Nedis WIFIPO10FWT Wi-Fi Smart Socket User Manual
- June 5, 2024
- nedis
Table of Contents
WIFIPO10FWT Wi-Fi Smart Socket
User Manual
Preface
Thank you for purchasing the Nedis WIFIPO10FWT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The WIFIPO10FWT is a power outlet that allows you to supply power to your electronic devices in a safe and controlled manner.
The product can be controlled with the Nedis SmartLife app via a Wi-Fi connection from any location.
The product can switch devices on or off instantly or via a timer.
Intended use
The product is exclusively intended for supplying power to electronic devices with a type C (Euro) or F (Schuko) power plug.
The product is intended to be controlled exclusively via the Nedis SmartLife app.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Main parts (image A)
A
1. Cover
2. Casing screws
3. Cable hole
4. Status indicator LED
5. Power outlet
6. Sealing cap
7. Power button / Reset button
Specifications
Product
|
Wi-Fi Smart Socket
---|---
Article number
|
WIFIPO10FWT
Dimensions (l x w x h)
|
70 x 85 x 65 mm
Weight
|
160 g
Power output
|
3680 W
220 – 250 VAC / 16 A
Wireless technology
|
Wi-Fi
Wi-Fi frequency
|
2.4 GHz
Frequency range
|
2412 – 2484 MHz
Max. radio transmit power
|
14 dBm
Network protocol
|
IEEE802.11 b/g/n
Encryption types
|
WEP
TKIP
AES
WPS
Working temperature
|
-30 °C – 60 °C
Protection class
|
IP55
Safety instructions
WARNING
- Only use the product as described in this manual.
- Read the manual carefully before use. Keep the manual for future reference.
- Risk of electric shock. The product should only be opened by an authorized technician when service is required.
- Make sure the power cable is not connected to an electricity supply before connecting it to the product.
- Disconnect the product from the power cable if a problem should occur.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
- Do not drop the product and avoid bumping.
Installation
Installation of the Nedis SmartLife app
1. Download the Nedis SmartLife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis SmartLife app on your phone.
3. Create an account with your mobile phone number or your e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Installation of the product (image B + C)
B
1. Open the cover A 1.
2. Unscrew the casing screws A 2.
C
3. Take the two halves of the casing apart.
- Make sure the power cable is not connected to an electricity supply before connecting it to the product.
4. Cut away rings from the sealing cap A 6 until the hole matches the diameter of the power cable.
5. Slide A 6 over the power cable.
- The maximum diameter of A 6 is 21 mm.
6. Insert the power cable into the cable hole A 3.
7. Push A 6 into A 3
8. Use a small screwdriver or pin to open the holes of C 2.
9. Connect the positive and negative wires of the power cable to C 2
10. Use a small screwdriver or pin to open the holes of C 1.
11. Connect the ground wire of the power cable to C 1.
12. If desired, attach the lower half of the casing to a wall.
13. Reassemble the product.
14. Connect the power cable to an electricity supply.
- The installation can be tested by repeatedly pressing A 7. If the power cable has been successfully connected, the product will switch on and off and make a clicking noise.
Add the product to the SmartLife app
1. In the Nedis SmartLife app, tap + in the top right corner.
2. Under Add Manually , select Smart Plug.
3. if the indicator LED is blinking rapidly. If so, tap to confirm.
4. If A 4 does not blink rapidly, press and hold A 7 for 5 seconds and check again.
5. Confirm the password of the Wi-Fi network to which your phone is connected and tap Confirm. The app will now search for the product.
6. Rename the product after it has been found and added.
If the above connection method fails, the product can be connected using AP mode.
1. In the Nedis SmartLife app, tap + in the top right corner.
2. Under Add Manually , tap Smart Plug.
3. Tap AP Mode in the top right corner.
4. Check if A 4 is blinking slowly. If so, tap to confirm. __
- If A 4 does not blink slowly, press and hold A 7 for 5 seconds and check again.
5. Confirm the password of the Wi-Fi network to which your phone is connected and tap Confirm.
- 6. Connect your phone to the product’s Wi-Fi hotspot (SmartLife_XXXX) and return to the app. The product will now connect to the selected Wi-Fi network.
7. Rename the product after it has been found and added.
Use (image D)
- The product can be controlled from any location via the Nedis SmartLife app
- The home screen of the app shows a control tile for each connected product and/or group.
D
1. Tap the control tile to access the controls of the product.
2. Tap D 1 to switch the product on or off.
3. Tap D 2 to set an activity schedule.
4. Tap D 3 to set a countdown after which the product will switch on or off.
5. Tap D 4 to access the detailed settings of the product (or group).
- The product can be connected to Google Home or Amazon Alexa to enable speech control. See the detailed settings D 4 of the product (or group) for more information.
- The product can be connected to IFTTT to enable external conditions to trigger the product. See the detailed settings D 4 of the product (or group) for more information.
See our support webpage to discover all possibilities of the Nedis ® Wi-Fi Smart Socket.
Maintenance
- Clean the outside of the product with a soft, clean, lightly damp cloth.
WARNING
- Do not clean the inside of the device.
- Do not use cleaning solvents or abrasives.
- Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFIPO10FWT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and safety datasheet if applicable) can be found and downloaded at http://webshop.nedis.com.
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>