guzzanti GZ-30S Compressor Refrigerator Instruction Manual

guzzanti GZ-30S Compressor Refrigerator

Model No: GZ-30S, GZ-40S, GZ-40T
Energy Consumption: 0.208 kWh/24h (GZ-40S, GZ-40T), 0.164 kWh/24h (GZ- 30S)

Product Usage Instructions

1. Plug in the power cord of the product to a suitable electrical outlet.
2. Ensure that the product is placed on a stable and level surface.
3. To turn on the product, locate the power button and press it.
4. Adjust the temperature settings according to your preference by using the temperature control dial.
5. The product is equipped with multiple compartments for storing different items. Organize your items accordingly.
6. To store food items, place them inside the compartments and close the doors securely.
7. Keep the product clean by regularly wiping the exterior with a damp cloth and removing any spills or debris from the interior.
8. In case of any issues or malfunctions, refer to the troubleshooting section of the user manual or contact customer support for assistance.
9. To turn off the product, press the power button again and unplug the power cord from the electrical outlet.

Note: Refer to the user manual for detailed instructions on specific features and maintenance procedures.

WARNING

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
5. To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
6. When positioning the appliance, ensure the supply cord is not trapped or damaged.
7. Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
8. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
9. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
10. Do not use electrical appliances inside the drink storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
11. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
12. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
13. 13. This appliance is intended to be used in household and similar applications such as
    • staff kitchen areas in shops, offices and other working environments;
    • farm houses and by clients in hotels, motels and other residential type environments:
    • S bed and breakfast type environments;
    • catering and similar non-retail applications.
14. To avoid contamination of drink, please respect the following instructions:
    • Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
    • Clean regularly surfaces that can come in contact with drink and accessible drainage systems.
    • Clean water tanks if they have not been used for 48 h, flush the water system connected to a water supply if water has not been drawn for 5 days.
    • If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

Note: This appliance contains flammable foaming agent cyclopentane. Please avoid contact fire when you transport and use it. Please ask professional for servicing when the machine broke down. Please send it to your local appointed disposal station when you discard it.

When this appliance is used to the vehicle power:

1. The instructions for appliances having a Ill part of class lIl construction supplied from detachable power supply unit shall state that the appliance is only to be used with thepower supply unit provided with the appliance.
2. The instructions for class IlI appliances shall state that it must only be supplied at safetyextra low voltage corresponding to the marking on the appliance.

This instruction is notnecessary for battery-operated appliances if the battery is primary battery or secondarybattery charged outside of the appliance. When this appliance is used to AC power, please use the adapter to connect the AC power supply. When this appliance is used to DC power, please connect the vehicle power DC 12V or DC24V.

Correct disposal of this product

This symbol on the product, or in its packaging, indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council, your household waste disposal service, or the shop where you purchased the product.

SAFETY PRECAUTIONS

Do not touch the power plug when your hands are wet or your feet are in contact withwater!

• When the product is used in a car, if the product is connected to the main powersupply, it must be ensured that the power supply has a fuse.
• To ensure that the product is connected to the correct power supply voltage at all times, the product voltage parameter is on the parameter label at the bottom of theproduct.
• Do not place and use electrical products inside the refrigerator container.
• When the set temperature is less than or equal to 0 °C, do not place glass containers to avoid cracking.
• After unpacking the refrigerator, let it stand for more than 6 hours before powering on
• Ensure that the refrigerator is placed horizontally during operation, and the inclination angle is less than 5° for long-term operation.
• The refrigerator is well ventilated, and blinds are strictly prohibited to dissipate heat.
• There must be a certain space around the refrigerator. The back of the refrigerator is 2200mm and the side of the refrigerator is 2100mm.
• When water accumulates in the inner tank, do not turn the refrigerator upside down › pour water, just use the drain hole to drain.
• Appliances that use combustible thermal insulation foaming gas: The R1234YF refrigerant and cyclopentane foaming materials used in this refrigerator are both combustible materials. The waste refrigerator should be isolated from the fire source and cannot be burned. Please send it to a qualified professional recycling
• company for disposal. To avoid harm to the environment or cause other dangers.
• Do not store explosives, such as combustion-supporting sprays, in the box.
• This product is used for household and similar purposes, such as:
  • Kitchen areas in shops, offices or other workplaces;
  • Farm, hotel, motor hotel and residential environment;
  • Catering industry and similar non-retail industry applications.

PRODUCT FEATURES

• Adopting high-efficiency and energy-saving DC compressor and conversion module,
• high reliability, long service life, fast refrigerator cooling speed.
• Adopt a fluorine-free insulation layer, good insulation performance, low energy consumption.
• Dual purpose for car and home, use car DC12/24V or home AC power supply (adapter is required).
• Rapid ultra-low cooling to-20°C(base on 25 °C ambient te mprature).
• Intelligent protection system for car battery.
• Intelligent energy saving system.
• Partition setting inside the fridge, practical storage method of classification.
• The door can be opened on three sides with buckle lock device, which is more convenient to operate and use.

PARTS LIST

1. Refrigerator body *1
2. Manual *1
3. Cigarette lighter power cord *1
4. Adapter (optional)

FUSE INSTALLATION AND REPLACEMENT INSTRUCTIONS

1. Locate the fuse protection cover shown in the figure O, and carry out Shake left and right to remove the cover.
2. After removing the parts O, set aside and use needle-nose pliers to clamp Then pull out the fuse shown in 2.
3. Check whether the fuse is damaged, such as blown fuseNeed to replace a new fuse (specification: current 15AAutomotive grade fuses). If the fuse needs to be replaced, replace the new oneThe fuse 3 is inserted into the fuse holder, and then © the fuse is protectedlt can be installed after the outer cover is in place.

CONTROL PANEL OPERATION

Power switch: In the unlocked state, press and hold it for 2 seconds to shut down; when in the locked state, press and hold it for 2 seconds and then turn it on. Unlock button: This button is an anti-misoperation function key, after power on, the refrigerator all buttons turn to breathing display mode, then all keys can be operated during this time, if there is no operation within 20 seconds, the refrigerator will automatically turn on the anti- misoperation function (or press and hold the unlock button for 2 seconds and then manually turn on the anti-misoperation function), all the keys are locked after turning it on, press the unlock button for 2 seconds to unlock the refrigerator control system and enter the adjustable mode.
Temperature plus/minus key: temperature control, adjustable temperature range is -20 ~ 20°C.
Fahrenheit and Celsius temperature display switch: In the locked state, press the temperature plus and minus buttons at the same time for 3 seconds to switch between Fahrenheit and Celsius.
Battery voltage protection setting: in the keys unlock state, press and hold the unlock button and the switch key at the same time for more than 2 seconds to enter the battery voltage protection regulation system, select the voltage protection H1/H2/ H3, the default voltage protection is H2; enter the mode then press and hold the unlock button and the switch button at the same time for more than 2 seconds to adjust the protection. For detailed voltage protection parameters, see Appendix 1.
(This is the car battery voltage protection function; it is set to protect the car battery power under the normal operation of the refrigerator and prevent the car battery from being consumed too much and the vehicle cannot be started; the output voltage of different vehicles power sources is different, if the voltage protection value E1 appears on the display, please manually adjust the voltage protection according to the actual situation of the vehicle.)

RECOMMENDED STORAGE TEMPERATURE FOR COMMON ITEMS

COMMON PROBLEM AND FAILURE DISPLAY INSTRUCTIONS

1. The refrigerator does not work
   • Check whether there is a power supply or the voltage is correct;
   • Check whether the power plug is in good contact;
   • Whether the fuse is blown;
   • Check whether the power switch on the display operation panel is turned on;
   • The compressor is under protection after 3 minutes of startup;
2. The food in the refrigerator is frozen
   • The temperature setting is too low, increase the temperature appropriately.
3. Hear the sound of running water in the box
   • The sound of refrigerant flowing is normal.
4. Display error code and processing method
   • When the compressor control module displays the fault code, the refrigerator will not work until the fault is eliminated.The specific fault code corresponding to the troubleshooting method is described as follows.

Failure codes:

El

| ****

Voltage failure

| Low voltage protection code, lower the battery protection switch one level, H3 (high)-H2

(middle)-H1 (low) (see attached table 1 for details).

E2| Fan current failure| Fan overload protection, shut down and rest for 30 minutes and then turn on again.
E3| Compressor start failure| Compressor frequent start protection, shut down and reopen after 30 minutes

E4

| Compressor minimum speed failure| If the compressor load is too large or the motor speed is too low, shut it down and let it stand for 30 minutes before restarting.

ES

| ****

Controller temperature failure

| The temperature of the controller shell is too high (greater than 8S°C), put the refrigerator in a low­ temperature ventilated place, shut it down and let it stand for 30 minutes and then turn it on again; if it happens again, please contact after-sales persons.

E6

| ****

Controller hardware failure

| The controller cannot detect normal parameters, shut down and restart, if it reappears again, send back to detect.

EE

| ****

Short circuit of temperature sensor

| The temperature sensor is abnormal, and it is cooled in the default working mode. It will stop for 30 minutes and stop for 15 minutes without temperature control function. Check whether the temperature sensor terminal is off, if it appears again, please contact after-sales persons.

ELECTRIC DIAGRAM

used for AC power supply

used for DC power

TECHNICAL SPECIFICATION

PRODUCT FUNCTION DESCRIPTION

1. It is intended to be used exclusively for the cellar.
2. This refrigerating appliance is not suitable for freezing foodstuffs.
3. The cellar is recommended to be designed at 12 °C.
4. The shelves placed in factory mode is the most efficient use of energy for refrigerating appliances.
5. The following combination of shelves is recommended for energy to be used as efficiently as possible by the refrigeration unit.
6. When the surrounding temperature is 25 °C and the cellar has no load, it will take around 3.5 hours to decrease the cellars temperature from 25 °C to 12 °C.
7. The cellar is recommended to be designed at 12 °C.The energy consumption is shown in the table below. If the setting temperature is higher than 12 °C, the energy consumption will be lower. If the setting temperature is lower than 12 °C, the energy consumption will be higher.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC  SOLIDMENT

This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over these appliances to determined collection points. Alternatively, in some European Union states or other European countries you may return your appliances to the local retailer when buying an equivalent new appliance. Correct disposal of this product helps save valuable natural resources and prevents potential negative effects on the environment and human health, which could result from improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>