Nedis WIFICI40CWT Full HD IP Camera User Manual

: June 5, 2024
: nedis

WIFICI40CWT Full HD IP Camera

Nedis WIFICI40CWT Full HD IP Camera

User Manual

Preface

Thank you for purchasing the Nedis WIFICI40CWT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis WIFICI40CWT is an IP security camera with a viewing angle of 122 degrees.

If the security camera detects movement or sound, you will receive a warning message on your phone.

With the app you can watch live video images, play back, but also listen in and talk back.

The product is exclusively intended as an IP security camera for indoor use.

Consult the local laws and regulations for this product before installing and using.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Full HD IP Camera

---|---

Article number

|

WIFICI40CWT

Dimensions (l x w x h)

|

58 x 46 x 90 mm

Weight

|

0.6 kg

Ambient temperatures

|

–20 °C – 50 °C

Input power

|

5 VDC ; 1 A

Wireless connection

|

2.4G Wi-Fi, AP

Memory

|

MicroSD card (8 – 128 GB) (not included)

Resolution

|

1920 x 1080p

Viewing angle

|

122 degrees

Max. radio transmit power

|

18 dBm

Antenna gain

|

2 dBi

Frequency range

|

2412 – 2472 MHz

Main parts (image A)

A

1. Status indicator LED

2. Camera lens

3. Microphone

4. Reset button

5. MicroSD card slot

6. Speaker

7. Micro USB port

8. USB power adapter

9. Reset pin

10. Micro USB cable

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.
Unplug the product from the power source and other equipment if problems occur.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Consult the local laws and regulations for this product before installing and using.

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

|

Indication to explain the product is suitable for indoor use only.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Preparing the security camera

Use an SD card with a minimum of 8 GB and a maximum of 128 GB.

1. Insert the new microSD card into the microSD card slot A 5.

2. Connect the USB cable A 10 to the micro USB port A 7.

3. Connect A 10 to the USB power adapter.

4. Connect the USB power adapter to a power outlet to charge the camera.

The product switches on automatically.

Installing the Nedis SmartLife app

1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.

2. Open the Nedis Smartlife app on your phone.

3. Create an account with your e-mail address and tap Continue.

4. Enter the received verification code.

5. Create a password and tap Done.

6. Tap Add Home to create a SmartLife Home.

7. Set your location, choose the rooms you want to connect with and tap Done.

Connecting the product

1. Open the Nedis Smartlife app on your phone.

2. Tap + in the Nedis SmartLife app.

3. Select the device type you want to add from the list.

4. Confirm the status indicator LED A 1 is blinking.

5. Enter the Wi-Fi network data and tap Confirm.

6. Tap Continue and a QR-code will appear.

7. Hold your phone with a 15 – 20 cm distance in front of the camera.

8. If the camera has detected the QR-code, you will hear a sound.

9. Tap to confirm you heard the sound.

10. Give the camera a name and tap Done. A 1 will turn blue.

11. The product is now ready for use.

12. If the camera failed to connect, A 1 will be continuously red. To reset the camera, push the reset pin A 9 in the reset button A 4 for 5 seconds until you heard the sound. Then repeat step 1 to 10 closer to the router.

Important instructions to reduce false alarms

Do not place the camera facing the sun or any objects with bright lights.
The ideal viewing distance is 2 – 10 meters.
Do not place the camera close to frequently moving vehicles. The recommended distance between the camera and moving vehicles is 15 meters.
Stay away from air outlets, including air conditioner and heat transfer vents, etc.
Do not place the camera facing a mirror or highly reflective object.
Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones, in order to avoid wireless interference.

Use

The start screen of the Nedis SmartLife app
After making a successful connection with the security camera, the Nedis SmartLife app displays an overview of the products that are connected.
Select the desired product in the overview.

The overview screen of the security camera (image B)

Here you can use the functions of the product and change the settings.

The interface consists of the following buttons:

B

a. Back

b. The video mode.

c. Turn the sound on or off

d. Speak through the speaker of the security camera

e. Make a screenshot

f. Cloud storage

g. Play motion detected videos

h. Settings

i. Wi-Fi signal

j. View full screen

k. Start a video recording

l. Alarm on/off

Making video recordings and screenshots

You can make video recordings and screenshots on your phone, by tapping Record B k and Screenshot B e.

Video playback

Photo and video recordings are stored on your phone’s memory.

1. Open the Gallery on Android, or Photos on iOS. You will see an overview of photo and video recordings.

2. Open a photo or video recording to view or play it back.

Playing back motion detected videos

Motion detected videos are automatically saved on the microSD card. (If inserted in the camera).

1. Tap Playback B g to open the stored videos.

2. Tap a video file to play it back.

Adjusting the motion detecting distance

Go to the settings key B h, and tap Motion Detection Switch. Enable, disable or change the Motion Detection sensitivity.

Sensitivity

|

Detecting distance

---|---

Low

|

Up to 4 meters

Middle

|

Up to 6 meters

High

|

Up to 8 meters

Auto tracking

|

Automatic rotation to follow movement

Maintenance

Before cleaning and maintenance, switch off the product and disconnect the power.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFICI40CWT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/WIFICI40CWT#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands