Homvana H111S Smart Hybrid Ultrasonic Humidifier User Manual

Homvana H111S Smart Hybrid Ultrasonic Humidifier

SAFETY INFORMATION

READ AND SAVE THESE SAFETY WARNINGS & INSTRUCTIONS
IMPORTANT: Please read, understand and comply with all of the instructionsin this manual, or it may result in serious injury and/or damage to the product. If the humidifier is damaged or if it is not function ing properly, please contact us: [email protected]
Before Use

• ONLY use this humidifier as described in this manual.
• ALWAYS keep the humidifier out of reach from children.
• DO NOT use this product in wet environments
• DO NOT place the humidifier near heat sources, such as stove tops, ovens, or radiators.
• DO NOT place the humidifier near any large pieces of furniture or in any high-traffic area where it can be easily knocked over.
• ALWAYs place the humidifier on a flat, level, water-resistant surface before operation
• DO NOT overfill the water tank to it overflowing.
• DO NOT plug in the unit with wet hands.
• DO NOT allow water or other liquids into the mist tube or air flue.

While Using

• DO NOT rotate or cover the nozzles while the humidifier is on.
• DO NOT attempt to inhale the mist directly from the nozzles.
• DO NOT shake the humidifier while using.
• DO NOT point the nozzle directly to the smoke alarm, or it may cause a wrong alarm

Caution: Risk of Leaks and Electric Shock
DO NOT add essential oil, supplemental water treatment liquids, or third-party water filters into the water tank or base. This will damage the humidifier and cause leaks. ONLY add essential oil to the aroma pad.
After Use

• ALWAYS unplug the humidifier when not in use, or while cleaning it out.
• DO NOT clean the humidifier right after turning it off, especially after diffusing warm mist. Allow the humidifier to completely cool before cleaning.
• DO NOT immerse the humidifier base, power cord, or plug in water
• DO NOT use detergents to clean the humidifier, ONLY use distilled white vinegar.
• DO NOT place foreign objects into the unit’s base or water tank.
• DO NOT use other items as replacement parts for this product.

Getting to Know Your Humidifier

Package Contents

Specifications

Product Overview

Controls

Note: You can use Homvana App to control these functions and additional functions as well.

On/Off Button
Tap to turn your humidifier on/off.

Mist Level Button
Tap repeatedly to change the cool mist levels: Medium, High and Low.
Note:

• Medium cool mist is the default setting when the humidifier is first turned on.
• The humidifier will remember the cool and warm mist levels that you previously set when turned off and left plugged in.

Heating Button
Tap repeatedly to change or turn on/off the warm mist levels: High, Off, Low, Medium.
Note:

• High warm mist is the default setting when the humidifier is first turned on
• The humidifier may take 15-20 minutes to warm up before its producing.

Caution: The warm mist produced may be hot. Don’t place your bare hands, face or other exposed skin over the nozzles while using the warm mist function.

Auto Button
Tap to turn on/off Auto Mode. The humidifier will produce mist as needed to maintain a comfortable relative humidity (RH) percent of 60% by default

Note:

• Timer, Sleep Mode or Child Lock can be used with Auto Mode
• Tap the Mist Level Button, Heating Button or Humidity Button to cancel the Auto Mode.

Press and hold for 5 seconds to pair with the Homvana App.
Note:

• Should be completed with in 3 minutes after the humidifier is powered on. If not, please unplug the humidifier for a while and retry.
• Press and hold for 5 seconds to reset the humidifier’s default settings and disconnect it from Wi-Fi@ and Homvana App.

Humidity Button
Tap repeatedly to program the Relative Humidity (RH) percentage among 306 to 90% for the humidifier. To confirm your selection, the humidity display will flash 3 times. To cancel your selection, press the Button for 2 seconds
Note:

• The programmed humidity level can be added 59% humidity each time you press the Humidity Button.
• After setting the RH percentage, the display will alternate between the set RH percentage and the current humidity percentage.
• Once the environment RH reaches the your preset one, the humidifier will automatically stop misting and enter standby mode, and it will start misting again when the humidity drops to 5% below the preset humidity.

Timer Button
Tap repeatedly to set your desired timer among I to 12 hours. Once you stop tapping, the display will flash 3 times and the timer will start. To exit the timer function, tap repeatedly or press for 2 seconds until you hear a beep sound.
Note

• When the timer starts, the display will alternate every 3 seconds between the remaining auto-off time and the current humidity percentage
• Once selected your desired time, the humidifier will automatically turn off when the timer is finished counting down.

Sleep Button
Tap to turn on/off Sleep Mode. When Sleep Mode starts, the LED display will turn off, the humidifier will continue to work as previously set, and no more beep sound for pressing other Buttons.

Child Lock Button
Press and hold for 3 seconds to turn on/off Child Lock.
Note:
All the Buttons except the Child Lock Button (including the ON/OFF Button) are invalid under Child Lock Mode.

Getting to Use Your Humidifier

Set up
Place the humidifier on a level, elevated, and water-resistant surface, such as a table or nightstand. Make sure the room is well-ventilated.

Note:

• Position the humidifier at least 30-cm/12-in away from walls and appliances to prevent them from getting wet.
• Direct the nozzles away from any furniture to prevent your furniture from getting wet.

Fill or Refill

Remove the tank cover and fill the tank with room-temperature water.
Note:

• Purified or distilled water are recommended to fill the tank. Using hard water will require frequent cleaning and maintenance.
• DO NOT overfill the water tank to it overflowing.

CAUTION

• DO NOT add water through the mist tube.
• DO NOT add water directly into the base chamber.
• DO NOT add essential oil into the water tank, base, or mist tube.
• ONLY add essential oil to the aroma pad.

Replace the tank cover and place the water tank to the base

Homvana App Setup

Note: Due to ongoing updates and improvements, the Homvana App may be slightly different from that shown in the manual. In case of any differences, follow the in-app instructions and FAQs

1. Scan the QR code below, or search “Homvana” in the Apple App Store or Google Play Store to download the Homvana App.
2. Open the Homvana App. If you already have an account, tap Log In. If not, to create a new account, tap Sign Up.

Note: You must create your own Homvana account to use third-party services and products. With a Homvana account, you can also allow your family and friends to control your smart humidifier.

Wi-Fi Connection

1. Press and hold the AUTO Button for 5 seconds and confirm that the Wi-Fi@ Indicator is blinking rapidly. Add the device to the Homvana App.
   Note: Should be completed within 3 minutes after the humidifier is powered on. If not, please unplug the humidifier for a while and retry.

2. Press and hold the AUTO Button for 5 seconds to reset the humidifier’s default settings and disconnect it from Wi-Fi@ and Homvana App.

3. Follow the in-app instructions to set up your smart humidifier.
   Note:

• You can use the Homvana App to connect your smart humidifier to Amazon Alexa or Google AssistantM, Follow the in-app instructions to connect Homvana to your voice assistant.
• Your phone must have Location turned on while your phone is connecting to your smart humidifier. This is required to establish the Bluetooth@ connection. You can turn Location off after your smart humidifier is finished connecting to the Homvana App.

Use Your Humidifier

Note: You can use Homvana App to remotely control your smart humidifier and access the additional functions.

1. Plug in the humidifier. When connected to power.
   Note: DO NOT plug in the unit with wet hands

2.  Tap the O ON/OFF Button to turn on the humidifier. The humidifier will start misting, and its LED display will show the current humidity and temperature.
   Note:

   • The combined medium cool mist and high warm mist is the default setting when the humidifier is turned on.
   • Before connected to power, rotate the nozzles to adjust the direction of the mist.
   • DO NOT rotate or cover the nozzles while the humidifier is on.
   • DO NOT attempt to inhale the mist directly from the nozzles.
   • If there is no water in the tank or the humidifier runs out of water, the machine will stop misting. Refill the tank (see Fill or Refill, page 7-9) and tap the On/off Button to restart the humidifier.

3. Tap to select your desired mist levels or humidity levels. To select your desired cool or warm mist level, tap repeatedly theMist Level Button or the SHeating Button. To select your desired humidity levels, tap repeatedly the OHumidity Button or tap the Auto Button to auto control the humidity level at a relative comfortable humidity of 60%. (see Controls, page 4-7)
   Note:

   • When your room has reached your preferred humidity level, tap the Misting Level Button or $) Heating Button to lower its cool or warm mist level, or just turn it off (see Controls, page 4-7
   • The humidifier stops misting in Auto Mode if the humidity level is above 60% (see Controls, page 4-7

4. Optionally, use the controls to set an auto-off timer, activate Sleep Mode or Child Lock, and more. (see Controls, page 4-7)

5. Tap the OOn/off Button to turn off the humidifier.

Use the Homvana App

Note: You can use Homvana App on your phone to assess additional functions, including those listed below.
Remote Control
Turn on/off your humidifier. Select the mist levels and heating levels. Turn on/off the Auto Mode and Sleep Mode. Set a target humidity for the humidifier to auto off.

Set Timers &Schedules
Program a timer or create a schedule for your personalized needs

Monitor Humidity Levels
Check the current humidity level and temperature in the humidifier’s environment.

Third-Party Voice Control
Compatible with Amazon Alexa and Google Assistant for voice commands.
Note:
All the Buttons except the Child Lock Button (including the ON/OFF Button) are invalid under Child Lock Mode.

(OPTIONALLY) Use the Aroma Box

1.  Turn off the humidifier and unplug it from the power outlet.
2. Pull out the aroma box at the bottom of the base.
3. Add 2-3 drops of essential oil on the aroma pad.
4. Replace the box into the humidifier.
5. Plug in and turn on the humidifier.

Note:

• DO NOT add essential oil, supplemental water treatment liquids, or third-party water filters into the water tank or base.
• ONLY add essential oil to the aroma pad.
• The aroma pad can be cleaned and reused after diffusing essential oil.

Cleaning & Maintenance

CAUTION:

• Make sure the humidifier is unplugged from any power source before Cleaning.
• The water in the base near the nebulizer may still be warm after turning off the humiditier. Be cautious to use when pouring out the water.
• DO NOT touch the nozzles before the humidifier completely cools down.
• DO NOT rub the atomizer with hard or abrasive objects
• Clean your humidifier at least once a week. Rinse out the water tank every time before you use
• DO NOT use detergents to clean the humidifier.
• Use clean or distilled water instead of tap water to prevent scale buildup.

Cleaning the Humidifier

1. Turn off the humidifier.
2.  Drain the remaining water in the tank and the base.
3.  Cleaning the humidifier and its parts
4.  Change a new one when the anti-scale pad has turned hard.

• Clean the base and tank cover
  Please clean any water drops and dirt with a damp cloth then wipe them dry with a clean, dry cloth or tissues.

• Clean the water tank and water valve
  Add in water to the water tank and rinse it thoroughly. Use the included brush to gently wipe dirt (like lime on the bottom) that cannot be removed normally

• Clean the steam hood and anti-scale pad
  Remove the steam hood and anti-scale pad from the main unit and rinse them under clean, running water. If there is still dirt that cannot be removed from the steam hood, place the steam hood in a small container. Fill with citric acid and warm water (The ratio of citric acid and warm water is1:20) to cover it. Soak for 10-15 minutes. Then wipe it gently with the included brush, and clean it with a damp cloth until any acid smell is completely gone.

• Clean the main unit, float, and atomizer
  For dirt that is hard to be removed, fill the main unit with citric acid and warm water (The ratio is : 20) and soak for 10-15 minutes. Pour the liquid, then wipe and clean the main unit until any acid smell is completely gone.

• Clean the aroma box
  Pull out the the aroma box and rinse the aroma pad under warm, running water.
  Note:

  • DO NOT pour liquid detergents into the aroma pad.
  • It is recommended to change the aroma pad every 6 months

• Dry the main unit and other parts

  • Wipe them with dry cloth after cleaning and let them air dry in a cool indoor place.

  • Water remaining on the surface or inside the device may lead to smelly odors and mold.
    Note:

  • DO NOT submerge the base in water

  • DO NOT allow water inside the air flue or air outlet to prevent damage to the humidifier

• Storagge
  Store the device in a dry place without direct sunlight.
  Note:
  DO NOT store the device when it is not thoroughly dry. Doing so may cause bad odors and mold.

Maintenance

•  Clean your humidifier at least once a week if you are using it on a regular basis to prevent any bacterial or mold growth.
• Always rinse out the water tank and change water before each use.
• It is recommended to use distilled water with the humidifier to prevent white residue around the area where your humidifier is being used.
• Clean and drain the humidifier before storage to prevent bacterial and mold growth.

Troubleshooting

The humidiier doesn’t turn on, or stop misting unexpectedly.

| Plug in the humidiier and turn it on.
Add puriied or distilled water to the water tank.
Check to see if the humidiier is in Auto Mode. Depending on Auto Mode settings, the humidiier will automatically turn off when the humidity level is above the target level.
Display shows an incorrect humidity percentage.| The room may be larger than the humidiier’s effective range.

Move to a smaller room.

Little or no mist comes out.

| Turn the mist level to a higher setting.
Fill the water tank.
There may be too much water in the base chamber. Empty the base chamber. Reill the water tank and place it properly onto the base.
Make sure the humidiier is not set on carpet or other surfaces that may block air flow.
Make sure the nozzles are not blocked or clogged.
Make sure the humidiier is on a level surface.
The water temperature may be too low. Turn the mist level to the highest setting and let the humidiier run for a while, then adjust to the desired setting.
If the water tank or base was washed with detergent, rinse thoroughly with clean water to remove any detergent.
Problem| Possible Solutions
---|---
Humidiier uses water too quickly.| The humidiier uses up water based on the environmental temperature and humidity. If your environment is cold and/or dry, the humidiier will run out of water faster.

Humidiier produces an unusual smell.

| If the humidiier is new, unplug and rinse its detachable parts,

then place in a cool, dry place for 12 hours.

If essential oil was added on the aroma pad, rinse the pad under clean water and allow it to dry.
Clean the water tank and base chamber

(see Cleaning & Maintenance, page 10).

Mold grows inside

the humidiier.

| Clean the water tank and base chamber regularly

(see Cleaning & Maintenance, page 10-13).

Essential oil has little or no smell.| Add 2-3 drops of essential oil.

For best results, use pure essential oil.

Humidiier makes a loud or unusual noise.

| Make sure the water tank is properly in place

(see Fill or Reill, page 7-9}

Set mist level to a lower setting.
Empty the base chamber. Reill the water tank and place the

water tank properly onto the base.

The humidiier may be malfunctioning. Stop using the humidiier and contact us: [email protected]
White dust appears around

the humidiier.

| We recommend using puriied or distilled water to ill the humidiier.

Avoid using water with high mineral content.

Clean the humidiier (see Cleaning & Maintenance, page 10-13).

Water leaks from the humidiier.

| Make sure the water valve is securely placed.
---|---
Avoid running the humidiier in a room with over 60% relative

humidity.

Wipe any excess water off the top and bottom of the base.
DO NOT shake the humidiier.
Make sure to place the humidiier on a flat, level surface.
Check the water tank for leaks. If there are leaks, contact us:

[email protected]

Condensation forms around humidiier

or windows.

| ****

Humidity may be too high. Turn down the mist level, turn

off the humidiier, or open a door or window to the room.

1

| ****

Clean the scale on the

PTC heater. (see Cleaning & Maintenance, page10-13).

|

Change the anti-scale pad.

|
2|

Clean the scale on the inner side of the base chamber.

|
Error Code| Possible Solutions| Figure
---|---|---

3

| ****

Pour out some water in the base chamber.

| ****

Unscrew the water valve and clean it. Put the water valve back before restarting your humidiier. If the humidiier still can’t work, please contact us:

[email protected]

|

4

| ****

The humidiier is malfunctioning.

Please contact us:

[email protected]

|

5

| ****

Fill the water tank.

| ****

Unscrew the water valve and clean it _( see Cleaning & Maintenance, page 10-13 ). _Put the water valve back before restarting your humidiier.

| ****

Clean the scale on the inner side of the base chamber _( see Cleaning & Maintenance, page 10-13 ). _If the humidiier still can’t work, Please contact us:

[email protected]

| ****

Homvana App Troubleshooting

working correctly.
Make sure the Wi-Fi password you entered is correct.
Make sure your humidiier and phone are within 30 ft / l0 m of

each other.

| Reset the humidiier by pressing and holding for l5 seconds.

Then try connecting again.

Problem| Possible Solutions|
---|---|---

My humidiier is offline.

| Make sure the humidiier is plugged in. The humidiier may appear to be offline if it is unplugged, or if the outlet does not have power.|
Refresh the Homvana menu by swiping it down on the screen.|
Make sure your router is connected to the internet and your

phone’s network connection is working.

|
Reset the humidiier using one of these options:

Delete the humidiier from the Homvana app. Swipe left (iOS®) or press and hold (Android), then tap Delete. Then reconigure your humidiier with the Homvana app.

|
Press and hold for l5 seconds. Then reconigure your humidiier with the Homvana app.|
Note: Power outages, internet outages, or changing Wi-Fi

routers may cause your humidiier to go offline.

|
The humidiier uses up water based on the environmental temperature and humidity. If your environment is cold and/or dry, the humidiier will run out of water faster.|

The Homvana App is displaying an incorrect humidity percentage while the humidiier is turned on.

|
The room may be larger than the humidiier’s effective range.

Move to a room smaller than 430–753 ft² / 40–70 m².

|
Moisture may have built up inside the humidity sensor. Make sure the nozzles are facing away from the aroma box so that mist does not settle on the sensor inside the aroma box (see diagram in Getting To Know Your Smart Humidiier, page 5}. Turn off the humidiier, remove the aroma box, and allow the sensor to air dry.|
If the humidiier is placed within l2 inches / 30 cm of a wall or in a corner, the humidity sensor cannot provide a proper reading for the relative humidity in the room.|
The humidity sensor will give an improper reading if it is

exposed to dust. Avoid using the humidiier in dusty rooms.

|

NOTE
If your problem is not listed, please check the in-app FAQ (Homvana App-Me- FAQ&Feedback) or directly contact us [email protected] @homvanaofficial G

WARRANTY

Thank you for choosing Homvana Hybrid Ultrasonic Humidifier. At Homvana, we use only the highest-quality materials, giving us the confidence to provide you with

• 30-day money-back guarantee
• Industry-leading 3-year warranty
• Lifetime technical support

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: () this device may not causc harmful interferenc, and 2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not cxpressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This cquipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determincd by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Conncct the cquipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20Cm the radiator your body. This device and its antenna(s) must not be co-locatcd or operation in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>