Nedis SPBT1003BK Bluetooth Speaker User Manual

: June 5, 2024
: nedis

SPBT1003BK Bluetooth Speaker

Nedis SPBT1003BK Bluetooth Speaker

User Manual

Preface

Thank you for purchasing the Nedis SPBT1003BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis SPBT1003BK is a Bluetooth speaker which plays audio from your media device.

The product is exclusively intended for playing music from a Bluetooth device.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Bluetooth® Speaker

---|---

Article number

|

SPBT1003BK

Power input

|

5.0 VDC , 1.0 A

Bluetooth® version

|

4.2

Bluetooth® frequency range

|

2402 – 2480 MHz

Maximum transmission power

|

4 dBm

Frequency response

|

100 Hz – 18 KHz

Battery type

|

Lithium-ion

Battery capacity

|

1500 mAh

Maximum battery play time (at 50% volume)

|

Up to 13 hours

Maximum charging time

|

Up to 2 hours

Speaker RMS

|

1.7 W

Speaker peak power

|

5.1 W

Sensitivity

|

70 dB

Driver diameter

|

76 mm

Impedance

|

3 Ω

LED light

|

Yes

Connection input

|

Aux input, micro USB

Main parts (image A)

A

1. Light

2. AUX port

3. Status indicator LED

4. Micro USB port

5. Light button

6. Power switch

7. Micro USB cable

8. AUX cable

Safety instructions

WARNING

|

To prevent possible hearing damage, do not listen at high volume levels for long periods.

---|---

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.
Charge the battery for at least 2 hours when you use it for the first time.
Only use the provided USB charging cable.
Do not overcharge the battery.
Do not immerse the product in water.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Disconnect the product from the power source and other equipment if problems occur.
Do not leave the battery on prolonged charge when not in use.
After extended periods of storage, it may be necessary to charge and discharged the cells or batteries several times to obtain maximum performance.
During charging the product must be placed in a well-ventilated area.
Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.

Explanation of the safety symbols on the product

|

Indication to explain that the product can cause hearing damage. Do not listen at high volume levels for long periods.

---|---

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Charging the product

1. Plug the micro USB cable A 7 into the micro USB port A 4.

2. Plug the other end of A 7 into a computer or power adapter.

3. Plug the power adapter into a power outlet.

The charging indicator LED A 3 burns red to indicate the product is charging.
A 3 switches off when the battery is fully charged.

Switching on the product

Use A 6 to switch the product on or off.

Pairing the product to Bluetooth audio source

After switching on the product, A 3 blinks blue and the product emits a tone to indicate pairing mode is active.
The product reconnects to any nearby, previously paired devices that are switched on.

1. Enable Bluetooth on the device you want to pair the speakers with.

2. Select “ SPBT1003BK ” from the list of available Bluetooth devices on your device.

When paired successful, A 3 blinks blue slowly and the product emits a tone.

Wired connection

1. Plug the AUX cable A 8 into the AUX port A 2.

2. Plug the other end of the AUX cable into an AUX output of your audio source.

Use

Controlling the music

Use your audio source to control the audio volume and playback.

Light modes

Press light button A 5 to cycle through the different light modes.

Overview of the light modes

1. RGB cycling colours

2. Solid red

3. Pulsing red

4. Solid green

5. Pulsing green

6. Solid blue

7. Pulsing blue

8. Random RGB colours

9. No lights

Maintenance

Before cleaning and maintenance, switch off the product and disconnect the power.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.
Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product SPBT1003BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/SPBT1003BK#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands