Nedis HPBT1201BK Over-Ear Headphones User Manual
- June 5, 2024
- nedis
Table of Contents
HPBT1201BK Over-Ear Headphones
User Manual
Preface
Thank you for purchasing the Nedis HPBT1201BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis HPBT1201BK are Bluetooth headphones with which you can enjoy music at any time and anywhere.
The product can be paired with any Bluetooth enabled audio/video device.
The ear cups can be folded for easy storage.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Over-Ear headphones
---|---
Article number
|
HPBT1201BK
Power input
|
5 VDC ; 0.5 A
Bluetooth® version
|
5.0
Bluetooth frequency range
|
2402 – 2480 MHz
Frequency response
|
20 – 20,000 Hz
Max. radio transmit power
|
4 dBm
Impedance
|
16 Ω
Sensitivity
|
105 ± 3 dB
Driver size
|
40 mm
Battery type
|
Lithium-ion, 3.7 V / 250 mAh
Charging time
|
Up to 2 hours
Play time
|
Up to 15 hours
Standby time
|
140 hours
Built-in microphone
|
Yes
Voice control
|
Siri, Google Assistant
Main parts (image A)
A
1. Status indicator LED
2. Next song / Volume up button
3. On/off / play / pause button
4. Previous song / Volume down button
5. Micro USB charging port
6. 3.5 mm input
7. Built-in microphone
8. USB power cable
9. 3.5 mm audio jack
Safety instructions
WARNING
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
- Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas .
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Disconnect the product from the power source and other equipment if problems occur.
- Do not expose the product to water or moisture.
- Do not use any charger other than that specifcally provided for use with the product.
Safety symbols on the product
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Use
Using the product
- Due to the wide variety of products with a bluetooth connection we cannot guaranty that all devices will be recognized or all operating options can function.
Charging the product
1. Plug the USB power cable A 8 into the micro USB charging port A 5.
2. Plug the other end of A 8 into a computer or power adapter.
Switching on the product
- Press and hold the on/off / play / pause button A 3 for 2 seconds.
Pairing the headphones to a Bluetooth audio source
1. Switch on the product to activate pairing mode.
The status indicator LED A 1 blinks red and blue to indicate pairing mode is active.
2. When pairing mode is not activated automatically, press and hold A 3 for 5 seconds.
3. Enable Bluetooth on the device you want to pair the headphones with.
4. Select “HPBT1201BK” from the list of available Bluetooth devices on your device.
- When paired, A 1 flashes blue every 5 seconds.
- If the headphones have been paired with another device before, make sure that device is switched off.
- If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.
Controlling the music
- Press A 3 to play or pause the music.
- Press next song / volume up A 2 to skip to the next song.
- Press the previous song / volume down button A 4 to go back to the start of the song. Press again to go to the previous song.
Controlling the volume
- Press and hold A 2 to increase the volume.
- Press and hold A 4 to decrease the volume.
Making phone calls
- To answer an incoming call, press A 3.
- To reject an incoming call, press and hold A 3 for 1 seconds.
- To end a call, press A 3.
- To quickly redial the last called number, double press A 3.
Using voice assistant
- Press an hold A 3 for 1 second to activate the voice assistant on your mobile phone (Siri or Google Assistant).
Switching off the headphones
- Press and hold A 3 for 4 seconds to switch off the headphones.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product HPBT1201BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/HPBT1201BK#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>