Keychron Q7 Custom Mechanical Keyboard User Manual

June 5, 2024
Keychron

Keychron Q7 Custom Mechanical Keyboard

Keychron Q7 Custom Mechanical Keyboard

Fully Assembled Version

Keychron Q7 Custom Mechanical Keyboard 1

Keyboard

  • * 1x Fully Assembled Keyboard

Including

  • * 1x Aluminum Case
    • 1x PCB
    • 1x Steel Plate
    • 1x Sound Absorbing Foam
    • 1x Case Foam
    • 12x Gaskets (10 Installed and 2 in the Box)
    • 5 Sets x Stabilizers
    • 1 Set x Keycaps (PBT Double-shot)
    • 1 Set x Switches (Gateron G Pro)

Cable

  • 1x Type-C to Type-C Cable
  • 1x Type-A to Type-C Adapter

Tools

  • 1x Switch Puller
  • 1x Keycap Puller
  • 1x Screwdriver
  • 1x Hex Key

Barebone Version

Keychron Q7 Custom Mechanical Keyboard 2

Keyboard Kit

  • * 1x Keyboard Kit (Without Keycaps & Switches

Including

  • * 1x Aluminum Case
    • 1x PCB
    • 1x Steel Plate
    • 1x Sound Absorbing Foam
    • 1x Case Foam
    • 12x Gaskets (10 Installed and 2 in the Box)
    • 5 Sets x Stabilizers

Cable

  • 1x Type-C to Type-C Cable
  • 1x Type-A to Type-C Adapter

Tools

  • 1x Switch Puller
  • 1x Keycap Puller
  • 1x Screwdriver
  • 1x Hex Key

QUICK START GUIDE

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.Keychron Q7 Custom Mechanical Keyboard 3

1. Switch To The Right System

Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.

Keychron Q7 Custom Mechanical Keyboard 4

 2. The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

 3. The Layers

There are five layers of key settings on the keyboard. The layer 0 is for the Mac system. The layer 1 is for the Windows system. The layer 2 is for the Mac Multimedia keys. The layer 3 is for the Windows Multimedia keys. The layer 4 is for the Function keys.

If your system toggle is switched to Mac, then the layer 0 will be activated.

If your system toggle is switched to Windows, then the layer 1 will be activated.

4. Multimedia Key and Function Key

Multimedia keysKeychron Q7 Custom Mechanical Keyboard
9

Function keysKeychron Q7 Custom Mechanical Keyboard 10

In order to get Multimedia Key, you need to press fn1 and In order to get Function Key, you need to press fn2 andKeychron Q7 Custom Mechanical
Keyboard 11

5. The Backlight

Press fn1+Q to change the lighting effect

Keychron Q7 Custom Mechanical Keyboard 12

Press fn1+tab to turn the backlight on/off

Keychron Q7 Custom Mechanical Keyboard 13

6. Adjust The Backlight Brightness

fn1+ WN to increase the backlight brightness

Keychron Q7 Custom Mechanical Keyboard 13

fn1 + S to decrease the backlight brightness

Keychron Q7 Custom Mechanical Keyboard 15

7. Adjust The Backlight Speed

Press fn1+T to increase the light effect speed

Keychron Q7 Custom Mechanical Keyboard 13

Press fn1 +G to decrease the light effect speed

Keychron Q7 Custom Mechanical Keyboard 13

8. Warranty

The keyboard is highly customizable and easy to be rebuilt. If anythin8 goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

9. Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

10. Factory Reset
**

Keychron Q7 Custom Mechanical Keyboard 15**

Troubleshooting? Don’t know what’s going on with the keyboard?
  • Try factory reset by pressing fn1 +J +Z (for 4 seconds)
  • Download the right firmware for your keyboard from our website.
  • Remove the power cable from the keyboard.
  • Remove the space bar keycap to find the reset button on the PCB.
  • Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
  • Flash the firmware with the QMK Toolbox.
  • Factory reset the keyboard again by pressing fn1 +J+ Z (for 4 seconds)
  • Step by step guide can be found on our website

Q7 CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Specifications

Layout| 70%
Switch type| ****

Mechanical

Width| 121 mm
Length| 341.4 mm
Front height| 20 mm (without keycaps)
Back height| 33.8 mm (without keycaps)
Front height| 31.5 mm (with OSA keycaps installed)
Back height| 43.1 mm (with OSA keycaps installed)
Keyboard feet height| 2.7mm
Angle| 6.5 degree

Q7 MECHANICAL KEYBOARD OVERVIEW

OVERVIEW

  1. Type-C Port
  2. Mac Layout
  3. Windows Layout

DEFAULT KEY LAYOUT

LAYER 0: This layer will be activated when your keyboard’s system toggle is switched to Mac.

LAYER 0

LAYER 1: This layer will be activated when your keyboard’s system toggle is switched to Windows.

LAYER 1

LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fn1/MO(2) key.

LAYER 2

LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fn1/MO(3) key.

LAYER 3

LAYER 4: This layer will be activated when you press the fn2/MO(4) key.

LAYER 4

KEY DESCRIPTION

Key Description

Ser-| Screen Brightness Decrease
Ser+| Screen Brightness Increase
Bright-| Backlight Decrease
Bright+| Backlight Increase
Prvs| Previous
Play| Play/Pause
Next| Next
Mute| Mute
Vol-| Volume Decrease


Vol+

| ****

Volume Increase

RGBToggle| Turn Backlight on/off

Key Description

RGBMd+| RGB Mode Next
RGBMd-| RGB Mode Previous
Hue+| Hue Increase
Hue-| Hue Decrease
RGBSPI| RGB Speed Increase
RGBSPD| RGB Speed Decrease
MO(l)| Layer 1 will be activated when holding this key
M0(2)| layer 2 will be activated

when holding this key

M0(3)| Layer 3 will be activated when holding this key
M0(4)| Layer 4 will be activated when holding this key

Third-party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of VWindows/macOS, functionalities of third Party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.

Certain fn keys or multimedia keys does not work under Windows/Android mode.
Functionalities of certain multimedia keys may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS.

Safety Precaution:

  • Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards.
  • Always keep the product dry to avoid corrosion.
  • Do not expose the product to extreme temperatures below-10°C (5°F) or above 50°C (131°F) to preserve the lifespan of the keyboard.

Keychron, Inc.

  • Dover, DE 19901, United States

Find us at:

https://www.keychron.com

Support@keychron.com

Facebook @keychron

Instagram @keychron

Twitter @keychronMK

Designed by Keychron  Made in China


Read More About….

Keychron Q7 Custom Mechanical Keyboard

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals