Shen Zhen Cl Lighting Technology FWWDA4-25 WIFI Music Sync Ambient Lamp User Manual
- June 4, 2024
- Shen Zhen Cl Lighting Technology
Table of Contents
Shen Zhen Cl Lighting Technology FWWDA4-25 WIFI Music Sync Ambient Lamp
Charging Diagram
Attention: Charging before using it, for convenience to use it.
- Plug the adapter charging wire into the port of the base.
- The female magnetic suction is aligned with male base,charging starts with the indicator light on, and the light is off when fully charged.
Product Features
- Wi-Fi and Bluetooth connection APP control, the APP work with both Android and IOS system
- Intelligent speaker control
- Timer switch function
- Music function: External microphone with voice receiver
- Various color adjustment
- 1-100%: Stepless dimming 1-100%
- Elegant design
- Magnetic Charging
Parameter
Product Dimension
Wiring diagram
- Switch button: Single clik to turn ON/OFF the light (Only turn off the light, but WiFi still working, and the APP still can control the light) Double click to powered off both the light and the WiFi Long press for over 5 seconds to reset.
- USB charging wire
- Adapter port
- Indicator light: WiFi indicator light
- Indicator: red lighting means charging, light turn off when charing finished
Attention
- Do not put any metal around the controller, the metal will block the WiFi signals
- Make sure the input voltage and the wiring are correct
- The output voltage must be same as the working voltage of the ambient lamp, such as DC5V
Download APP
- Search the APP- “SMART LIFE”from Apple store or Google Play.
- Scan the QR code from the label or user manual.
- The APP compatible with Android 5.0 and IOS10.0 or higher version.
Log in / Register an account
Open the APP – “Smart Life”, sign up for a new account or log in with an
existing account.
APP connection
-
Preparation jobs: Power on the LED lamp and enter the home of APP, please make sure your mobile and the smart kits are connected to the same WIFI
-
Connect the LED lamp
Solution 1) : The LED lamp will flash after powered on, tap the button of “Add all devices” on the APP. The APP will popup an interface with a tips about the info of the LED lamp, tap the “Add” button, it will shows the interface of “Bluetooth devices”, then tap the “+” to next interface and log in with the WiFi password, the devices turn to connecting automatically, just wait untill pairing success and tap “Done” to enter into the mode control interface.(If solution 1 not suitable for your devices, please try solution 2 )
-
When the LED lamp not blink after powered on. Please press the function button for over 5 seconds, then the light turn to quick flash, enter into the APP and choose to add all the device in the corresponding room in the APP. Enter into the interface of adding lighting device and match the LED lamp
-
Solution 2) : The LED lamp will flash after powered on, tap the button of “Add all devices” on the APP. Enter into the interface of “Add manually” and choose “Lighting” then the corresponding “LED lamp” , we will turn to the interface of devices pairing, log in the correct WiFi name and password and tap “Next” (make sure all devices should be connected to same WiFi). Make sure the LED strip is under quick flash status, then tap “Next” to start pairing. Just wait untill pairing success and tap “Done” to enter into the mode control interface.
The UI is for reference only, please subject to the latest UI of the APP downloaded on your mobilephone.
Interface Introduction
- You can adjust the brightness and CCT under white light mode.
- Under color light mode, you could change to any RGB mixed color and adjust the brightness and saturability.
- Under scene mode,various scenes available for options, you can also DIY your preferable scenes.Under the music sync mode, the lights could synchronize change with the rhythm of music or voice that the smart devices received or detected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>