Nedis HHEM300WT Cordless Floor Cleaner User Manual

: June 5, 2024
: nedis

HHEM300WT Cordless Floor Cleaner

Nedis HHEM300WT Cordless Floor Cleaner

User Manual

Preface

Thank you for purchasing the Nedis HHEM300WT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

This product is intended to clean dust and liquids off waterproof hard floors such as. PVC, linoleum, tiles and waxed parquet.

This product is not intended to clean water-sensitive floors such as untreated cork floors.

The product is intended for indoor use only.

This product is not intended for professional use.

The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Cordless Floor Cleaner

---|---

Article number

|

HHEM300WT

Dimensions (l x w x h)

|

28 x 17 x 110 cm

Weight

|

2.6 kg

Input power

|

220-240 VAC ; 50-60 Hz

Output power

|

40 W

Maximum power

|

18 VDC ; 0.6 A

Noise level

|

65 dB

Battery capacity

|

40 W

Charging time

|

3.5 hours

Run time

|

Up to 1 hour

Clean water reservoir capacity

|

420 ml

Dirty water reservoir capacity

|

150 ml

Brush speed

|

400 rpm

Main parts (image A)

A

1. Handle

2. On / off button

3. Water spray button

4. Handle tube

5. Handle unlocking mechanism

6. Body

7. Roller brush locking button

8. Roller brush

9. Water reservoir handle

10. MAX indicator

11. Water inlet plug

12. Clean water reservoir

13. Lid unlock buttons

14. Lid

15. Dirty water reservoir lid

16. Dirty water reservoir

17. Self-cleaning button

18. Battery indicator LEDs / Power indicator LED

19. Water spray indicator LED / Water full indicator LED

20. Power adapter

21. Charging port

22. Charging base

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Do not leave any packaging material lying around carelessly. These may become dangerous playing material for children.
Make sure the product is placed on a flat and stable surface.
Do not drop the product and avoid bumping.
Do not use the product if it has been dropped, a part is damaged or defective or if it is leaking.
Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Never add solvents, solvent-containing liquids, or undiluted acids (such as detergent, gasoline, paint thinner, and acetone) to the water reservoir. This may damage the product.
Do not immerse the product in water.
Do not use in swimming pools containing water.
Do not fill the water reservoir above the MAX indicator.
Always use the voltage (A.C. Only) marked on the rating label.
Switch off and unplug the product when not in use or before maintenance.
Do not leave the product unattended when the product is connected to the power outlet.
Keep the product out of reach from children when the product is connected to a power outlet or cooling down.
Do not plug or unplug the power cable with wet hands.
Never use a dirty or damp charger, this might cause an electric shock.
Never cover the charging base, this might cause an electric shock.
To prevent a possible fire, do not block the air vents.
Do not use the product near explosive or flammable materials.
Disconnect the product from the power source before service and when replacing parts.
Do not dismantle, open or shred secondary cells or batteries.
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Do not subject cells or batteries to mechanical shock.
In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Keep cells and batteries clean and dry.
Only use the provided charger and charging base.
The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
Do not leave a battery on prolonged charge when not in use.
After extended periods of storage, it may be necessary to charge and discharge rechargeable cells or batteries several times to obtain maximum performance.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Installing the product

Make sure the product is placed on a flat and stable surface.

1. Push the handle tube A4 into the body A6.

When the parts are successfully assembled, you hear a click.

2. Place the product on the charging base A22.

3. Plug the power adapter A20 into a power outlet.

4. Plug the other end of A20 into the charging port A21.

Charge the battery for at least 3.5 hours when you use it for the first time.

5. The battery indicator LED A18 lights up.

6. Remove A20 from the power outlet after charging.

7. Leave the product on A22.

Battery indicator LEDs (image B)

B

The lowest battery indicator LED A18 starts flashing if the battery is empty.

Removing and filling the clean water reservoir (image C)

|

---|---

C

1. Hold the handle A1 with one hand, and pull the water reservoir handle A9 with the other hand to remove the clean water reservoir A12.

2. Pull out the water inlet plug A11 and rotate A11 to one side.

3. Add cold or warm tap water to A12 via the hole.

4. Do not exceed the MAX indicator A10.

5. Close A11.

6. Place A12 into A6.

Use

The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.

Using the product

Test the water resistancy of the floor.
This product is intended to clean dust and liquids off waterproof hard floors such as. PVC, linoleum, tiles and waxed parquet.
This product is not intended to clean water-sensitive floors such as untreated cork floors.
Make sure the clean water reservoir A12 is filled with water and the dirty water reservoir A16 is installed in the product.
Clean the floor from the inside out to avoid leaving footprints on the freshly wiped floor.
To avoid damaging the floor with a wet roller brush A8, place the product into the charging base A22 when the product is not in use.

1. Clean the floor with a vacuum cleaner to remove dust or loose particles.

2. Take the product out of A22.

3. Press the on/off button A2 to switch on the product.

The roller brush A8 starts to rotate.

4. Press the water spray button A3.

5. Move the product back and forth until A8 is fully wet.

6. Clean the floor by moving the product back and forth at the same speed as using a vacuum cleaner.

7. Press A2 to switch off the product.

8. Place the product on A22.

9. Press the self-cleaning button A17.

A8 starts to rotate.
The self-cleaning function removes the dirty water from A8.

10. Empty and clean A16. See ‘Emptying and cleaning the dirty water reservoir’.

11. Clean A8. See ‘Cleaning the roller brush’.

Troubleshooting

Problem

|

Possible cause

|

Solution

---|---|---

The product does not switch on.

|

The battery is empty.

|

Charge the product.

The lowest battery indictor LED A18 flashes.

The motor and water pump do not work. The power indicator A18 and the water full indicator A19 flashes.

|

A16 is full.

|

Empty A16.

The product shuts down automatically.

|

The product is overheated.

|

Switch off the product and allow it to cool down.

A8 is not wet enough.

|

A3 was pressed too short.

|

Press A3.

Move the product back and forth until A8 is fully wet.

A8 does not work.

|

A8 does not rotate.

|

Remove A8 and check if any object is stuck in it.

The product does not remove dirt.

|

A12 is empty.

|

Fill A12.

A8 is not correctly installed.

|

Install A8 correctly.

A8 is missing.

|

Install A8 correctly.

A8 is dirty or worn out.

|

Clean or replace A8.

The product does not clean well.

|

A8 is dirty.

|

Clean A8.

A8 is not wet enough.

|

Move the product back and forth until A8 is fully wet.

There are other cleaning soaps on the floor.

|

Clean A8 with water to remove residual soap.

Clean the floor repeatedly with A8.

The product does not absorb water properly.

|

A16 is missing.

|

Reinstall A16.

A8 is worn out.

|

Replace A8.

Storage

1.Empty A12 and A16 before storing the product.

2. Dry A8.

Do not store A8 into a closed cabinet.
Store the product in a dry room.

Cleaning & Maintenance

Before cleaning and maintenance, switch off the product and disconnect the power.
Let the product cool down before cleaning it.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Cleaning the roller brush (image D)

D

|

Maximum washing temperature 40 °C.

|

Do not iron.

---|---|---|---

|

Do not bleach.

|

Do not dry clean.

|

Do not tumble dry.

| |

1. Switch off the product.

2. Empty A12 and A16 to prevent spillage.

3. Place the product on the floor.

4. Pull the roller brush locking button A7 backwards and take A8.

5. Rinse A8 under running water.

6. Make sure the water temperature is not too high to avoid damage to the roller brush bristles.

7. Replace A8.

8. Place the product on A22.

Emptying and cleaning the dirty water reservoir (image E)

E

1. Place the product on A22.

2. Press the lid unlock buttons A13 on both sides and remove the dirty water reservoir lid A15.

3. Take A16 out of the product.

4. Use the dirty water reservoir lid A15 to open A16.

5. Empty A16.

6. Clean A16 with tap water.

7. Replace A16, A14.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---