SoundExtreme SEI-SETXAUD Wireless Audio Remote User Guide
- May 15, 2024
- SoundExtreme
Table of Contents
- SoundExtreme SEI-SETXAUD Wireless Audio Remote
- User Guide
- Features
- Switch Overview
- Connectors
- Installation and Wiring
- Audio Functions
- Dimensions
- Important Legal Information
- CARE, MAINTENANCE & PRECAUTIONS
- LIMITED MANUFACTURER’S WARRANTY
- What’s in the Box
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SoundExtreme SEI-SETXAUD Wireless Audio Remote
Specifications
- Model: SEI-SETXAUD
- Power Inputs: +12V Wire (Red)/ GND Wire (Black)
- Remote Turn-On Output Wire (Dark Blue)
- Maximum Current: 20A, 12V
Product Information
The Audio Rocker Switch Remote Control, model SEI-SETXAUD, is designed to
provide control over SoundExtreme products in your vehicle. It features
various buttons for power control, audio mode selection, play/pause functions,
volume adjustments, and scene settings.
Switch Overview
The switch layout includes power button, play/pause and tracking buttons,
audio mode button, scenes button, and volume buttons.
Button Functions
- Power Button: Press and hold for 3 seconds to turn the switch on or off. Short-press to toggle button backlights. Double-click to pair with a SoundExtreme product.
- Audio Mode Button: Used to switch between different audio modes.
- Play/Pause and Tracking Buttons: Functions vary based on the mode of the paired SoundExtreme product.
- Volume Buttons: Adjust the volume levels.
Frequently Asked Questions (FAQ):
-
Q: How do I pair the switch with a SoundExtreme product?
A: Double-click the power button while the switch is on to enable RF remote pairing with a SoundExtreme product. -
Q: What is the function of the Audio Mode Button?
A: The Audio Mode Button allows you to switch between different audio modes supported by the paired SoundExtreme product.
User Guide
Important
- Please read this User Guide before installation and use.
- CAUTION: The power input voltage range for your Audio
- Rocker Switch Remote Control (referred to as Switch} is 9V to 16V. It is designed to work with a +12V DC battery power supply.
- If your vehicle battery power output is not 12V (e.g., 24 V, 36V, or 48V), you will need a voltage converter with 12V output (e.g., a 48V-to-12V converter). Connecting the Switch directly to higher voltages will cause damage to your device and VOID THE PRODUCT WARRANTY.
- The Switch is capable of handling switching power with current loads up to 20A at 12VDC. Don’t connect it to a device with operating current exceeding 20A.
- The Switch has a Remote Turn-On Output feature; this is an optional connection. When the Switch is turned on, it outputs a 12V signal, which can be used to control the Remote Turn-On Input on many SoundExtreme products, including our marine radios, and amplified tower speakers (sold separately).
- The Switch has a built-in RF remote transmitter, which is designed to pair with and control Sound Extreme sound bars, marine radios, and amplified tower speakers (sold separately).
- The Switch fits in a standard Carling rocker switch opening, which is commonly used in the dashboard of many off-road vehicles, boats, and golf cars. The Switch panel is waterproof; however, the housing behind the panel is only splash proof
- CAUTION: In order to make sure there is no potential damage to your audio system, unplug or power off your audio equipment until after all connections are completed.
Features
The Switch is an all-in-one device providing power, audio, and LED lighting (Scenes) controls to a paired Sound Extreme product.
Remote Turn-On Output
In addition to operating as a power switch, the Switch also has a +12V Remote
Turn-On signal output, which can be connected to a Sound Extreme product’s
Remote Turn-On Input. That SoundExtreme product can then be automatically
turned on or off when you turn the Switch on or off.
RF Remote Transmitter
The Switch has a built-in RF 433MHz remote transmitter, which is used to pak
with and control SoundExtreme audio products. The first time you use the
Switch, you will need to pair it with a product. Once they are paired, your
product will remember your Switch. Next time you power on your product, your
Switch’s remote functions will be ready to use.
Switch Overview
Switch Layout
Connectors
Input
- Power Input:+ 12V, GND- Connect to your vehicle’s+ 12V battery. Only connect to a + 12V DC power supply.
Outputs
- Remote Turn-On Output: +12V signal output when the Switch is on.
- Power Outputs: + 12V, GN D – Connect to a Sound Extreme product’s power input (maximum current not exceeding 20A, 12V).
Button Functions
Power Button
- Press and hold for 3 seconds to turn the Switch on or off.
- When the Switch is on, short-press to turn the button backlights on or off.
- When the Switch is on, double-click to enable RF Remote Pairing with a Sound Extreme product.
Audio Mode Button
- Short-press to cycle through the Audio Modes on the paired SoundExtreme product(s). Different SoundExtreme products may have different Audio Modes. For example, the Sound Extreme Elite Soundbar has 5 Audio Modes: Bluetooth (Speaker Mode), EcoCast Transmitting, EcoCast Receiving, FM, and Aux-In.
Scenes Button
- Short-press to cycle through the 5 pre-defined Scenes (LED lighting presets) on the paired SoundExtreme product.
- If the paired Sound Extreme product has an LED Light Bar or Dome Light, press and hold to turn it on or off.
Play/ Pause and Tracking Buttons
- When the paired SoundExtreme product is in Bluetooth mode, press the Play/ Pause Button . to play or pause audio.
- When the paired SoundExtreme product is in Bluetooth Mode, press ◄ or ► to skip to the previous or next audio track.
- When the paired SoundExtreme product is in FM Mode, press ◄ or ► to tune to the previous or next radio station.
- Press ◄ and ► at the same time to clear Bluetooth pairing records.
Volume Buttons
- Press decrease or increase the volume.
Installation and Wiring
Installing Your Switch Onto Your Vehicle
The Switch is designed to snap into a standard Carling style rocker switch
opening.
- If you already have that style of an opening on your vehicle, you can simply snap the Switch into place.
- If your vehicle doesn’t already have that style of an opening, you will need to cut a rectangular hole into your vehicle. Before you cut, please refer to the dimensions under the Specifications section to determine the cutout size.
Connecting to an External Speaker
If you want to provide power to and control an external Sound Extreme
product’s power on and off feature, you will need to connect it to the
Switch’s Accessory Power Outputs and Remote Turn-On Ouput.
Accessory Power Outputs
Connect the Switch’s Accessory Power Outputs ( +12V and GND} to the power inputs on the SoundExtreme product you want to control.
- Make sure that the Switch’s RED +12V Wire is connected to the SoundExtreme product’s RED Wire and the Switch’s BLACK GND Wire is connected to the SoundExtreme product’s BLACK Wire.
Remote Turn-On Output
Besides the 12V power supply, the Switch has an optional Remote Turn-On Signal
Output to turn on and power off the Sound Extreme product you want to control.
The output voltage is 12V.
If your SoundExreme product has a Remote Turn-On Input, follow the steps
below:
- Connect the Switch’s (Dark Blue) Remote Turn-On Output Wire to the Sound Extreme products Remote Turn-On Input. You may need an extension cable (not included).
- Once the connections are completed, the Sound Extreme product will automatically turn on or off when the Switch is turned on or off.
Connecting to 12VDC Power Supply
When you install the Switch to a battery or a voltage regulator on a golf
cart, a boat, a quad bike, a UTV, or another vehicle, you need to make sure
that your vehicle battery or battery pack terminal voltage is 12VDC. If the
battery terminal voltage is not 12V, you will need a DC-DC converter with
output 12V. Connecting the Switch to a non-12VDC power source will lead to a
malfunction or damage to the Switch.
Recommendation: If you are not familiar with all of the vehicle’s battery or
ignition switch connections, consult your vehicle’s manual or a technician.
Incorrect connections to your vehicle’s battery or ignition signal terminal
may cause damage to your speaker and your vehicle.
Connect the +12V and GND wires to the 12VDC power supply.
- Make sure that the RED Wire is connected to +12V battery’s positive ( +) terminal and the BLACK Wire is connected to battery’s negative (-) terminal.
WARNING! Only connect to a 12V power supply. Do NOT connect to a 24 V, 36V, or 48V power supply. Connecting the Switch directly to these higher voltages will cause damage to the Switch and VOID THE PRODUCT WARRANTY.
Audio Functions
First Time RF Remote Pairing
The first time you use the Switch, you will need to pair the Switch with a Sound Extreme product. This process is only needed for the first time you use the Switch with a product.
Please follow the steps below for first-time pairing
-
Press and hold the Power Button to turn the Switch on.
-
Enable RF remote pairing on your SoundExtreme product.
Example : On a Sound Extreme Elite Sound bar, press and hold both the ( and ) Buttons on the Sound bar at the same time for 3 seconds. The Sound bar’s LED Party Lights will flash Green, indicating it is ready to pair with a remote. -
On your Switch, double-click the Power Button . Your Switch will start pairing.
-
Once paired, a Sound Extreme Elite Soundbar’s LED Party Lights will rapidly flash Green 3 times, indicating a successful pairing. Note: If the paired Sound Extreme product is not a Sound bar, it may produce a different prompt to indicate a successful pairing. Please refer to the product’s User Guide.
-
Now you can press a button on the Switch, such as the Audio Mode Button, to check if your Sound Extreme product responds.
Dimensions
- Unit Weight 4.59 oz (130 g)
- Power Input 9~16V,20A
- Power Output 9-16V,20A
- Remote Turn-On Output 12V, 1.2mA
- Storage Temperature -40°F to 122°F / -40°C to 50°C
- Operating Temperature 23°F to 95°F / -5°C to 35°C
Important Legal Information
FCC STATEMENT
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions:
- This dev1ee may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: FCC’s RF Exposure guidelines, this equipment should be installed
and operated with minimum distance between 20cm the radiator to your body.
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there 1s no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF WARNING STATEMENT
The device has been evaluated to meet general RF exposure requirement. The
device can be used 1n portable exposure condition without restriction
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all Instructions. Use only as intended.
The SoundExtreme unit is intended to be used indoors or outdoors and in land
or water environments The unit has been tested to IP66 waterproofing
standards, which means the unit can be exposed to dust and water, but should
NOT be submerged underwater.
To prevent fire or shock, do NOT attempt to power this unit if it is wet or
you suspect water has entered the unit. In this situation, please return the
unit to SoundExtreme for a free assessment. If we have found that the unit has
carried water, we will repair or replace the unit free of charge.
SAFETY ADVISORY & WARNING
Read and follow all instructions. Use only as Intended.
-
CAUTION: Do NOT open to repair. A qualified technician must carry out repair work.
ATTENTION: Do NOT connect to a SoundExtreme product with LEDCast technology while the urnt is wet. Make sure all connections are dry BEFORE connecting to a power source. Failure to do so may result in electrical damage to the unit and may void the warranty. -
WARNING: Cancer and Reproductive Harm
-
ATTENTION: Do NOT dispose of in a landfill Contact SoundExtreme at www.gracesupport.com or a certified recycling agent to dispose of the unit.
SAFETY
This product has a limited life span of use and should be replaced when it
shows obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so
could cause damage to the unit, allowing water to ingress. A unit with water
ingress should not be charged due to potential risk of tire or shock.
Please exercise care and good judgment when using your SoundExtreme unit. You
should always
- Return the unit to SoundExtreme if you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water.
You should never
- Never power your SoundExtreme unit if you suspect water has entered the device. Powering a device with water inside could be potentially hazardous and cause fire or a spark.
- Never use your Sound Extreme unit if you have dropped it or thrown it against a hard surface which may have destroyed the integrity of the housing. In the event of a severe impact to your unit, please return the unit to SoundExtreme to review for potential damage.
- Never attempt to fix, repair your SoundExtreme unit. Please send it back to Sound Extreme for any assessments and repairs.
CARE, MAINTENANCE & PRECAUTIONS
- Do NOT apply excessive force to any surfaces of the unit.
- Do NOT use or store the unit in places with high temperature.
- AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields.
LIMITED MANUFACTURER’S WARRANTY
The Switch is covered by a 1-year limited warranty that covers defects in
workmanship and I or materials for
a period of 1 year from original purchase date. This warranty does not apply
to any products which have been abused, neglected, modified or used for a
purpose other than the one for which they were manufactured. Please refer to
the above care and maintenance instructions for suggested care details. The
warranty Is valid only for the original owner who purchases the unit from an
authorized dealer. Transfers do not qualify for warranty protection.
SoundExtreme reserves the right to replace any out-of-stock or discontinued
product with a comparable product. Discontinued products may not be available
for warranty replacement. Any contents are NOT covered by the limited
manufacturer’s warranty. Warranty terms may be revised without notification at
the discretion of the manufacturer. Please visit
www.soundextreme.us for additional product &
warranty information.
Audio Rocker Switch Remote Control by SoundExtreme Inc., Houston, Texas. Designed in Texas. Made in China
What’s in the Box
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>