Keychron Q5 Customizable Keyboard User Manual
- June 5, 2024
- Keychron
Table of Contents
Keychron Q5 Customizable Keyboard
Fully Assembled Version
- Keyboard
- 1x Fully Assembled Keyboard
- Including
- 1x Aluminum Case
- 1x PCB
- 1x Steel Plate
- 1x Sound Absorbing Foam
- 1x Case Foam
- 16x Gaskets (8 Installed and 8 in the Box) 6 sets x Stabilizers
- 1 set x Keycaps (PBT Double-shot)
- 1 set x Switches (Gateron G Pro)
Cable
- 1x Type-C to Type-C Cable
- 1x Type-A to Type-C Adapter
Tools
- 1x Switch Puller
- 1x Keycap Puller
- 1x Screwdriver
- 1x Hex Key
Barebone Version
- Keyboard Kit
- 1x Keyboard Kit (Without Keycaps & Switches) Including
- 1x Aluminum Case
- 1x PCB
- 1x Steel Plate
- 1x Sound Absorbing Foam
- 1x Case Foam
- 16x Gaskets (8 Installed and 8 in the Box)
- 6 sets x Stabilizers
Cable
- 1x Type-C to Type-C Cable
- 1x Type-A to Type-C Adapter
Tools
- 1x Switch Puller
- 1x Keycap Puller
- 1x Screwdriver
- 1x Hex Key
QUICK START GUIDE
If you are a Windows user, please find the appropriate keycaps in the box,
then follow the instructions below to find and replace the following keycaps.
-
Switch To The Right System
Please make sure the system toggle on the top left corner has been switched to the same system as your computer1s operating system.
-
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.
-
The Layers
-
There are four layers of key settings on the keyboard. The layer O and layer 1 are for the Mac system. The layer 2 and layer 3 are for the Windows system.
-
If your system toggle is switched to Mac, then the layer O will be activated.
-
If your system toggle is switched to Windows, then the layer 2 will be activated. Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer ( the layer O ). This is a common mistake people are making.
-
The Backlight
-
Adjust The Backlight Brightness
-
warranty
The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard. -
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself. -
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Try factory reset by pressing fn +J +Z (for 4 seconds)
- Download the right firmware for your keyboard from our website.
- Remove the power cable from the keyboard.
- Remove the space bar keycap to find the reset button on the PCB. © Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds) Step by step guide can be found on our website
CUSTOMIZABLE KEYBOARD SPECIFICATIONS
Specifications
Layout
| ****
96%
Switch type
| ****
Mechanical
Width
| 145 mm
Length
| ****
390.5 mm
Front height
| ****
20.2 mm (without keycaps)
Back height
| ****
33.4 mm (without keycaps)
Front height
| ****
30.9 mm (with OSA keycaps installed)
Back height
| ****
42.8 mm (with OSA keycaps installed)
Keyboard feet height| ****
2.4 mm
Angle| 5.3 degree
MECHANICAL KEYBOARD OVERVIEW
DEFAULT KEY LAYOUT:
LAYER 0: This layer will be activated when your keyboard’s system toggle
is switched to Mac. 
LAYER 1: This layer will be activated
when your keyboard’s system toggle is switched to Mac and press the fn/M0(1)
key. 
LAYER
2: This layer will be activated when your keyboard’s system toggle is
switched to Windows. LAYER 3: This layer will be activated
when your keyboard’s system toggle is switched to Windows and press the
fn/M0(3) key. 
KEY DESCRIPTION
KEY DESCRIPTION|
---|---
Key Description| | Key Description
Ser- Screen Brightness Decrease| RGBMd+| RGB
Mode Next
Ser+ Screen Brightness Increase| RGBMd-| RGB
Mode Previous
Bright- Backlight Decrease|
Hue+
| Hue Increase
Bright+ Backlight Increase|
Hue-
| Hue Decrease
Prvs Previous| RGBSPI| RGBSpeed Increase
Play Play/Pause| RGBSPD| RGBSpeed Decrease
Third party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS,
functionalities of third Party input tools may be affected while using the
keyboard. Please make sure your operating system and drivers are up to date.
Certain fn keys or multimedia keys does not work under Windows/Android
mode.
Functionalities of certain multimedia keys may be disabled due to
compatibility, versions, brands and drivers of Windows/Android OS.
Safety Precaution:
Keep the product, accessories and packaging parts out of reach of children to
prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C (5° F) or above
50°C (131 ° F) to preserve the lifespan of the keyboard.
Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
Designed by Keychron Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>