Kruger Matz KMPM6 Wireless earphones with power bank Owner’s Manual

Kruger Matz KMPM6 Wireless earphones with power bank Owner’s Manual

PRODUCT OVERVIEW

1. Touchpanel
2. Charging pins
3. LED indicator
4. Charging case/power bank
5. LED display
6. USB output
7. USB-C port

SAFETY INSTRUCTION

• Before connecting the earphones to the device, turn the volume down to avoid damaging ears. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.

• Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
  Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.

• Wireless devices can cause interference in aircraft. Please make sure that your earphones are powered off in flight.

• Use of this device near medical apparatuses may cause interference in their operation.

• Follow basic safety rules when operating the device.

• If you experience tinnitus, discomfort or other concerning behaviors, stop using the device immediately.

• Protect the earphones from shock and being dropped.

• Keep the device out of the reach of children.

• Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.

• Do not use this device if it has been damaged.

• Use only authorized accessories.

• Do not use fast charger to charge the case.

• Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.

• Before cleaning, turn off the device.

• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

AUTO ON/OFF

1. Open the charging case and take out the earphones, they will power on automatically.
2. Put the earphones back in the charging case, they will automatically power off.
   

MANUAL ON/OFF

1. Tap and hold the touch buttons on both earphones for about 3 seconds to power on the earphones.
2. Tap and hold the touch buttons on both earphones for about 6 seconds to power off the earphones.

PAIRING

1. Take out the earphones from the charging case. Left and right earphone will connect automatically and enter Bluetooth paring mode (LED on the left earphone flash red and blue).
2. Turn on the Bluetooth function on your smartphone and search for new Bluetooth devices.
3. Select and connect with this device (KM M6).
4. When earphones are paired with the device, both LEDs go off.

Notes:

• Every time the earphones are taken out from the charging case, they will connect to last connected device automatically. Please note, your device must be on with Bluetooth function turned on.
• When the earphones disconnect from the device due to exceeding the allowed distance, they will automatically reconnect within one minute when they get back into distance.
• If pairing is not completed within 3 minutes, the earphones will turn off automatically.
• Mono mode: You can use just one of the earphones. After pairing the earphones with the device, place one of the earphones back into charging case or turn it off. The second earphone will stay connected with the device.

OPERATION

LEFT

• Play/pause; answer/hang up: tap twice
• Reject a call: tap and hold for about 2 seconds
• Previous track: tap and hold for about 1,5 second
• Enable voice assistant: tap three times

RIGHT

• Play/pause; answer/hang up: tap twice
• Reject a call: tap and hold for about 2 seconds
• Next track: tap and hold for about 1,5 second
• Enable voice assistant: tap three times

CHARGING

Note: Before use, remove the protective film from the charging pins.

Charging the earphones

1. Place both earphones in the charging case. Pay attention to match the L and R symbols on the earphones and on the charging case. Charging starts automatically- red LED on the earphones flash.
2. When the earphones are fully charged, red LED goes off.
   Note: If the earphones are not going to be used for a long time, charge them every 3 months.

Charging the charging case/power bank

1. Connect the USB-C plug of the USB cable to the USB-C port of the charging case. Connect the other plug to the AC adapter or a comapatible PC USB port.
2. The digits on the LED display flash during charging.
3. When the battery is fully charged, the display shows [100].

Charging the external devices

1. Connect the external device to the USB output of the charging case/power bank.
2. Charging starts automatically. Check the charging case/power bank battery level on the LED display

SPECIFICATION

• Speaker size: 13 mm
• Frequency response: 20 Hz – 20 kHz
• Impedance: 32 Ohm +/- 15% (1 kHz)
• Sensitivity: 102 dB +/- 3 dB (1 kHz)
• THD: =< 3% (1 kHz)
• Bluetooth version: 5.1 + EDR
• Bluetooth range: up to 10 m
• Bluetooth profiles: AVRCP, A2DP, HSP, HFP
• Built in microphone
• Microphone sensitivity: 102 dB +/- 3 dB
• LED display (battery level)
• Call management
• Music playback
• Ports: USB, USB-C
• Playback/talk time: up to 5 h
• Charging   time:
• Earphones: approx. 1,5 h
• Charging case/ power bank: up to 4 h
• Charging voltage: 5 V / 1 A
• Battery capacity:
• Earphones: 2x 25 mAh
• Charging case/ power bank: 2200 mAh
• In set: charging case/ power bank, USB cable

Lechpol Electronics Leszek Sp.k. hereby declares that Wireless Earphones KMPM6 are consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.pl

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

http://www.krugermatz.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>