmission power

|

+4 dBm

Maximum antenna gain

|

0 dBi

Battery type

|

Rechargeable Lithium battery (1200 mAh)

Charging input power

|

5V / 500mA

Charging time

|

±3.5 hours

Playback / talk time

|

Up to 9 hours

Standby time

|

Up to 110 hours

Driver unit

|

Φ 40 mm

Impedance

|

32 Ω

Frequency response

|

20 – 20.000 Hz

Parts list

|

---|---

1. Display

2. Frequency + / skip to next song

3. Frequency – / skip to previous song

4. Menu / Enter button

5. Preset / Save button

6. Audio port (3.5mm)

7. Microphone

8. Micro USB port

9. Status indicator LED

10. Power / Mode button

11. Info / Scan button

12. VOL+ button

13. VOL- button

Safety instructions

WARNING

Only use the product as described in this manual.
Do not expose the product to water or moisture.

Installation

Check the contents of the package
Check that all parts from the parts list are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Use

Charging the headphones

Connect the USB cable to the micro USB port 8.
The status indicator LED 9 on the headphones burns red to indicate the headphones are charging.
The status indicator LED 9 on the headphones turns green when the headphones are fully charged.

Switching on the headphones

Switch on the headphones by pressing q.
The display shows “Welcome to digital radio”.

Switching mode

While the headphones are switched on, repeatedly press q to switch between DAB, FM tuning or Bluetooth mode.
The display shows what mode is currently selected.

DAB mode

In DAB mode, press and hold w to search for available digital radio stations.
The display shows the search progression in percentages.
After the search is finished, all available stations will automatically be saved.
Press 2 or 3 to switch between the saved stations.
Press 4 to confirm.

FM mode

1. In FM mode, press w. The display shows the current frequency.

2. Press and hold w to search for available FM radio stations.

After the search is finished, all available stations will automatically be saved.
Press 2 or 3 to switch between the saved stations.

Bluetooth mode

Pairing the headphones to a Bluetooth audio source

1. While the headphones are switched off, press and hold q to enter pairing mode.

The display shows “BT Connect”.

2. Enable Bluetooth on the device you want to pair the headphones with.

3. Select “ HPDB200BK ” from the list of available Bluetooth devices on your device.

The display shows “Connected”.

If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.

Controlling the volume

Press 12 to increase the volume.
Press 13 to decrease the volume.

Controlling the music

Press 4 to play or pause the music
Press 2 to skip to the next song.
Press 4 to go back to the start of the song. Press again to go to the previous song.

Making phone calls

With the headphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the headphones.
When you receive an incoming phone call, the display shows “Call in” and the phone will ring through the speakers of the headphones.
To answer an incoming call, press 4. The display shows “Calling”.
To reject an incoming call, press and hold 4 for 2 seconds.
To end a call, press 4.
To cancel an outgoing phone call, press 4.
To quickly redial the last called number, double press 4.

Press and hold 4 for 2 seconds to enter the settings menu. Here you can adjust the date and time, the display contrast and brightness or perform a factory reset among other options.

Low battery alarm

When the battery is low, an audbile signal will be given through the speakers and the display will show “Low power”.

Switching off the headphones

Press and hold q for 2 seconds to switch off the headphones.

Wired connection

When the batteries of the headphones are drained, you can still listen to your audio source by connecting the headphones directly to the audio source, using the 3.5mm audio cable.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Troubleshooting

Problem

|

Possible cause

|

Solution

---|---|---

Headphones do not switch on.

|

The batteries are drained.

|

Charge the headphones for at least 30 minutes and retry.

Bluetooth source cannot pair with the headphones.

| |

Remove the headphones from the list of paired devices on the bluetooth source and follow the instructions in chapter “Pairing the headphones to a Bluetooth audio source”.

Restart both devices and try again.

No sound is coming from the headphones.

|

The headphones are not paired to the transmitter.

|

Follow the instructions in chapter “Pairing the headphones to the transmitter”.

|

The transmitter is not connected to the audio source.

|

Follow the instructions in chapter “Connecting the transmitter”.

|

The headphones are too far out of reach from the transmitter.

|

Move the headphones closer to the transmitter.

|

The audio source volume is too low/muted.

|

Raise the volume on the audio source.

|

The headphones volume is too low/muted.

|

Raise the volume on the headphones with the VOL+ button e.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPDB200BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/HPDB200BK#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands