Nedis LTLGQ3M2xx Desktop LED Lamp User Manual
- June 5, 2024
- nedis
Table of Contents
LTLGQ3M2xx Desktop LED Lamp
User Manual
Preface
Thank you for purchasing the Nedis LTLGQ3M2xx.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis LTLGQ3M2xx is a desktop LED lamp with a built-in wireless charger.
This product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Desktop LED lamp
---|---
Article number
|
LTLGQ3M2xx
Dimensions (l x w x h)
|
600 x 170 x 170 mm
Weight
|
402 g
Power input
|
12 VDC ; 2.0 A
Power
|
24 W
LED lamp
Rated power
|
5.5 W
Max. illumination
|
1000 Lux
Max. luminance
|
350 lm
Light modes
|
Natural, cool, warm
Color temperature
|
2700 – 6500 K
Adapter
Power input
|
100 – 240 VAC; 50 – 60 Hz
Power output
|
12.0 VDC ; 2.0 A
Power
|
24 W
Rated consumption power
|
21 W
Wireless charger
Power output
|
9 V / 1.1 A
Power
|
10 W
Radio frequency range
|
110 – 205 KHz
Radio frequency power
|
– 10.99 dBuA/m @ 10 m
Timer
|
Smart timer shutdown
Main parts (image A)
A
1. LED lamp
2. Power input
3. Power adapter
4. Wireless charging area
5. Light mode button
6. Power button
7. Timer button
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Disconnect the product from the power source and other equipment if problems occur.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Product in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions such as double insulation or reinforced insulation are provided, there being no provision for protective earthing or reliance upon installation conditions. NOTE A Class II products may be provided with means for maintaining the continuity of protective circuits, provided that such means are within the product and are insulated from accessible surfaces according to the requirements of Class II.
|
Indication to explain the product is suitable for indoor use only.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
1. Plug the power adapter A3 into the power input A2.
2. Plug the other end of A3 into a power outlet.
Use
Using the lamp
1. Press the power button A6 to switch on the LED lamp A1.
2. Press and hold A6 to change the brightness of A1.
3. Press the light mode button A5 to cycle through the different light modes.
- The light modes are Natural, Cool and Warm.
4. Press and hold the timer button A7 to set a timer for 40 minutes.
- A1 flashes twice to indicate the timer is active.
- A1 switches off after the timer runs out.
5. Press A6 to switch off A1.
Using the wireless charger
1. Place your QI wireless charging enabled device onto the wireless charging area A4.
2. Check the charging indication on your device to ensure your device is charging.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Clean the product before storing the product for a long period of time.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>