Freelap Tx Gate Pro Sports Timing System User Guide

: June 10, 2024
: freelap

Table of Contents

Welcome to Freelap World!
HOW DOES IT WORK ?
CREATE YOUR MYFREELAP ACCOUNT
ATTACH YOUR FXCHIP
PLACE YOUR TRANSMITTERS
- TX GATE PRO
- TX TRACK PRO
PLACE YOUR RELAY COAHC BLE
- EXAMPLES OF USE
CREATE YOUR WORKOUT USING MYFREELAP
BATTERIES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Freelap Tx Gate Pro Sports Timing System

Freelap Tx Gate Pro Sports Timing System

Welcome to Freelap World!

Congratulation in thinking outside the box and providing your team with a tool that will truly maximize their training experience!

HOW DOES IT WORK ?

Freelap® timing system is based on the emission and detection of electromagnetic fields and consists mainly of four elements:

TRANSMITTERS
Placed along the course, they are coded (START, LAP or FINISH) and emit electromagnetic fields.

CHIP
Worn by the skier, it detects the pulses of electromagnetic fields as the skier passes the transmitters, and measures time intervals between each transmitter.

RELAY
Placed after the FINISH transmitter, it receives the data from the chip and automatically transmits it via Bluetooth to your mobile device.

MYFREELAP APP
When the skier passes a transmitter in FINISH mode, the timing data is automatically recorded and instantly transmitted via Bluetooth to your mobile device via MyFreelap app. Data can also be synchronized, checked and exported on a computer via your myfreelap.com account.

CREATE YOUR MYFREELAP ACCOUNT

DOWNLOAD
Download MyFreelap app on your mobile device.

CREATE ACCOUNT
Click on “Register”, follow the process to create your account and log in.

DONE !
Your app is now ready to go!

ATTACH YOUR FXCHIP

Attach Your Fxchip

Attach the FxChip to the skier’s ski boot. The FxChip must be attached to the back of the skier’s ski boot, placed vertically and facing outward.
The FxChip turns on automatically when moved, and turns off after 10 minutes of inactivity.

PLACE YOUR TRANSMITTERS

Transmitters must be 10 meters apart. / Max. 11 transmistters on your course.

TX GATE PRO

Place Your Transmitters

Plant a stake, on the start line. Attach your Tx Gate Pro to your stake using its adjustable bands.
The stick should be placed at shins height, parallel to the ground.
Get ready on the start line, both shins just in front of the stick. Trigger the start by crossing the gate.
Tx Gate Pro has no button. It turns on automatically only a fraction of a second when the stick is activated.

TX TRACK PRO

Tx Track Pro

To turn on the transmitter, press the “ON/OFF” central button for 1 second.
Make short presses on central button to select the desired code: START = start transmitter / LAP = intermediate transmitter / FINISH = finish transmitter. Each press of the central button switches it to the next code. The LED of the selected code lights up.
Place the Tx Track Pro on the snow, at max. 3.5m of the skier’s passage. It is shaped like an arrow. Point the arrow towards the track (perpendicularly) to draw your 3.5 meters imaginary line of passage.

PLACE YOUR RELAY COAHC BLE

Place Your Relay Coahc Ble

To turn on the Relay Coach BLE, press the “ON/OFF” button.
Place your Relay Coach BLE: Clip on the Relay Coach BLE to a gate and position it after the finish line at a maximum of 10 meters.