Keychron Q0 Plus Wired Full Aluminum Custom Number Pad User Manual
- May 15, 2024
- Keychron
Table of Contents
Keychron Q0 Plus Wired Full Aluminum Custom Number Pad
Fully Assembled Version
Keyboard
1x Fully Assembled Keyboard
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
3 Sets x Stabilizers
1 Set x Keycaps (PBT Double-shot)
1 Set x Switches
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key
Barebone Version
Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
3 Sets x Stabilizers
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key
Quick Start Guide
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest
VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our
support to get the instruction.
Warranty
The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components of keyboard during
the warranty period, we will only replace the defective parts of the keyboard,
not the whole keyboard.
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
-
Try factory reset by pressing o + 9 + 1 (for 4 seconds)
-
Download the right firmware for your keyboard from our website.
Remove the power cable from the keyboard. -
Remove the 110″ and 11.n keycap to find the reset button on the PCB.
-
Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
-
Flash the firmware with the QMK Toolbox.
-
Factory reset the keyboard again by pressing o + 9 + 1 (for 4 seconds)
- Step by step guide can be found on our website
QO PLUS CUSTOMIZABLE KEYBOARD SPECIFICATIONS
Specifications
| Layout | Numpad |
|---|---|
| Switch type | Mechanical |
| Width | 137mm |
| Length | 118.2 mm |
| Front height | 20.1 mm (without keycaps) |
30 mm (with keycaps installed)
Back height| 32.6 mm (without keycaps)
41.S mm (with keycaps installed)
Keyboard feet height| 1.9mm
Angle| 5.26degree
QO PLUS MECHANICAL KEYBOARD OVERVIEW
DEFAULT KEY LAYOUT:
LAYER 0: This layer will be activated when your keyboard is connected.
LAYER 1: This layer will be activated when you press the fn/M0(1) key.
KEY DESCRIPTION
| Ser- | Screen Brightness Decrease |
|---|---|
| Ser+ | Screen Brightness Increase |
| Bright- | Backlight Decrease |
| Bright+ | Backlight Increase |
| Prvs | Previous |
| Play | Play/Pause |
| Next | Next |
| Mute | Mute |
| Vol- | Volume Decrease |
| Vol+ | Volume Increase |
| RGB Toggle | Turn Backlight on/off |
| RGBMd+ | RGB Mode Next |
| RGBMd- | RGB Mode Previous |
| Hue+ | Hue Increase |
| Hue- | Hue Decrease |
| RGB SPI | RGB Speed Increase |
| RGB SPD | RGB Speed Decrease |
| MO(l) | Layer 1 will be activated when holding this key |
Third-party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS,
functionalities of third-party input tools may be affected while using the
keyboard. Please make sure your operating system and drivers are up to date.
Certain multimedia keys or function keys do not work.
Functions of certain multimedia keys may be disabled due to compatibility,
versions, brands, and drivers of devices.
- Multimedia Keys:
Function Keys: 
Safety Precaution:
Keep the product, accessories and packaging parts out of the reach of children
to prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C{5°F) or above
50°C{131 °F) to preserve the lifespan of the keyboard.
CUSTOMER SUPPORT
Search “Get the Q0 Plus keymap working on VIA” on the product page on our official website to download the JSON file if VIA does not automatically recognize keymap of the Q0 Plus.
VIA Software for macOS, Windows, Linux, please download it on the product page on our official website or on Github.
How to Use VIA on Your Keychron Q Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your-
keyboard
Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
[email protected]
@keychron
@keychron
@keychronMK
Designed by Keychron
Made in China