ELEIKO 3085600 Powerlifting Training Platform User Guide
- June 12, 2024
- ELEIKO
Table of Contents
ELEIKO 3085600 Powerlifting Training Platform
ELEIKO POWERLIFTING TRAINING PLATFORM – 3x2m
Art.no. 3085600
CONTENTS
- Read before installation and use
- Safety instructions
- List of components
- Assembly instructions
- Tools needed
- User guide
- Purpose
- General instructions for use
- Product specifications
- Care and maintenance
- Preventive maintenance and inspections
- Spare parts and service
- Warranty
READ BEFORE INSTALLATION AND USE
Install and use this equipment in a place where access and supervision are specifically controlled by the owner. Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all equipment is installed by a licensed contractor or an Eleiko installer. This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on proper usage of the equipment.
- All included warnings (labels) and instructions MUST be read before the use of any Eleiko equipment. Only use the equipment as it is intended.
- A user MUST get a medical examination and proper instructions before using any Eleiko equipment.
- DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not try to repair any equipment before consulting an Eleiko technician.
- DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko representative prior to any intervention.
- DO NOT overload the equipment and DO NOT try to exceed personal strength levels.
- Children under the age of 14 must be supervised by an adult.
- DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is removed. Replace damaged labels immediately.
- Eleiko packaging for products can be made of wood. Be aware of splinters! You MUST use protective gloves and proper work wear.
- Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use work wear including protective gloves and hard shoes.
- Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work wear and hard shoes.
LIST OF COMPONENTS
- 2x rubber tiles (3085600p1)
- 2x rubber tiles (3085600p2)
- 1x frame (3085537)
- 4x short connector (3001384-03)
- 4x long connector (3085380)
- 16x screw (2000747-L12)
ASSEMBLY INSTRUCTIONS **
**
Before assembly, make sure you have enough clearance on all sides of the equipment, not less than 0,6 meters. Take in account the accessibility to remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment:
- Allen Key Size 5
NOTE: Do not use electric power tools for assembly.
As the the rubber tiles have a tolerance of +/- 1% there could
be a small difference in size between them.
LOOSE SCREWS!
TIGHTEN FRAME AND SCREWS!
USER GUIDE **
**
PURPOSE
Protect equipment, facility and clearly define lifting space.
GENERAL INSTRUCTIONS FOR USE
- For indoor use only.
PRODUCT SPECIFICATION
- Product weight: 204 kg / 450 lbs
- Dimensions (L x W x H): 2080 x 3090 x 32 mm / 81,9 x 121,7 x 1,3 inches
CARE AND MAINTENANCE
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
- Platforms must be installed on a level solid subsurface.
- Platform use does not eliminate potential sub floor damage; extra protection may be needed to mitigate the impact force. We recommend 10mm rubber + 2x20mm plywood as an under layer. This must be evaluated and tested on-site before installation.
Regularly:
- Clean surfaces on the frames and tubes from dust and dirt.
- Check that all bolts between parts, walls and floors are properly tightened, according to recommendations.
- Check equipment for sharp edges. Replace parts with sharp edges.
- Check equipment structural frames and welds to ensure they are free from cracks, irregularities or any other abnormalities. If in doubt, consult an Eleiko representative before product use.
Cleaning and Care:
- Vacuum platforms to remove dirt and debris from lifting surfaces.
- Clean/mop platforms with a mild detergent as needed
- For disinfection, we recommend alcohol-free, bleach-free, and o-phenylphenol (OPP) ammonia free wipes. Alcohol and chlorine-based disinfectants can cause the rubber to deteriorate over time.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
For spare parts and service, please contact an Eleiko representative.
Contact Eleiko for spare parts and service: Eleiko Group AB | Klastorpsvägen
18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: +46 35 17 70 70
www.eleiko.com
WARRANTY
The Eleiko Powerlifting Training Platform is covered by a limited warranty.
For more information, please contact an Eleiko representative.
All products manufactured by ELEIKO are warranted to the original purchaser to
be free from defects in workmanship and / or materials under normal use or
service as follows:
- 10 years on structural frame welds (NOT on moving parts).
- 1 year on wear and tear parts.
Normal wear and tear do not fall under the 10-year warranty.