MEAN WELL HRP-150N 150W Single Output with PFC Function Instruction Manual

: June 5, 2024
: MEAN WELL

Table of Contents

Features
Applications
SPECIFICATION
**Block Diagram
Function Manual
Mechanical Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

150W Single Output with PFC Function
Instruction Manual

Features

Universal AC input / Full range
Built-in active PFC function, PF>0.95
250% peak power capability
High efficiency up to 89%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
1U low profile 38mm
Built-in remote sense function
5 years warranty

Applications

Industrial automation machinery
Industrial control system
Mechanical and electrical equipment
Diagnostic or biological facilities
Test or measurement systems
Telecommunication equipment

■ GTIN CODE
MW Search :https://www.meanwell.com/serviceGTIN.aspx

■ Description
HRP-150N is a 150W single output type AC/DC power supply. This series operates for 85-264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by free air convection, working for the temperature up to 70°C without cover. Moreover, HRP-150N provides 250% short-duration peak power for motor applications and electromechanical loads requiring much higher power during start-up.
■ Model Encoding

HRP	Output voltage(12/24/36/48V)
150N	Rated wattage
24	Series name

SPECIFICATION

MODEL| HRP-150N- 2| HRP-150N-24| HRP-150N-36| HRP- 150N-48
---|---|---|---|---
OUTPUT| DC VOLTAGE| 12V| 24V| 36V| 48V
RATED CURRENT| 13A| 6.5A| 4.3A| 3.3A
CURRENT RANGE| 0 ~ 13A| 0 ~ 6.5A| 0 ~ 4.3A| 0 ~ 3.3A
RATED POWER| 156W| 156W| 154.8W| 158.4W
RIPPLE & NOISE (max.) Note.2| 120mVp-p| 150mVp-p| 200mVp-p| 240mVp-p
VOLTAGE ADJ. RANGE| 10.2 ~ 13.8V| 21.6 ~ 28.8V| 28.8 ~ 39.6V| 40.8 ~ 55.2V
VOLTAGE TOLERANCE Note.3| ±1.5%| ±1.5%| ±1.5%| ±1.5%
LINE REGULATION| ±0.3%| ±0.2%| ±0.2%| ±0.2%
LOAD REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME| 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.)| 16ms/230VAC 16ms/115VAC at full load

INPUT

OVERLOAD

| Normally works within 105 ~ 200% rated output power for more than 5 seconds and then shut down o/p voltage, re-power on to recover
Constant current limiting for output power >280% rated for more than 5 seconds and then shut down o/p voltage, re-power on to recover
OVERVOLTAGE| 14.4 ~ 16.8V| 30 ~ 34.8V| 41.4 ~ 48.6V| 57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT| WORKING TEMP.| -40 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -50 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.04%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
OPERATING ALTITUDE Note.6| 5000 meters

SAFETY & **EMC**

(Note 5)

EMC IMMUNITY

NOTE

All parameters NOT specially mentioned are measured at 230VAC input rated load, and 25℃ of ambient
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 1uf & 47uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation, and load
Derating may be needed under low input Please check the derating curve for more details.
The power supply is considered a component that will be installed into a final All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
The ambient temperature derating of 5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitudes higher than 2000m(6500ft).

※ Product Liability Disclaimer For detailed information, please refer to https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx)

**Block Diagram

**

PWM fosc: 90KHz

MEAN WELL HRP-150N 150W Single Output with PFC Function -
fIG

Derating Curve

MEAN WELL HRP-150N 150W Single Output with PFC Function - fIG
1

Output Derating VS Input Voltage

MEAN WELL HRP-150N 150W Single Output with PFC Function - fIG
2

Function Manual

Remote Sense
The remote sensing compensates for voltage drop on the load wiring up to 0.5V.
Peak Power
P av: Average output power (W)
P pk: Peak output power (W)
P npk: Non-peak output power(W)
P rated: Rated output power(W)
t : Peak power width(sec)
T : Period(sec)

For example (12V model) :
Vin = 100V Duty_max = 25%
Pav = Prated = 156W
Ppk = 300W
t ≤ 5 sec
T≧ 20 sec
MEAN WELL HRP-150N 150W Single Output with PFC Function - fIG
5 P npk≤ 108W