Homvana H211S Smart True HEPA Air Purifier User Manual

Shenzhen Bueno Technology co., LTD

Air Purifier H211S

| 140×180mm(34p)
|  105g
| 2022.2.28
| 2022.7.02
C0 M0 Y0 K20

C0 M0 Y0 K70
C10 M0 Y0 K100
PANTONE 3115C

Smart
True HEPA
Air Purifier
User Manual / Model H211S

Package Contents

Air Purifier H211 x 1
Power Adapter & Cord x 1
True HEPA 4-Stage Filter x 1
(Inside the Air Purifier)
User Manual x 1
Quick Start Guide x 1

Specifications

Safety Information

READ AND SAVE THESE SAFETY WARNINGS & INSTRUCTIONS
IMPORTANT: Please read, understand and comply with all of the instructions in this manual, or it may result in serious injury and/or damage to the product. If the humidifier is damaged or if it is not functioning properly, please contact us: support@homvana.shop

• DO NOT try to repair it yourself.

• ONLY use this air purifier as described in this manual.

• Supervise children when they are near the air purifier.

• DO NOT use without removing the plastic wrap from the filter.

• ALWAYS place the purifier on a flat, level surface before operation.

• DO NOT use in excessively humid areas.

• DO NOT place the purifier near any heat source.

• ALWAYS keep the dry inside of the purifier. To prevent moisture buildup, DO NOT place in rooms with major temperature changes or underneath air conditioners.

• DO NOT place the cord under furniture or appliances.

• DO NOT use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.

• ALWAYS keep 5 ft / 1.5 m away from where oxygen is being administered.

• DO NOT place the purifier in any high-traffic area where easily be knocked over.

• DO NOT sit on or place heavy objects on the air purifier.

• DO NOT place anything into any opening in the air purifier.

• DO NOT wash the purifier under running water.

• ALWAYS unplug the purifier before servicing, such as changing the filters, cleaning the purifier, or whenever it is not in use.

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
  If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.

• Not for commercial use. Household use only.

Getting to Know Your Air Purifier

Product Overview

|
---|---

Controls

Power Button
Tap to turn on/off the air purifier. The fan will start on a level I.
Memory Function
The air purifier will remember the previous fan speed setting when turned off and left plugged in or when unplugged during operation.
The air purifier will not remember Timer, Display Off, or Sleep Mode setting.
Auto Mode Button
Tap to turn on/off Auto Mode. Once started, the air purifier will automatically optimize the fan speed based on the indoor air quality.
Air Quality Indicator
Display real-time air quality using the automatic air sensor inside the air purifier. The air purifier may take up to 1 minute to detect air quality.

Fan Speed Button
Tap repeatedly to cycle through the fan speeds: I (low), II (medium), and Ill (high).
Note:

• The fan speed indicators will light up when active.
• Fan speed III is the loudest, but cleans air the quickest.
• To effectively clean air, keep windows and doors closed while the air purifier is on.
• For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (level Ill) for 15-20 minutes before using a lower speed.

Timer Button
Tap repeatedly to set the timer among 2H, 4H, and 8H, or turn the timer off.

Sleep Mode Button
Tap to turn on/off Sleep Mode. Sleep Mode operates quietly by using the lowest possible fan speed. After the Sleep Mode starts, the Sleep Mode Button and the Power Button will light up at half brightness, while the rest of the lights or indicators on the panel will be off, including the air quality indicator.
Note:

• After Sleep Mode starts, tap any button (except the Power Button) to exit and return to the previous fan speed, Timer, or Auto Mode, as well as the corresponding indication, before Sleep Mode.
• After Sleep Mode starts, tap twice the Display/Filter Button to turn off all the lights and indicators.

Display/Filter Button
Tap to turn off the display. After the display is off, tap any button (except the Power Button) to turn the display back on.
The Display/Filter Button will light up red after about 6-8 months of use, to remind you of the time to check or change the filter. Each time you change the filter, press and hold the button for 3 seconds, the button light flashes 3 times and off, to successfully reset the filter replacement time.
Note:
Display/Filter Button will light up red as a reminder to change the filter after about 6-8 months of use; the red light reminder remains 100% its brightness, unaffected by the Sleep Mode, until you successfully reset the filter replacement time.

About the Filtration System

| A. Washable Pre-filter
Filters large particles like dust, lint, fibers, hair, and pet dander.
---|---
| B. Honeycomb Activated Carbon Filter
Physically adsorbs smoke, odors, fumes, and volatile organic compounds (VOCs)
| C. H13 True HEPA Filter
• Captures at least 99.97% of airborne particles as small as 0.1 microns.
• Filters small particles such as mold, tiny dust, smoke, and allergens such as pollen.
| D. Medical-grade Nano-Zinc Filter
Targets mold, mites, microbes even bacteria.

Getting to Use Your Air Purifier

Setup

1. Open the filter cover of the air purifier and remove the filter and the power cord from the plastic packaging.
2. Place the true HEPA 4-stage filter back into the air purifier with the pull tabs facing out.
3. Replace the filter cover by lining up the cover’s feet with the matching slots on the bottom of the housing.
4. Push the cover closed. 5. Place the air purifier on a flat surface. Leave 15 in / 38 cm of clearance to allow air to pass through the air inlets on the sides.

Use Your Air Purifier

1. Plug in and tap the Power Button to turn on the air purifier. The fan will start on level I.
2. Optionally, tap to change fan speed, set an auto-off timer, turn off the display, or activate Auto Mode or Sleep Mode.
3. Tap the Power Button again to turn off the air purifier. 4. Don’t forget to check or change the filter when the Display/Filter Button lights red.

Cleaning & Maintenance

Clean the Air Purifier

Filter| When to Clean|

When to Replace

---|---|---
The Washable Pre-Filter| Vacuum every 2-4 weeks| 6-8 months
Wash every 1-2 months
Honeycomb Activated
Carbon Filter| DO NOT clean
H13 True H EPA Filter
Medical-grade Nano-Zinc Filter

1. Unplug before cleaning.

2. Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.

3. Open the filter cover to remove the true HEPA 4-stage filter, and clean the washable pre-filter with a soft brush or vacuum hose to remove hair, dust, and large particles.

4. Carefully peel the pre-filter away from the rest of the filters.

5. Gently wash the pre-filter under running water. Dry completely before placing it back on the velcro tapes.
   Note: DO NOT clean the filters other than the washable pre-filter.

6. Replace the true HEPA 4-stage filter in the housing, and close the filter cover.

Clean the Air Sensor Lens

1. Unplug the air purifier.

2. Open the air sensor cover.

3. Use a cotton swab dipped in water to clean the air sensor lens.

4. Wipe the lens dry with a dry cotton swab.
   Note: DO NOT remove the foam piece attached to the air sensor cover.

5. Replace the air sensor cover.

Replace the Main Filter

When the Display/Filter Button lights up red or the true HEPA 4-stage filter is hoped to change before the Display/Filter Button lit up:

1. Unplug the air purifier and remove the filter cover.
2. Remove the old filter and properly dispose of it.
3. Clean out any remaining dust or hair inside the air purifier using a vacuum hose. DO NOT use water or liquids to clean the air purifier.
4. Unwrap the new filter and place it inside the air purifier with the pull tabs facing out.
5. Replace the filter cover and plug in the air purifier.
6. Press and hold the Display/Filter Button for 3 seconds until the button light flashes 3 times and off, to successfully reset the filter replacement time.
   Note: • Depending on how often you use the air purifier, the Display/Filter Button light should turn on after about 6-8 months of use, reminding you to change the filter.
   • To maintain the performance of your air purifier, only use official filters. To buy replacement filters, visit Homvana’s online store on Amazon.

Storage

If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store them in a dry place to avoid moisture damage.

Troubleshooting

Problem|

Possible Solutions

---|---
Air purifier will not turn on or respond to button controls.| Plug in the air purifier.
Check to see if the power cord is damaged. If so, stop using the air purifier, and please contact us: support@homvana.shop.
Plug the air purifier into a different outlet.
Air purifier may be malfunctioning. Please contact us: support@homvana.shop.
Air purifier makes an unusual noise when the fan is on.| Make sure the filter is properly in place with plastic packaging removed.
---|---
Make sure the air purifier is operating on a flat, even surface. Clean the filter or replace it if necessary (see Cleaning

& Maintenance, page 9).

Air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and please contact us: support@homvana.shop. DO NOT try to repair the air purifier yourself.
Airflow is significantly reduced.| Make sure the filter’s plastic packaging is removed.
Tap to increase the fan speed.
Leave at least 15 in /38 cm of clearance on all sides of the air purifier.
The washable pre-filter may be clogged by large particles, such as hair or lint, blocking airflow. Clean the Pre-Filter (see Cleaning & Maintenance, page 9)
Clean the filter or replace it if necessary (see Cleaning & Maintenance, page 9).
Poor air purification quality.| Tap to increase the fan speed.
Make sure no objects are blocking the top or sides of the air purifier for proper airflow.
Close doors and windows while running the air purifier.
Make sure the filter is removed from its plastic packaging and properly in place.
If the room is larger than 375ft2/ 35m2, air purification will take longer. The air purifier may not be as effective in significantly larger rooms.
Clean the filter or replace it if necessary (see Cleaning & Maintenance, page 9)
Clean the air sensor (see Clean the Air Sensor Lens, page 70).
The air purifier is producing an unpleasant odor.| Clean the filter or replace it if necessary (see Cleaning & Maintenance, page 9).
---|---
Make sure that the air purifier is in a room where the relative humidity is less than 85% RH. Higher humidity levels may cause mildew to grow on the filter.
Air quality indicator always stays the same color.| When the purifier is turned on, the air quality indicator will be green by default. The air purifier may take up to 1 minute to detect air quality.
Avoid using an ultrasonic humidifier near the air purifier. If using an ultrasonic humidifier near the air purifier, the mist may affect the accuracy of the air sensor. The sensor will detect the large mist particles, and the air quality indicator may turn red.
Clean the air sensor
(see Clean the Air Sensor Lens, page TO).

WARRANTY

Thank you for choosing Homvana® Smart True HEPA Air Purifier. At Homvana,  we use only the highest-quality materials, giving us the confidence to provide you with:
30-day money-back guarantee
Industry-leading 3-year warranty
Lifetime technical support
Whatever you need, we’re here to help. Just get in touch with us at:
support@homvana.shop
You will get timely assistance, replacement, or refund. We promise to make things right with our wholehearted service.

Homvana App Setup

Note ： Due to ongoing updates and improvements, the Homvana App may be slightly different from that shown in the manual. In case of any differences, follow the in-app
instructions and FAQs.

1. Scan the QR code below, or search “Homvana” in the Apple App Store or Google Play Store to download the Homvana App.https://a.smart321.com/homvana
2. Open the Homvana App. If you already have an account, tap Log In. If not, to create a new account, tap Sign Up.

Note:
You must create your own Homvana account to use third-party services and products. With a Homvana account, you can also allow your family and friends to control your
smart humidifier.

Wi-Fi Connection

1. Press and hold the AUTO Button for 5 seconds and confirm that the Wi-Fi® Indicator is blinking rapidly. Add the device to the Homvana App.
   Note:
   Should be completed within 3 minutes after the humidifier is powered on. If not, please unplug the humidifier for a while and retry.

2. Press and hold the AUTO Button for 5 seconds to reset the humidifier’s default settings and disconnect it from Wi-Fi® and Homvana App.

3. Follow the in-app instructions to set up your smart humidifier.

Note:

• You can use the Homvana App to connect your smart humidifier to Amazon Alexa or Google Assistant™. Follow the in-app instructions to connect Homvana to your voice assistant.
• Your phone must have Location turned on while your phone is connecting to your smart humidifier. This is required to establish the Bluetooth® connection. You can turn Location off after your smart humidifier is finished connecting to the Homvana App.

Use the Homvana App

Note： You can use Homvana App on your phone to assess additional functions, including those listed below.

Remote Control
Turn on/off your humidifier.
Select the mist levels and heating levels.
Turn on/off the Auto Mode and Sleep Mode.
Set a target humidity for the humidifier to auto off.
Set Timers & Schedules
Program a timer or create a schedule for your personalized needs.
Monitor Humidity Levels
Check the current humidity level and temperature in the humidifier’s environment.
Third-Party Voice Control
Compatible with Amazon Alexa and Google Assistant for voice commands.
Note:
All the Buttons except the Child Lock Button (including the ON/OFF Button) are invalid under Child Lock Mode.

Homvana App Troubleshooting

Problem|

Possible Solutions

---|---
Why isn’t my humidifier connecting to the Homvana app?| Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device.
Make sure you are on a secure 2.4GHz Wi-Fi network. Confirm that the network is working correctly.
Make sure the Wi-Fi password you entered is correct.
Make sure your humidifier and phone are within 30 ft /10 m of each other.
Reset the humidifier by pressing and holding it for 15 seconds. Then try connecting again.
Problem| Possible Solutions
---|---
My humidifier is offline.| Make sure the humidifier is plugged in. The humidifier may appear to be offline if it is unplugged, or if the outlet does not have power.
Refresh the Homvana menu by swiping it down on the screen.
Make sure your router is connected to the internet and your phone’s network connection is working.
Reset the humidifier using one of these options:
Delete the humidifier from the Homvana app. Swipe left (i058) or press and hold (Android), then tap Delete. Then reconfigure your humidifier with the Homvana app.
Press and hold for 15 seconds. Then reconfigure your humidifier with the Homvana app.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause your humidifier to go offline.
The humidifier uses up water based on the environmental temperature and humidity. If your environment is cold and/or dry, the humidifier will run out of water faster.
The Homvana App is displaying an incorrect humidity percentage while the humidifier is turned on.
The room may be larger than the humidifier’s effective range. Move to a room smaller than 430-753 ft2 /40-70 m2.
Moisture may have built up inside the humidity sensor. Make sure the nozzles are facing away from the aroma box so that mist does not settle on the sensor inside the aroma box (see diagram in Getting To Know Your Smart Humidifier, page 5). Turn off the humidifier, remove the aroma box, and allow the sensor to air dry.
If the humidifier is placed within 12 inches/30 cm of a wall or in a corner, the humidity sensor cannot provide a proper reading for the relative humidity in the room.
The humidity sensor will give an improper reading if it is exposed to dust. Avoid using the humidifier in dusty rooms.

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

support@homvana.shop
EPA Est. No. 101279-CHN-1
Meets California ozone emissions limit: CARB certified

CONFORMS TO UL STD. ULS07 CERTIFIED TO CSA STD C22.2 NO.113

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>