Keychron Q1 Pro Wireless Custom Mechanical Keyboard User Guide

Keychron Q1 Pro Wireless Custom Mechanical Keyboard User Guide

Product Overview

Connect Bluetooth

Switch toggle o Bluetooth

Press -+ 1 (for 4 seconds) and pair with device named Keychron Q1 Pro.

Connect Cable

Switch toggle to Cable

The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction. (VIA only works when the keyboard is connected by wire to the computer.)

The Layers

There are four layers of key settings on the keyboard. The layer 0 and layer 1 are for the Mac system. The layer 2 and layer 3 are for the Windows system.

If your system toggle is switched to Mac, then the layer O will be activated.

If your system toggle is switched to Windows, then the layer 2 will be activated. Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer (the layer 0). This is a common mistake people are making.

The Bacidight

Press fn + Q to change the lighting effect

Press fn + tab to turn the backlight on/off

Adjust The Back light Brightness

Press fn + W to increase the back light brightness

Press fn + S to decrease the back light brightness

Adiust The Back light Speed

Press fn + T to in crease the [ight effect speed

Press fn + G to decrease the light effect speed

Warranty

The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard?

1. Plug in the power cable and switch the keyboard to Cable mode.
2. Factory reset the keyboard by pressing fn +J+Z (for 4 seconds).
3. Download the right firmware and QMK Toolbox from our website.
4. Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
5. Hold the reset key first, then switch the keyboard to Cable mode. Release the reset key, and the keyboard will now enter DFU mode.
6. Flash the firmware with the QMK Toolbox.
7. Factory reset the keyboard again by pressing fn +J+Z (for 4 seconds).

Step by step guide can be found on our website.

Download the JSON file in the link below if VIA does not automaticallyrecognizekeymap of the Q1 Pro:
https://www.keychron.com/blogs/archived/how-to-factory-reset-or-flash-your- qmk-via-enabled-keychron-q1-pro-keyboard

VIA Software for macOS, Windows, Linux: https://usevia.app/#/

How to Use VIA on Your Keychron Q Pro Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your- keyboard

Q1 Pro Source Code, please search “source code” on the product pigeon our official website.

Please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following key caps.

References

• VIA
• How to Factory Reset or Flash Your QMK/VIA enabled Keychron Q1 Pro key
• How to use VIA to program your keyboard – Keychron | Mechanical Keyboards for Mac, Windows and Android

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>