Serial 1 RUSHCTY Speed Pearl Midnight Black Large Electric Bike Owner’s Manual

Serial 1 RUSHCTY Speed Pearl Midnight Black Large Electric Bike

YOUR OWNER’S MANUAL

Enjoy The Ride
From the whole Serial 1 Cycle Company crew, we thank you for embarking on your next riding journey with us! When enjoying your Serial 1 eBicycle, be sure to ride safely, respectfully, and within the limits of the law. Always wear a helmet, proper eyewear, and protective clothing. Never ride while under the influence of alcohol or drugs. Know your Serial 1 eBicycle and read and understand your owner’s manual from cover to cover.
This manual has been prepared to acquaint you with the operation, care, and maintenance of your eBicycle and to provide you with important safety information. Follow these instructions carefully for your personal cycling safety and pleasure. Your owner’s manual contains instructions for operation and minor maintenance. We recommend that any maintenance or major repairs, which may require special skills and tools, should be performed by a competent professional. Please contact Serial 1 for more information on obtaining service.
NOTE
Read this manual in its entirety before your first ride. Make sure you understand all sections and issues. Not all eBicycles have all the features described in this manual. Contact Serial 1 if you have questions about the features of your eBicycle.

SAFETY DEFINTIONS

Take special notice of sections with the following headings:
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTE
Refers to additional important information about the given subject. 

**Safety Symbols

**

The following graphic symbols indicate potential safety hazards and avoidance actions to prevent a hazardous situation. The graphical symbols may be present in manuals, instructions, on the eBicycle, and/or parts & accessory product labels.
Hazard Symbols
A triangle represents a hazard symbol, alerting to a safety hazard.

| General hazard warning.
---|---
| Electric shock hazard.
| Flammable material hazard.
| Explosive material hazard.
---|---
| Hot surface hazard.

Prohibition Symbols
A circle with a line represents a prohibition symbol, indicating a situation to avoid which otherwise may lead to a hazard, personal injury, and/or property damage.

| General prohibition sign to signify a prohibited action.
---|---
| Keep away from open flame. Avoid smoking, flames, or sparks.

Action Symbols
A circle represents an action to take in order to avoid a potential hazard.

| Refer to appropriate manual or instructions.
---|---

SAFE OPERATION

Local Safety Regulations

• Your Serial 1 eBicycle conforms to all safety standards and regulations effective on the date of manufacture.
• Know and respect the rules of the road. It is your responsibility to comply with the laws and regulations of the areas where you ride. Read the safety information that is provided by your national, regional, or local traffic authority. Make sure all equipment required by law is installed and/or utilized and in good operating condition.
• In most countries, regulations for the use of an eBicycle are the same as those for a standard bicycle. However, there may be local differences such as where you can ride, minimum rider age, or required equipment and registration. It is the rider’s responsibility to know and obey local eBicycle regulations.

General Safety

WARNING

• eBicycles are different than bicycles. They operate and handle differently. Unskilled or improper use could result in loss of control, death, or serious injury.
• Always wear a helmet, appropriate to the type of riding you will be doing, when riding your eBicycle.
• Keep body parts and other objects away from the moving belt or chain, turning pedals and cranks, and spinning wheels of your eBicycle. It is possible that entrapment may occur during normal use or maintenance.
• Never tow a person or item (including a trailer) or allow the eBicycle to be towed.

Safe Operation
Before operating your new eBicycle, it is your responsibility to read and follow the operating and maintenance instructions in this manual and follow these rules for your personal safety.
WARNING

• Striking an object, such as a curb or pothole, can cause internal tire and/or rim damage. If an object is struck, have the tire and rim inspected immediately by a trained professional. A damaged wheel can fail while riding and adversely affect stability and handling, which could result in death or serious injury.
• Always pay strict attention to road surfaces and wind conditions and keep both hands on the handlebar grips when riding. Any two wheeled vehicle may be subject to upsetting forces such as wind blasts from passing vehicles, holes in the pavement, rough road surfaces, rider control error, etc. These forces may influence the handling characteristics of your eBicycle. If this happens, reduce speed and guide the eBicycle with a relaxed grip to a controlled condition. Do not brake abruptly or force the handlebar. This may aggravate an unstable condition.

Brake Safety

WARNING
Apply front and rear brakes evenly. Favoring one brake accelerates wear and reduces braking efficiency. Operation with excessively worn brakes can lead to brake failure, which could result in death or serious injury.

Battery Safety

WARNING

• This vehicle contains a rechargeable battery. An improperly handled or damaged battery can cause electrical shock and/or fire, which could result in death or serious injury.
• Do not disassemble, short-circuit, or use battery in any way other than its intended purpose.
• Do not connect to charger if battery is cracked or damaged due to impacts, falls, and other compromises to the integrity of the case or its contents.
• Do not immerse battery in fluids such as water or acid.
• Keep away from fire. Improper charging, impact, or exposure to fire can damage the battery.
• Use only the lithium-ion battery and charger specified by the manufacturer. Charge the battery within operating temperature range of 32° to 113° F [0° to 45° C]. Charge the battery before use if unused for more than one month.
• A damaged battery can leak electrolyte. Contact with electrolyte can cause serious chemical burns or blindness. If electrolyte comes in contact with eyes, skin, or clothing rinse affected area with clean water and seek medical attention immediately.

Wet Weather Riding

WARNING
When riding on wet roads, brake efficiency and traction are greatly reduced, resulting in increased braking distances. Failure to use care when braking, accelerating, or turning on wet roads can cause loss of control, which could result in death or serious injury. |
Rider Visibility
Riding an eBicycle at night or in other poor visibility conditions is more dangerous than riding during the day. A bicyclist can be difficult for motorists and pedestrians to see. If you are going to ride in those conditions, consult a qualified service provider about equipment that improves your ability to see and be seen by others. Find qualified service providers at www.Serial1.com.
WARNING

• The Consumer Product Safety Commission requires eBicycles to be equipped with front, rear, pedal, and side reflectors. Be sure reflectors are properly mounted. Poor visibility of rider to motorists can result in death or serious injury.
• eBicycle reflectors are designed to reflect vehicle lights and streetlights to help be seen and recognized as a moving bicyclist.
• Check reflectors and mounting brackets regularly to make sure that they are clean, straight, unbroken, and securely mounted. Replace damaged reflectors and straighten or tighten any that are bent or loose.
• When riding under conditions of poor visibility, check and be sure you comply with all local laws about night riding, and take these additional precautions:
  • Wear light colored, reflective clothing and accessories, such as a reflective vest, reflective arm and leg bands, reflective stripes on your helmet, or flashing lights attached to your body and/or your eBicycle.
  • Verify clothing or anything you may be carrying on the eBicycle does not obstruct a reflector or lamp.

Use Conditions
Your eBicycle has a frame sticker that indicates its use condition. Ride only in the use condition specified for your bicycle type.
/CTY eBicycles are designed for Use
Condition 1: suitable for road riding only. /CTY eBicycles are designed for riding on a paved surface where the tires do not lose ground contact.
WARNING

• Serial 1 eBicycles are designed to perform under specific use conditions. Operating the eBicycle under conditions outside of or beyond the specified use conditions can result in a crash which could cause death or serious injury.
• Do not use this eBicycle for off road riding. It is not designed for this type of riding.
• Do not use this eBicycle for extreme, stunt, or competition riding. It is not designed for this type of riding.

Parts & Accessories

If there is a conflict between the information in this manual and information provided by a component manufacturer, always follow the component manufacturer’s instruction.

IN THE BOX

Your eBicycle box is provided with the following contents:

• Serial 1 owner’s manual

• eBicycle frame (assembled)

• Battery

• Fork

• Handlebars

• Rear wheel

• Rear fender/rack (RUSH/CTY models only)
  

• Front fender and rack hardware (RUSH/CTY models only)
  

• Front wheel

• Saddle/Seat post

Small Parts Box

• – Torque tool
  

• Multi-tool

• Keys

• Bell

• Pedals
  

• Battery charger and adapter
  

• Reflectors (front/rear, EU spoke, and US spoke shown)
  

• Side stand
  

Associated fasteners
NOTE
The preceding images are representational illustrations only. The actual components provided may differ slightly.

SPECIFICATIONS

NOTE

• Specifications in this publication may not match those of official certification in some markets due to timing of publication printing, variance in testing methods, and/or eBicycle differences. Customers seeking officially recognized regulatory specifications for their eBicycle should refer to certification documents posted at www.Serial1.com.
• Serial 1 reserves the right to change specifications, equipment, or designs at any time without notice and without incurring obligation.
• The A-weighted emission sound pressure level at the driver ears is less than 70 dB(A).

Specified Tires

Model| Size| Rec. Tire Pressure|

Max Pressure

---|---|---|---
MOSH/CTY| 27.5 x 2.8| 30 PSI [2.1 Bar]| 45 PSI
[3.1 Bar]
RUSH/CTY| 27.5 x 2.4| 55 PSI
[3.8 Bar]

eBicycle Weights

[22.2 kg]
RUSH /CTY| 58.0 lb [26.3 kg]| 58.5 lb [26.5 kg]| 59.0 lb [26.7 kg]| 59.4 lb [26.9 kg]
RUSH /CTY
Step-Thru| 59.0 lb [26.7 kg]| 59.5 lb [27.0 kg]| 60.0 lb [27.2 kg]|
RUSH /CTY
Speed| 58.0 lb [26.3 kg]| 58.5 lb [26.5 kg]| 59.0 lb [26.7 kg]| 59.4 lb [26.9 kg]

UNBOXING

Preparation

• You will need adequate room to move around the box. We recommend at least 8 x 4 ft [2 x 1 m] of space.
• Do not cut through the box. We recommend that you save your box for at least 14 days in case of the need to return.
• Do not remove any of the protective paper from the eBicycle frame until you are done with the assembly.
  NOTE
  You can follow along with our unboxing and assembly videos at www.Serial1.com.

Unboxing Steps

1. Cut and discard straps

2. Lift the outer box and set aside
   

3. Remove the owner’s manual and read through it fully

4. Check for all main components according to the IN THE BOX section of this manual

5. Remove foam, saddle, and seat post and set aside, and cut and discard any zip-ties
   

6. Remove top tray, front wheel box, small parts box, and front box (if applicable) and set aside
   

7. Check the contents of the small parts box according to the IN THE BOX section of this manual

ASSEMBLY

NOTE
We have designed your eBicycle to be assembled safely and with high quality by an individual at home. However, if you decide you would instead like some help with the assembly process, please contact a qualified service provider or contact us at www.Serial1.com.

Assembly Steps

1. Remove the battery
   

2. Lift front of bike to remove tray from under front axle
   

3. Pull the two perforated edges of the tray down

   • The front edge will remove completely, while the rear will remain attached

4. Install tray in center notches of lower box and rest the bike, elevated, on the tray

   • The black stamped arrow on the tray points toward the front wheel when installed correctly
     

5. Install front fender (RUSH/CTY models only)
   

   • Attach to fork in center hole and tighten to 6.5 Nm using torque tool. The small rubber washer should be between fender and fork. The shortest of the three screws is for the top fender hole, while the two longer screws are for the side forks
     

   • Attach both rack supports to forks, making sure the rack support arm is routed between the fork and the brake line and tighten to 6.5 Nm using torque tool
     

6. Install front wheel

   • Remove front axle

   • Remove plastic spacer from brake caliper. Avoid applying brakes without a wheel installed

   • Fold down front end of lower box tray

   • Fit brake rotor into caliper
     

   • Align and insert axle through fork and wheel

   • Tighten to 11 Nm using torque tool
     

7. Remove any remaining ties between eBicycle and packaging

8. Lift bike, remove tray, and roll bike out of box
   

9. Install side stand

   • Tighten to 9 Nm using torque tool

10. Install pedals

    • The end of each pedal is marked with either an “L” or “R”, indicating the side of the bike as seen by the rider when seated on the bike.

    • The Left pedal has 3 lines on the pedal spindle. The Right pedal spindle is smooth.

    • The Left pedal is reverse threaded, or left-hand threaded.

    • Tighten using multi-tool. Finalize tightening with a pedal wrench (not supplied) to 35Nm

11. Install seat post

    • Loosen clamp screw using multi-tool

    • Insert seat post to desired height (see FIT section for additional direction)

    • Tighten to 6 Nm using torque tool

12. Install bell

    • Disassemble using multi-tool
      

    • Wrap inner sleeve around handlebar to the right of the right brake handle
      

    • Wrap bell around inner sleeve, tighten screw using multi-tool

13. Install post reflectors

    • Wrap the front post reflector (white) around the handlebar to the right of the headlamp. Tighten screw using multi-tool.

    • Wrap the rear post reflector (red) around the seat post below the saddle. Tighten screw using multi-tool.
      

14. Install spoke reflectors (Method 1)

    • Fit the circular center of the reflector around a spoke

    • Screw a circular locking nut into the slot, tightening using multi-tool
      

15. Install spoke reflectors (Method 2)

    • Wrap a plastic clamp around a spoke
      

    • Fit clamp to the end of a reflector

    • Screw the pieces together, tightening using multi-tool

Torque Specifications

Always tighten fasteners to the correct torque to ensure the integrity of the eBicycle. In case of a conflict between this manual and information provided by a component manufacturer, consult with Serial 1 or the component’s customer service representatives for clarification.

Torque Values

inserting axle

FIT

Verify your eBicycle is the correct size. Correct fit is essential for a safe and pleasant ride.
Stand over Height
Stand over height is the basic element of eBicycle fit. It is the distance from the ground to the middle of the top tube.
Step-Over Frame
When straddling the top tube of a Step-Over style bike, you should have 1 – 2 in [2.5 – 5 cm] of clearance between yourself and the bike.
Step-Thru Frame
Stand over height does not apply to eBicycles with step-thru frames. Instead, the limiting dimension is determined by saddle height range.

Saddle Position

To get the most performance and comfort from your eBicycle, correct saddle adjustment is important. If the saddle position is not comfortable for you, adjust the saddle or seat post or see a qualified service provider.
The saddle can be adjusted in three directions:

• Up and down
• Front and back
• Saddle angle

Adjust your saddle position without exceeding the limits set by the height of the top of the seat tube and the “minimum insertion” or “maximum extension” mark on the seat post.

1. While standing next to your eBicycle, loosen the seat clamp with the multi-tool and raise your saddle to the height of your hip bone. Re-tighten the seat clamp with the torque tool to 6 Nm.
2. Sit on your bike and bring the pedals / crank arms perpendicular to the ground. Your leg should be locked straight and your knee fully locked. If it is not, get off the bike and slowly increase the height of the saddle, repeating as necessary until the correct position is attained.
   

Handlebar Height
The eBicycle is equipped with a “thread less” stem and is not height adjustable.~

CHARGING THE BATTERY

WARNING

• Only use the provided charger to charge the battery. The charger is specifically designed to work with this battery and terminals. The use of any other charger can cause damage to the battery and/or injury to the user.
• Your eBicycle will be delivered to you with the battery installed, with a State of Charge (SOC) less than 30%. It is recommended that you charge your new eBicycle battery fully after initial assembly and before every future ride.
• The battery may be charged in or out of the eBicycle. Battery status indicator lights will indicate battery level while charging. Disconnect charger when status lights indicate battery is fully charged.
• Always unplug a battery after it has completed its charging cycle.

Installed in eBicycle

1. Locate the charging port on the lower left-hand side of the motor cover.

2. Open the cover on the charging port. Be careful not to tear or pull off the cover.
   

3. Plug the charger into a wall outlet.

4. Check that the charger plug and the port are free from dirt and debris. Insert the charger plug into the charging port.

5.  The LED indicator on the battery charger will turn solid green when the battery is fully charged. Once fully charged, disconnect the charger from the battery and the outlet.

6. Ensure that you securely close the charge port cover.
   NOTE
   The handlebar display cannot be turned on while the battery is charging.

Removed from eBicycle

1. Remove the battery from the eBicycle.

2. Place the battery in a dry, well-ventilated area near the battery charger.

3. Connect the battery adapter cord to the main charger cord.

4. Plug the charger into a wall outlet.

5. Insert the adapter cord into the charging port on the battery.

6. The LED indicator on the battery charger will turn solid green when the battery is fully charged. Once fully charged, disconnect the charger from the battery and the outlet.

USB POWER

Model Year 2022 eBicycles come with a USB-C plug adapter secured directly below the headlamp.

The USB plug can provide power to a mobile device such as a cellphone. The maximum power level of 10W is supplied by the internal eBicycle battery. If the battery is not installed or is depleted the USB plug will not provide power.

DRIVETRAIN

Drive Motor

The drive motor is mid-mounted with placement near the pedal crank assembly. An electronic torque sensor automatically recognizes the pressure the rider applies to the pedals and instantly provides a proportionate amount of electric drive assistance.

Belt Drive

The drive motor is connected to the rear wheel assembly with a carbon fiber- reinforced drive belt (similar to motorcycle drive belts). The drive belt provides smooth, quiet, and low-maintenance operation.

Continuously Variable Transmission

Your eBicycle may come equipped with an electronically controlled CVT (Continuously Variable Transmission) on the rear hub that delivers seamless gear changes and transmission of power at any speed. There is no shifting required; the transmission automatically adjusts the gear ratio as terrain or speed changes. The transmission is fully enclosed without any exposed components and requires no maintenance.

DISPLAY

• Every eBicycle includes a display attached to the left handlebar. The display directly controls the eBicycle when utilizing the battery powered components. It will not function without battery power but is not needed to use the eBicycle as a traditional bicycle under pedal power only.
• Ergonomically arranged thumb-and-forefinger controls on all models allow the rider to operate the displays without lifting a hand off of the handlebar.
• The Power button is located on the back side of the display. To turn the bike on or off, press and hold the Power button for at least 1 second before releasing.

“All round” Display

RUSH/CTY models utilize a Brose
“All round” display with a 1.5 in [37 mm] TFT screen. The screen can show at least the selected ride mode, current speed, odometer/trip meter, battery charge level, and headlamp on/off status.

“Remote” Display

MOSH/CTY models utilize a Brose
“Remote” display with an LED indicator. The LED indicator can show the selected ride mode, battery charge level, and headlamp on/off status.

RIDE MODES

Serial 1 eBicycles by default have 4 selectable Ride Modes, a Walk Assist, and an Off Mode. The current selectable ride mode will be indicated on the display (either screen or LED indicator).

Eco Mode

Best used in flat-and-favorable conditions when you want just a gentle amount of assistance without unnecessarily depleting the battery.

Tour Mode

Best used when you desire a consistent-but-still-transparent level of electric assistance, for the optimal blend of assistance and battery economy under mixed riding conditions.

Sport Mode

Best used when you want pronounced assistance away from corners or over rolling hills, or to ride further or faster than you would under your own power alone.

Boost Mode

Best used when confronting a steep hill, a strong headwind, or any other condition where you might require a sustained boost of substantial assistance.

Walk Assist

A push-button “walk-assist” function which provides a low level of forward motion to help easily maneuver the eBicycle at walking speeds, especially when there is a need to push the eBicycle up a hill

Off

Ride Modes can be turned to an Off position, which will provide no additional pedal assist. However, lighting and the display will still be active if the battery has charge.

LIGHTING

Your eBicycle features integrated lighting for safety and convenience.

• The LED front headtube badge lighting (“Signature Light”) and the rear taillamp are illuminated any time the eBicycle is turned on.
• A button on the display illuminates the LED headlamp.
• The rear brake lamp automatically illuminates upon deceleration.
• If the eBicycle is laid on its side (either purposefully or accidentally) while powered on, the rear lights will flash an SOS to alert passerby.

BRAKE OPERATION

The front brake lever controls the front wheel brake and is located on the left handlebar. Operate the lever with the fingers of the left hand. The rear brake lever controls the rear wheel brake and is located on the right handlebar. Operate the brake lever with the fingers of the right hand.
NOTE
The direction of brake operation may be reversed if your country requires a different configuration (for example, the United Kingdom).

STORAGE

A storage compartment in the RUSH/CTY model downtube provides a place to stow small items. Insert key and turn clockwise to open.
CARGO RACK

Cargo racks on RUSH/CTY models provide a convenient way to carry small loads.
CAUTION

• Do not carry passengers, including children in child carriers, or use rack(s) as a seat.
• Do not exceed maximum weight limits.
• Use an elastic cord or another suitable retaining device to secure cargo to rack.

Maximum Weight Limits

**Front Rack**

| **Rear Rack**| **Rider and Luggage Max Weight**| **Total Max Weight**
---|---|---|---
22 lb [10 kg]| 22 lb [10 kg]| 220 lb [100 kg]|

280 lb [128 kg]

MAINTENANCE & SERVICE

For all service concerns or questions, please visit our Help Center at www.Serial1.com for additional support or to contact our Support team directly.
WARNING
Always remove the battery prior to performing any maintenance or service.
Services should be performed by a certified bike technician, unless you have the proper tools, service data, and are mechanically qualified. Find qualified service providers at www.Serial1.com.
CAUTION
Replace safety-critical components with genuine replacement parts. Using parts or accessories not approved by Serial 1 can adversely affect performance, stability, or handling, which could result in death or serious injury.
NOTE

• The use of parts and service procedures other than Serial 1 approved parts and service procedures or performing any work that may be deemed as “tampering” may void the limited warranty.
• Tampering is defined as “purposefully removing or replacing the internals or externals of your eBicycle or components in a way that may alter the original design or function.”

Battery Maintenance

The battery is designed only to work with a Serial 1 eBicycle. Use of the battery for any other purpose will void the warranty and can cause harm to property and people. There is no special maintenance required for a Serial 1 eBicycle battery.
CAUTION

• Handle the battery with care. Do not drop or impact the battery. Mishandling the battery could lead to severe damage or over-heating. In rare cases, a mishandled or severely impacted battery could potentially catch fire. If you suspect damage to your battery, contact Serial 1 immediately.
• Batteries are water-resistant for normal storage and riding conditions but are not to be fully submerged.
• Store the battery in less than 80% relative humidity and within a temperature range of 14°F to 113°F [-10°C to 45°C].
• If a battery will sit idle for longer than 3 months, it should be fully charged prior to storage and again after every subsequent 3 months in storage.
• Discontinue use of a battery that has damage due to impacts, falls, or other compromises to the integrity of the case or its contents.

Drivetrain Maintenance

The carbon drive belt on the Serial 1 eBicycle only requires occasional tensioning, as outlined in the Regular Service Intervals.
Drive Belt Tension

Lubrication
Use a general lubricant on the following items:

• Side stand

NOTE
Avoid getting any lubricant on the brake rotors.

Brake Maintenance

Your Serial 1 eBicycle is equipped with hydraulic disc brakes. Hydraulic brakes are self-adjusting and provide ease of use and control.
WARNING
Brakes are a critical safety component. Improperly serviced brakes can adversely affect brake performance, which could result in death or serious injury.
If your hydraulic disc brakes require service (line bleeding, caliper adjustment, or pad replacement) we recommend contacting a qualified service provider. Find qualified service providers at www.Serial1.com.
Brake Sizing

Model| Piston- Calipers| Rotor Thickness| Rotor Diameter
---|---|---|---
MOSH/CTY| 2| 1.8 mm| 203 mm
RUSH/CTY| 4| 2.3 mm| 203 mm

Transportation

• Remove the battery from the eBicycle and store elsewhere in the vehicle while transporting the eBicycle.
• Always respect local laws about transportation of an eBicycle.
• Because Li-Ion batteries of this size and power are considered “dangerous goods, class 9” when transporting, regulations may restrict the transport of separate Li-Ion batteries in some places. The restrictions apply to most airlines and some trucking companies. If you intend to ship or travel with your eBicycle (with battery installed), check with local regulations and the airline or carrier beforehand.

CAUTION
An eBicycle is heavier than a normal bicycle. If transporting on a vehicle, be aware of the maximum load capacity of the vehicle’s roof, towing hook, and/or the eBicycle carrier. Refer to the vehicle manufacturer’s manuals for details.

Cleaning

Wipe the external surfaces of your eBicycle with a damp cloth.
CAUTION
Do not use a pressure washer to clean your eBicycle. Using a pressure washer can result in equipment damage.
Lamp Service
All lamps are sealed units, without access to individual light bulbs. Service on a lamp requires the entire lamp unit to be replaced.

Regular Service Intervals

Service must be performed at specified intervals to keep your eBicycle operating at peak performance.
NOTE

• Perform maintenance more frequently in severe riding conditions such as extreme temperatures, dusty environments, rough roads, long storage conditions, short runs, or heavy stop & go traffic.
• Perform spoke tension check at every 10 hours or after a hard ride over rough roads.
• Regular maintenance needs to continue for the entire time the eBicycle is owned.

CAUTION
As with all mechanical components subjected to wear and stresses, fatigue will occur. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injury or damage. Regular servicing can help identify potential issues. The following table is a minimum recommendation.

Minimum Service Intervals

Rec. Service (repeated at every interval)| Each ride| 1 mo.| 6 mo.| 12 mo.
---|---|---|---|---
0 mi [0 km]| 250 mi [400 km]| 1500 mi [2400 km]| 3000 mi [4800 km]
Check tire pressure and tread, wheel rims for damage| X| X| X| X
Charge battery fully| X| X| X| X
Check brake functionality| X| X| X| X
Check lamp and reflector functionality| X| X| X| X
Check bell functionality| X| X| X| X
Verify handlebars and fork/front wheel turn| X| X| X| X

Rec. Service (repeated at every interval)

| Each ride| 1 mo.| 6 mo.| 12 mo.
---|---|---|---|---
0 mi [0 km]| 250 mi [400 km]| 1500 mi [240 km]| 3000 mi [4800 km]
Inspect brake pads and discs for wear and alignment| | X| X| X
Check wheel spoke tightness| | X| X| X
Check handlebar clamp fastener screw torque| | X| X| X
Check axle nut torque| | X| X| X
Inspect and lubricate kick stand and pedals| | X| X| X
Rec. Service (repeated at every interval)| Each ride| 1 mo.| 6 mo.| 12 mo.
---|---|---|---|---
0 mi [0 km]| 250 mi [400 km]| 1500 mi [2400 km| 3000 mi [4800 km]
Inspect frame for cracks, breaks, nicks, failed welds| | ****

X

| X| X
Road test to verify system functions| | X| X| X
Check sprocket alignment and belt tension| | | X| X
Inspect brakes for leaks or damage| | | | X
True wheels| | | | X
Check and adjust all bike bolt torque values| | | | X

PRIVACY POLICY

CAUTION
This bike should be used only by riders who have been provided all bike documentation and instructions, including descriptions of its built-in connectivity and cellular communication functions, and the features of the Serial 1 Mobile App as described at www.Serial1.com.

WARRANTY & RETURNS

Our most up-to-date Warranty and Returns policies are posted on our website at www.Serial1.com. We encourage every customer to register their warranty at that site.

DECLARATION OF CONFORMITY

Our Serial 1 eBicycles and all language translations of our owner’s manual comply with and meet the requirements laid out in the following standards. This is not an all encompassing list:

• EN 15194:2017
• EN ISO 4210-2
• Machinery Directive 2006/42/EC
• CFR 1512

Our most up-to-date Declarations of Conformity are posted on our website at www.Serial1.com.
SERIAL 1 TRADEMARKINFORMATION
MOSH/CTY, RUSH/CTY, and Serial 1 are among the trademarks of Serial 1 Cycle Company.
PATENTS
Serial 1 products are covered by one or more United States and international patents or pending patent applications.
COPYRIGHT
ALL RIGHTS RESERVED.
©2022 Serial 1 Cycle Company
3451 N Triumph Blvd
Suite 100
Lehi, UT 84043
United States of America
DOCUMENT NUMBER
94000888 Revision E
The English version of this printed owner’s manual is the “Original Instruction” version and was last revised on April 1, 2022
(2022-04-01).

References

• P65Warnings.ca.gov
• Serial 1 Cycle Company | Powered by Harley-Davidson | eBicycles
• US Privacy Policy – Serial 1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>