Shen Zhen Cl Lighting Technology FWWSA1-1302 Smart RGBIC Ambient Light Instruction Manual
- June 6, 2024
- Shen Zhen Cl Lighting Technology
Table of Contents
smart RGBIC Ambient Light
Product features
| WIFI+IR control| | Various dream color modes include running water, rainbow,
etc.
---|---|---|---
| Voice and intelligent speaker control| | DIY seven color changing and
dimming
| Time switch| | Remote controllable after connecting to the internet
| Music sync
Parameters
Model No.|
Color
|
Input voltage
| Current
---|---|---|---
FWWSA1-1301|
RGB
|
5Vdc
| Max.1A
FWWSA1-1302| Max.2A
Product dimension
Install through the base bracket
-
Align the hole of the mounting base with the screw hole at the bottom of the lamp body, and adjust the bracket to a linear position.
-
Insert the screw into the mounting hole and tighten the screw with a hex wrench.
-
Check if the bottom of the lamp body close with the mounting surface of the bracket,
If it’s close to the mounting surface, adjust the direction of the bracket. -
After the lamp body is locked to the base, the swing angle cannot be left or right
|
---|---
The appearance of all products is subject to actual conditions and the pictures are for reference only.
- Tear the adhesive paper and stick it on the back of the bottom shell, There are 2 places in total.
- Wipe the surface to be attached, then tear off the other side of the centrifugal paper and stick it on.
Product functions diagram
①DC5V input connection port.
②IR receiver
③Lamp body
④Function button: Turn ON
Turn OFF(two short clicks)
Modes Change
Long press the button for over 5 seconds to reset or network pairing.
Attentions
- Use the DC5V power supply, Power on the lamps. (In order to ensure the lampwork properly, we recommend the USB port output over 1A of current).
- Install the WIFl controller correctly. Use 3M tape to fix it
- Application devices: Certified power adapter with USB2.0(with output current over 1A) or USB3.0.
Download APP
1: Search the APP- “SMART LIFE” from Apple Store or Google Play.
2: Scan the QR code from the label or user manual.
|
---|---
https://smartapp.tuya.com/smartlife
Android supports at least 5.0 system, iOS supports at least 10.0 system (App versions below 3.20 are iOS ≥ 9.0. Only suitable for mobile phones, not for tablets and other devices), Bluetooth devices ≥ V5.0.
Log in/Register an account
Open the APP – “Smart Life”, sign up for a new account or log in with an
existing account.
APP connection
- Preparation jobs: Power on the LED ambient lamp and enter the home of APP, please make sure your mobile and the smart kits are connected to the same WIFI.
- Connect the controller：
Solution 1): After powering on the strip, turn it on and off 3 times(or long- press the switch button for over 5 seconds), the strip will go into a status of quick flashing. Find the “+”(in the corresponding room of the APP) to add devices. If your mobile has already turned on Bluetooth before connecting the LED strip, then no need to turn on Bluetooth again, the APP will connect to the LED strip automatically. If your mobile didn’t turn on Bluetooth before connecting the LED strip, the APP will pop up an interface with tips to ask you to turn on Bluetooth. Then please choose “Allow”, then the Bluetooth function of your mobile will be turned on. After that, the APP will pop up tips with info on the LED strips, then choose “Go to add”. Will go into an interface of Bluetooth device, choose the “+” and go into next interface(Enter Wi-Fi password). Input the password of the WIFI and choose “Confirm”, then it will go into the status of “Connecting……”, you will need to wait for your mobile to pair with the controller at this step. Choose “Done” when it shows “Added successfully”, then go into operation modes. (If solution 1 is not suitable for your devices, please refer
to solution 2)
Solution 2): After powering on the strip, turn it on and off 3 times(or long- press the switch button for over 5 seconds), the strip will go into a status of quick flashing. Find the “+”(in the corresponding room of the APP) into the interface of “Add manually”. Then choose “lighting” to choose the correct smart devices and go into the interface of “Select 2.4 GHz Wi-Fi Network and enter password”. Enter the Wi-Fi password, then choose “Next” and wait until pairing success(make sure your mobile and the smart devices are in the same Wi-Fi networks). Then go into the interface of “Scanning devices”, after scanning success and choose “Next”, it will pop up the interface of “add successfully” and choose “Done” to go into the operation modes.
|
---|---
3. When connecting with the power supply, the led strip does not flash. Please press the function button for over 5 seconds, then the light flash, enter into the APP, and choose to add all the devices in the corresponding room in the APP. Enter into the interface of adding a lighting device and match the LED strip.
Interface introduction
1. APP preset scene types include: Quiet, Active, and Romantic.
①The quiet scenes include Film, Dating, sunset, and Christmas.
②The active scenes include: Romantic, Colorful, Dynamic, and Dream
③The romantic scenes include Rainbow, Flowing water.
2. Music modes
① Rhythm ② Roll ③ Energy ④ Spectrum
The APP could DIY various customized scenes. (The customized scenes will appear in the UI of scenes after setting.)
| |
---|---|---
※The APP interface, please subject to the latest version.
Third-party control
In the Smart Life APP: Find more service in the “Me” menu, and find “More
service”, you’ll find the third-party access service (Alexa/ Google
Assistant/Recent Xiaowei/ DuerOS/Dingdong, etc), select the service you need.
Connect to the third-party service device according to the operation guide.
Please contact customer service for any update of the product or APP.
How to create/dismiss device groups?
Please you do so:
- Tap a device in the device list to enter the device’s control panel.
- Tap the button in the upper right corner to enter the device editing page.
- Tap Create Group. On the Select Device page, all devices that have been added to the account and have the same model as the device are displayed.
- On the device group page, click the button in the upper right corner to enter the settings page, and click the “Dismiss Group” button at the bottom of the page to dismiss this device group.
- If you want to manage different types of devices or devices that don’t support groups, you can add these devices to one “Tap-To-Run/Automation” to meet your needs.
- If the group creation fails, please click to view the solution.
Unable to create a device group?
Please check in the following ways:
- Please click on the upper right corner of the device to enter the interface, and check if you can see the “Create Group” function.
- If you can see it, click on it and create a group.
- If you do not see “Create Group” on the device setting page, it means that the device does not support group settings (Not all types of equipment support group functions).
IR Music remote controller manual
Product introduction:
The 19 keys IR remote control could realize various dream color modes include
running water and music modes etc.
Parameters:
Power supply: 3V button cell
Control distance: 5-8 meters in an open area
Instructions of remote control:
Please remove the PVC insulation sheet from the end of the remote control
before using it. Please set the APP internet connection as a priority when the
light is blinking.
Features
| action|
Remote control buttons
---|---|---
ON/OFF| Short Press|
Music mode pause/beat| Short Press|
Speed/sensitivity| Short Press| **
Dynamic mode switching| Short Press|
Music mode| Short Press|
Automatic mode| Short Press| **
Brightness +/-| Short Press|
Static color switching| Short Press|
WRGB| Short Press|
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.